alarmAvailabilityStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The availability status attribute is set-valued and read-only.
This status attributes allows to further qualify the operational state.
Combinations of the states described below are possible. They are
defined by adding the the contained state values.
Example: in-test + degraded = 2+8 = 10
Defined States:
0 = empty.
1 = powered off: The module is physically present but is not powered.
No functional resource is working (e.g. no software is downloaded).
This state can only be reached by certain modules
2 = in test: The resource is undergoing a test procedure.
If the administrative state is locked or shutting down then normal users are
precluded from using the resource and the control status attribute has the value
reserved for test. Tests that do not exclude additional users can be present in
any operational or administrative state but the reserved for test condition
should not be present.
4 = faulty: The module is out of service due to an alarm which will disappear autonomously
after a recovery action has been performed successfully. A recovery action may be
local to the module, performed by the O&M SW or by the operator.
8 = degraded: The service available from the resource is degraded in some respect,
such as in speed or operating capacity. Failure of a test or an unacceptable
performance measurement has established that some or all services are not functional
or are degraded due to the presence of a defect. However, the resource remains
available for service, either because some services are satisfactory or because
degraded service is preferable to no service at all. Object specific attributes
may be defined to represent further information indicating, for example, which
services are not functional and the nature of the degradation.
An example is the loss of an RF amplifier causing a reduced power in a given cell.
The operational state is enabled.
16 = dependency: The resource cannot operate because some other resource on which it
depends is (e.g. logical resource C for physical resource A) unavailable.
The operational state is disabled.
32 = failed: The resource has an internal fault that prevents it from operating. The
operational state is disabled."
View at oid-info.com
Automatically extracted from a module checked by a user of the Asnp syntax-checking tool
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.637.70.3.1.3.1.1 | alarmCounter | 0 | 0 | alarmCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the incremented alarmLastCh… |
| 1.3.6.1.4.1.637.70.3.1.3.1.2 | managedObjectInstance | 0 | 0 | managedObjectInstance OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Pointer to the Mib … |
| 1.3.6.1.4.1.637.70.3.1.3.1.3 | alarmTime | 0 | 0 | alarmTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the time at which the alar… |
| 1.3.6.1.4.1.637.70.3.1.3.1.4 | alarmType | 0 | 0 | alarmType OBJECT-TYPE SYNTAX INTEGER { communication ( 1 ) , qualityOfService ( 2 ) , processingError ( 3 ) , equipment ( 4 ) ,… |
| 1.3.6.1.4.1.637.70.3.1.3.1.5 | alarmSeverity | 0 | 0 | alarmSeverity OBJECT-TYPE SYNTAX INTEGER { none ( 0 ) , warning ( 1 ) , minor ( 2 ) , major ( 3 ) , critical ( 4 ) , cleared ( … |
| 1.3.6.1.4.1.637.70.3.1.3.1.6 | alarmId | 0 | 0 | alarmId OBJECT-TYPE SYNTAX Integer32 ( 3000001 .. 4000000 ) MAX-ACCESS read-only STATUS current DESCRIPTION "identification of … |
| 1.3.6.1.4.1.637.70.3.1.3.1.7 | alarmAdditionalInformation | 0 | 0 | alarmAdditionalInformation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "this parameter, wh… |
| 1.3.6.1.4.1.637.70.3.1.3.1.8 | alarmMonitoredAttribute | 0 | 0 | alarmMonitoredAttribute OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "textual precision of … |
| 1.3.6.1.4.1.637.70.3.1.3.1.9 | alarmOperationalState | 0 | 0 | alarmOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled ( 0 ) , enabled ( 1 ) } MAX-ACCESS read-only STATUS current DESCRIP… |
| 1.3.6.1.4.1.637.70.3.1.3.1.11 | numberOfFilteredAlarmsSinceLastReporting | 0 | 0 | numberOfFilteredAlarmsSinceLastReporting OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate… |
| 1.3.6.1.4.1.637.70.3.1.3.1.12 | lastFilteringTime | 0 | 0 | lastFilteringTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the UTC time at whi… |
| 1.3.6.1.4.1.637.70.3.1.3.1.13 | lastFilteringType | 0 | 0 | lastFilteringType OBJECT-TYPE SYNTAX INTEGER { none ( 0 ) , begin ( 1 ) , end ( 2 ) , pingpong ( 3 ) } MAX-ACCESS read-only STA… |