OID reference
1.3.6.1.4.1.629.204.1.3.1.1.9
Byte 92, bit 4 Externally Calibrated Two calibration options are possible if bit 6 has been set indicating that digital diagnostic monitoring has been implemented. If bit 4 is set, the reported values are A/D counts which must be converted to real world units using calibration values read using 2 wire serial address 1…
Identification
{1 3 6 1 4 1 629 204 1 3 1 1 9}
| Value | Name |
|---|---|
| 1 | no |
| 2 | yes |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: nbsSffMsaPhysicalIfIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.629.204.1.3.1.1.9
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
nbsSffDiagsExternallyCalibrated OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Byte 92, bit 4 Externally Calibrated
Two calibration options are possible if bit 6 has been set
indicating that digital diagnostic monitoring has been
implemented. If bit 4 is set, the reported values are A/D
counts which must be converted to real world units using
calibration values read using 2 wire serial address
1010001X (A2h) from bytes 56 to 95."
REFERENCE "Specification for Diagnostic monitoring interface for
optical transceiver (SFF-8472 rev 10.3), Table 3.9"
::= { nbsSffDiagsEntry 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Byte 92, bit 4 Externally Calibrated Two calibration options are possible if bit 6 has been set indicating that digital diagnostic monitoring has been implemented. If bit 4 is set, the reported values are A/D counts which must be converted to real world units using calibration values read using 2 wire serial address 1010001X (A2h) from bytes 56 to 95.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: nbsSffDiagsExternallyCalibrated
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"nbsSffDiagsExternallyCalibrated",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"no",
"(",
"1",
")",
",",
"yes",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Byte 92, bit 4 Externally Calibrated Two calibration options are possible if bit 6 has been set indicating that digital diagnostic monitoring has been implemented. If bit 4 is set, the reported values are A/D counts which must be converted to real world units using calibration values read using 2 wire serial address 1010001X (A2h) from bytes 56 to 95.\"",
"REFERENCE",
"\"Specification for Diagnostic monitoring interface for optical transceiver (SFF-8472 rev 10.3), Table 3.9\"",
"::=",
"{",
"nbsSffDiagsEntry",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"no",
1
],
[
"yes",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Byte 92, bit 4 Externally Calibrated Two calibration options are possible if bit 6 has been set indicating that digital diagnostic monitoring has been implemented. If bit 4 is set, the reported values are A/D counts which must be converted to real world units using calibration values read using 2 wire serial address 1010001X (A2h) from bytes 56 to 95."
],
[
"REFERENCE",
"Specification for Diagnostic monitoring interface for optical transceiver (SFF-8472 rev 10.3), Table 3.9"
],
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: NBS-SFF-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'NBS-MIB': ['nbs', 'NbsTcMHz'], 'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'OBJECT-IDENTITY'], 'NBS-CMMCENUM-MIB': ['NbsCmmcChannelBand']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629.204.1.3.1.1.1 | nbsSffDiagsRateIdentifier | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.2 | nbsSffDiagsLinkLengthOm3 | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.3 | nbsSffDiagsLaserWavelength | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.4 | nbsSffDiagsLROutputImplemented | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.5 | nbsSffDiagsPowerLevelDeclaration | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.6 | nbsSffDiagsCooledTranDeclaration | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.7 | nbsSffDiagsAddressChangeRequired | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.8 | nbsSffDiagsPowerMeasurementType | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.10 | nbsSffDiagsInternallyCalibrated | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.11 | nbsSffDiagsDDMonitoringImplemented | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.12 | nbsSffDiagsOptRateSelectControl | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.13 | nbsSffDiagsOptAppSelectControl | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.14 | nbsSffDiagsOptSoftRSControlMon | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.15 | nbsSffDiagsOptSoftRxLoSMonitoring | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.16 | nbsSffDiagsOptSoftTxFaultMonitoring | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.17 | nbsSffDiagsOptSoftTxDisable | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.18 | nbsSffDiagsOptAlarmWarningFlags | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.19 | nbsSffDiags8472Compliance | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.20 | nbsSffDiagsTemperature | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.21 | nbsSffDiagsTempLowAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.22 | nbsSffDiagsTempLowWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.23 | nbsSffDiagsTempHighWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.24 | nbsSffDiagsTempHighAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.25 | nbsSffDiagsVoltage | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.26 | nbsSffDiagsVoltLowAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.27 | nbsSffDiagsVoltLowWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.28 | nbsSffDiagsVoltHighWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.29 | nbsSffDiagsVoltHighAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.30 | nbsSffDiagsBiasCurrent | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.31 | nbsSffDiagsBiasLowAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.32 | nbsSffDiagsBiasLowWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.33 | nbsSffDiagsBiasHighWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.34 | nbsSffDiagsBiasHighAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.35 | nbsSffDiagsTxPower | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.36 | nbsSffDiagsTxPowerLowAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.37 | nbsSffDiagsTxPowerLowWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.38 | nbsSffDiagsTxPowerHighWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.39 | nbsSffDiagsTxPowerHighAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.40 | nbsSffDiagsRxPower | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.41 | nbsSffDiagsRxPowerLowAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.42 | nbsSffDiagsRxPowerLowWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.43 | nbsSffDiagsRxPowerHighWarn | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.44 | nbsSffDiagsRxPowerHighAlarm | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.45 | nbsSffDiagsDataReadyBarState | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.46 | nbsSffDiagsRxLosState | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.47 | nbsSffDiagsTxFaultState | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.48 | nbsSffDiagsSoftRateSelect | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.49 | nbsSffDiagsRateSelectState0 | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.50 | nbsSffDiagsRS1State | 0 | 0 | |
| 1.3.6.1.4.1.629.204.1.3.1.1.51 | nbsSffDiagsSoftTxDisableSelect | 0 | 0 |