OID reference

dataPortSpeed

1.3.6.1.4.1.6368.2.3.2.1.5

Description

This object allows specification of options for three areas: crossover Normally, DTE and hub sockets are wired such that they can connect with a straight-through cable, that is the hub has RX and TX circuits swapped (it has internal crossover). If a DTE must be connected directly to another DTE (or hub port to a port …

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.6368.2.3.2.1 (dataPortEntry)
Node code
5
Node name
dataPortSpeed
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.6368.2.3.2.1.5
URN notation
urn:oid:1.3.6.1.4.1.6368.2.3.2.1.5
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 6368 2 3 2 1 5}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) schmidtelecom(6368) pegasusMibModule(2) data(3) dataPortTable(2) dataPortEntry(1) dataPortSpeed(5)}
OID-IRI notation
  • /1/3/6/1/4/1/6368/2/3/2/1/5
  • /ISO/Identified-Organization/6/1/4/1/6368/2/3/2/1/5
  • /ISO/3/6/1/4/1/6368/2/3/2/1/5
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/6368/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/identified-organization/dod/internet/private/enterprise/schmidtelecom/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/identified-organization/dod/internet/private/enterprises/6368/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/identified-organization/dod/internet/private/enterprises/schmidtelecom/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/6368/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/schmidtelecom/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/identified-organization/dod/internet/private/vendor-objects/6368/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/identified-organization/dod/internet/private/vendor-objects/schmidtelecom/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/org/dod/internet/private/enterprise/6368/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/org/dod/internet/private/enterprise/schmidtelecom/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/org/dod/internet/private/enterprises/6368/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/org/dod/internet/private/enterprises/schmidtelecom/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/org/dod/internet/private/ldap-enterprise/6368/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/org/dod/internet/private/ldap-enterprise/schmidtelecom/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/org/dod/internet/private/vendor-objects/6368/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • /iso/org/dod/internet/private/vendor-objects/schmidtelecom/pegasusMibModule/data/dataPortTable/dataPortEntry/dataPortSpeed
  • Additional combinations skipped.

SNMP properties

Value type
DataPortSpeedEnum
Maximum access defined by MIB
read-write
Status in MIB
current

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

dataPortSpeed OBJECT-TYPE
  SYNTAX      DataPortSpeedEnum
  MAX-ACCESS  read-write
  STATUS      current
  DESCRIPTION
      "This object allows specification of options for three areas:

      crossover    Normally, DTE and hub sockets are wired such that they can
                   connect with a straight-through cable, that is the hub has
                   RX and TX circuits swapped (it has internal crossover). If
                   a DTE must be connected directly to another DTE (or hub port
                   to a port on another hub), a crossover cable must be used.
                   The data card trunk interfaces have an automatic crossover
                   function, which turns on or off crossover. Any sort of cable
                   can then be used to connect to any sort of device (DTE
                   or hub).

      duplex mode  If duplex mode is full duplex, transmission is allowed while
                   data are received. With half duplex, transmission must wait
                   until the receiver is idle.

      speed        The port can operate in 10 or 100 MBits per second.


      The values possible for this variable are:

      autoCrossoverAndPortSpeed(1)   Allows the port to negotiate speed,
                                     duplex mode, and to enable or disable
                                     the internal crossover function.

      autoNegotiationPortSpeed(2)    Allows the port to negotiate speed and
                                     and duplex mode. Internal crossover is on
                                     - a straight-through cable is needed to
                                     connect to a DTE (PC), a crossover cable
                                     is needed to connect to a repeater or hub.

      base100TFullDuplex(3)          Speed is set to 100 MBits per second, with
                                     full duplex. Internal crossover is on.

      base100THalfDuplex(4)          Speed is set to 100 MBits per second, with
                                     half duplex. Internal crossover is on.

      base10TFullDuplex(5)           Speed is set to 10 MBits per second, with
                                     full duplex. Internal crossover is on.

      base10THalfDuplex(6)           Speed is set to 10 MBits per second, with
                                     half duplex. Internal crossover is on."
  REFERENCE
      "IEEE 802.3, section 14.5.2: The Crossover Function."
  ::= { dataPortEntry 5}

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This object allows specification of options for three areas: crossover Normally, DTE and hub sockets are wired such that they can connect with a straight-through cable, that is the hub has RX and TX circuits swapped (it has internal crossover). If a DTE must be connected directly to another DTE (or hub port to a port on another hub), a crossover cable must be used. The data card trunk interfaces have an automatic crossover function, which turns on or off crossover. Any sort of cable can then be used to connect to any sort of device (DTE or hub). duplex mode If duplex mode is full duplex, transmission is allowed while data are received. With half duplex, transmission must wait until the receiver is idle. speed The port can operate in 10 or 100 MBits per second. The values possible for this variable are: autoCrossoverAndPortSpeed(1) Allows the port to negotiate speed, duplex mode, and to enable or disable the internal crossover function. autoNegotiationPortSpeed(2) Allows the port to negotiate speed and and duplex mode. Internal crossover is on - a straight-through cable is needed to connect to a DTE (PC), a crossover cable is needed to connect to a repeater or hub. base100TFullDuplex(3) Speed is set to 100 MBits per second, with full duplex. Internal crossover is on. base100THalfDuplex(4) Speed is set to 100 MBits per second, with half duplex. Internal crossover is on. base10TFullDuplex(5) Speed is set to 10 MBits per second, with full duplex. Internal crossover is on. base10THalfDuplex(6) Speed is set to 10 MBits per second, with half duplex. Internal crossover is on.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

dataPortSpeed · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: dataPortSpeed

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dataPortSpeed",
    "OBJECT-TYPE",
    "SYNTAX",
    "DataPortSpeedEnum",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object allows specification of options for three areas: crossover Normally, DTE and hub sockets are wired such that they can connect with a straight-through cable, that is the hub has RX and TX circuits swapped (it has internal crossover). If a DTE must be connected directly to another DTE (or hub port to a port on another hub), a crossover cable must be used. The data card trunk interfaces have an automatic crossover function, which turns on or off crossover. Any sort of cable can then be used to connect to any sort of device (DTE or hub). duplex mode If duplex mode is full duplex, transmission is allowed while data are received. With half duplex, transmission must wait until the receiver is idle. speed The port can operate in 10 or 100 MBits per second. The values possible for this variable are: autoCrossoverAndPortSpeed(1) Allows the port to negotiate speed, duplex mode, and to enable or disable the internal crossover function. autoNegotiationPortSpeed(2) Allows the port to negotiate speed and and duplex mode. Internal crossover is on - a straight-through cable is needed to connect to a DTE (PC), a crossover cable is needed to connect to a repeater or hub. base100TFullDuplex(3) Speed is set to 100 MBits per second, with full duplex. Internal crossover is on. base100THalfDuplex(4) Speed is set to 100 MBits per second, with half duplex. Internal crossover is on. base10TFullDuplex(5) Speed is set to 10 MBits per second, with full duplex. Internal crossover is on. base10THalfDuplex(6) Speed is set to 10 MBits per second, with half duplex. Internal crossover is on.\"",
    "REFERENCE",
    "\"IEEE 802.3, section 14.5.2: The Crossover Function.\"",
    "::=",
    "{",
    "dataPortEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "DataPortSpeedEnum"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object allows specification of options for three areas: crossover Normally, DTE and hub sockets are wired such that they can connect with a straight-through cable, that is the hub has RX and TX circuits swapped (it has internal crossover). If a DTE must be connected directly to another DTE (or hub port to a port on another hub), a crossover cable must be used. The data card trunk interfaces have an automatic crossover function, which turns on or off crossover. Any sort of cable can then be used to connect to any sort of device (DTE or hub). duplex mode If duplex mode is full duplex, transmission is allowed while data are received. With half duplex, transmission must wait until the receiver is idle. speed The port can operate in 10 or 100 MBits per second. The values possible for this variable are: autoCrossoverAndPortSpeed(1) Allows the port to negotiate speed, duplex mode, and to enable or disable the internal crossover function. autoNegotiationPortSpeed(2) Allows the port to negotiate speed and and duplex mode. Internal crossover is on - a straight-through cable is needed to connect to a DTE (PC), a crossover cable is needed to connect to a repeater or hub. base100TFullDuplex(3) Speed is set to 100 MBits per second, with full duplex. Internal crossover is on. base100THalfDuplex(4) Speed is set to 100 MBits per second, with half duplex. Internal crossover is on. base10TFullDuplex(5) Speed is set to 10 MBits per second, with full duplex. Internal crossover is on. base10THalfDuplex(6) Speed is set to 10 MBits per second, with half duplex. Internal crossover is on."
    ],
    [
      "REFERENCE",
      "IEEE 802.3, section 14.5.2: The Crossover Function."
    ],
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.6368)

Poltera Gian Lucas

Siblings (5)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.6368.2.3.2.1.1 dataPortNumber00
1.3.6.1.4.1.6368.2.3.2.1.2 dataPortAdminState00
1.3.6.1.4.1.6368.2.3.2.1.3 dataPortOperState00
1.3.6.1.4.1.6368.2.3.2.1.4 dataPortAvailabilityStatus00
1.3.6.1.4.1.6368.2.3.2.1.6 dataPortFlowControl00