Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"opticsIMEthAFRCompensation",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\" The data encapsulation of traffic from UNI to MPLS NNI, will be processed by NE to remove or add some overhead according to flow classification and related policy. Below is key Ethernet data encapsulation used with whole data path from UNI to MPLS NNI: L1 Ethernet Packet include: Preamble,SFD, L2 Ethernet Frame, IPG. This is typical characteristics at physical Ethernet Interface for UNI. L2 Ethernet Frame include: MAC DA/SA,optional 802.1ad/8021q VLAN tag,EtherType,Payload and FCS fields. This is typical characteristics processed by Switch. L1 MPLS Packet include: Preamble, SFD, MAC DA/SA, optional VLAN Tag,EtherType, TUNNEL label, PW label,Optional CW, L2 Ethernet Frame (with optional VLAN operation), IPG. This is typical characteristics at physical Ethernet Interface for MPLS NNI. AFR (admitted fractional Rate),referred as opticsIMEthAdmittedFractionalRate, is based on the traffic metering to trigger pause generation when AFR is reached. The default metering of traffic is applicable for L2 Ethernet frame, which remove 20bytes Preamble/SFD/IPG packet from L1 Ethernet Packet at physical interface, i.e. not based on metering of ifSpeed (refer to opticsIMEthAdmittedFractionalRate description). This de facto behaviour is deviated from AFR original definition. When AFR is applicable for bandwidth shaping with Ingress or Egress physical interface, the removed or appended Overhead versus Ethernet Frame shall be compensated to calibrate the traffic metering mechanism to reflect the traffic rate at Ingress or Egress interface based on the measurement of Ethernet Frames of ingress traffic per port. The value of opticsIMEthAFRCompensation, is defined to indicate the additional byte number shall be taken into account of metering of traffic rate. In order to calibration of traffic rate to ingress physical interface speed, i.e. Ethernet packet rate, 20 bytes (Preamble/SFD/IPG) shall be compensated; In order to calibration of traffic rate to Egress MPLS physical interface speed, i.e. MPLSIF packet rate, below added bytes shall be compensated: Ingress ETS flow VLAN operation (Optional) +4 bytes/VLAN Push -4 bytes/VLAN PoP PW CW (Optional) +4 bytes/enable mode MPLS frame +22bytes(DA/SA/EtherType/TUNNEL label/PW label) L2 encapsulation (Optional) +4 bytes(802.1Q or 802.1ad VLAN tag) Ethernet Packet Overhead +20bytes(Preamble/SFD/IPG) Without the compensation of this value, the AFR indicates the threshold value of admitted bandwidth for Ingress traffic measured with Ethernet Frame. With the compensation of this value, the Admitted fractional rate indicates the threshold value of admitted bandwidth for ingress or egress traffic measured with Ethernet Packet on the associated Ingress or Egress physical Interface. The default value shall be 0 to compatible with previous MIB definition. \"",
"::=",
"{",
"opticsIMEthConfEntry",
"25",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The data encapsulation of traffic from UNI to MPLS NNI, will be processed by NE to remove or add some overhead according to flow classification and related policy. Below is key Ethernet data encapsulation used with whole data path from UNI to MPLS NNI: L1 Ethernet Packet include: Preamble,SFD, L2 Ethernet Frame, IPG. This is typical characteristics at physical Ethernet Interface for UNI. L2 Ethernet Frame include: MAC DA/SA,optional 802.1ad/8021q VLAN tag,EtherType,Payload and FCS fields. This is typical characteristics processed by Switch. L1 MPLS Packet include: Preamble, SFD, MAC DA/SA, optional VLAN Tag,EtherType, TUNNEL label, PW label,Optional CW, L2 Ethernet Frame (with optional VLAN operation), IPG. This is typical characteristics at physical Ethernet Interface for MPLS NNI. AFR (admitted fractional Rate),referred as opticsIMEthAdmittedFractionalRate, is based on the traffic metering to trigger pause generation when AFR is reached. The default metering of traffic is applicable for L2 Ethernet frame, which remove 20bytes Preamble/SFD/IPG packet from L1 Ethernet Packet at physical interface, i.e. not based on metering of ifSpeed (refer to opticsIMEthAdmittedFractionalRate description). This de facto behaviour is deviated from AFR original definition. When AFR is applicable for bandwidth shaping with Ingress or Egress physical interface, the removed or appended Overhead versus Ethernet Frame shall be compensated to calibrate the traffic metering mechanism to reflect the traffic rate at Ingress or Egress interface based on the measurement of Ethernet Frames of ingress traffic per port. The value of opticsIMEthAFRCompensation, is defined to indicate the additional byte number shall be taken into account of metering of traffic rate. In order to calibration of traffic rate to ingress physical interface speed, i.e. Ethernet packet rate, 20 bytes (Preamble/SFD/IPG) shall be compensated; In order to calibration of traffic rate to Egress MPLS physical interface speed, i.e. MPLSIF packet rate, below added bytes shall be compensated: Ingress ETS flow VLAN operation (Optional) +4 bytes/VLAN Push -4 bytes/VLAN PoP PW CW (Optional) +4 bytes/enable mode MPLS frame +22bytes(DA/SA/EtherType/TUNNEL label/PW label) L2 encapsulation (Optional) +4 bytes(802.1Q or 802.1ad VLAN tag) Ethernet Packet Overhead +20bytes(Preamble/SFD/IPG) Without the compensation of this value, the AFR indicates the threshold value of admitted bandwidth for Ingress traffic measured with Ethernet Frame. With the compensation of this value, the Admitted fractional rate indicates the threshold value of admitted bandwidth for ingress or egress traffic measured with Ethernet Packet on the associated Ingress or Egress physical Interface. The default value shall be 0 to compatible with previous MIB definition."
],
null,
null,
null,
null
]
}