OID reference

tmnxOamEthCfmPingCtlRemoteMepId

1.3.6.1.4.1.6527.3.1.2.11.1.23.1.5

Description

The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote Maintenance association End Point Identifier (MEP ID) for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using tmnxOamEthCfmPingCtlTgtMacAddr)…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.6527.3.1.2.11.1.23.1 (tmnxOamEthCfmPingCtlEntry)
Node code
5
Node name
tmnxOamEthCfmPingCtlRemoteMepId
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.6527.3.1.2.11.1.23.1.5
URN notation
urn:oid:1.3.6.1.4.1.6527.3.1.2.11.1.23.1.5
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 6527 3 1 2 11 1 23 1 5}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) timetra(6527) timetraProducts(3) tmnxSRMIB(1) tmnxSRObjs(2) tmnxOamTestObjs(11) tmnxOamPingObjs(1) tmnxOamEthCfmPingCtlTable(23) tmnxOamEthCfmPingCtlEntry(1) tmnxOamEthCfmPingCtlRemoteMepId(5)}
OID-IRI notation
  • /1/3/6/1/4/1/6527/3/1/2/11/1/23/1/5
  • /ISO/Identified-Organization/6/1/4/1/6527/3/1/2/11/1/23/1/5
  • /ISO/3/6/1/4/1/6527/3/1/2/11/1/23/1/5
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/identified-organization/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/identified-organization/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/org/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/org/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/org/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/org/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/iso-identified-organization/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/iso-identified-organization/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/iso-identified-organization/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/iso-organization/dod/internet/private/enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/iso-organization/dod/internet/private/enterprises/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/iso-organization/dod/internet/private/ldap-enterprise/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId
  • /iso/iso-organization/dod/internet/private/vendor-objects/timetra/timetraProducts/tmnxSRMIB/tmnxSRObjs/tmnxOamTestObjs/tmnxOamPingObjs/tmnxOamEthCfmPingCtlTable/tmnxOamEthCfmPingCtlEntry/tmnxOamEthCfmPingCtlRemoteMepId

SNMP properties

Value type
Dot1agCfmMepIdOrZero
Maximum access defined by MIB
read-create, read-write
Status in MIB
current
Default value
0

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — Nokia networking MIB copies (LibreNMS/Observium Community)

Value type
Dot1agCfmMepIdOrZero
Maximum access defined by MIB
read-create
Status in MIB
current
Default value
0

Variant 2 — Nokia networking MIB copies (LibreNMS/Observium Community), Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

Value type
Dot1agCfmMepIdOrZero
Maximum access defined by MIB
read-write
Status in MIB
current
Default value
0

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

tmnxOamEthCfmPingCtlRemoteMepId · current

tmnxOamEthCfmPingCtlRemoteMepId  OBJECT-TYPE
    SYNTAX      Dot1agCfmMepIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote
         Maintenance association End Point Identifier (MEP ID) for the test.

         A non-zero unicast destination MAC address is required in each test frame
         sent for the test.  The destination MAC address can be specified directly
         (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using this
         object).

         Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and
         tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value.
         Otherwise, an attempt to administratively enable the test (using
         tmnxOamSaaCtlAdminStatus) will fail.

         Suppose this object is assigned a non-default value.  Then, at the
         start of each test run, SROS reads
         TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the
         destination MAC address to use for the test run.

         The following index values are used for the read:
            tmnxOamEthCfmPingCtlSrcMdIndex,
            tmnxOamEthCfmPingCtlSrcMaIndex,
            tmnxOamEthCfmPingCtlSrcMepId,
            tmnxOamEthCfmPingCtlRemoteMepId.

         If a destination MAC address is not found, no test frames will be sent
         for the test run.  The number of frames to be sent during a test run is
         configured using tmnxOamPingCtlProbeCount.

         Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of
         tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the
         hardware hosting the test's far end is replaced (meaning a new
         destination MAC address is present), the test does not need to be
         reconfigured."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmPingCtlEntry 5 }

tmnxOamEthCfmPingCtlRemoteMepId · current

tmnxOamEthCfmPingCtlRemoteMepId  OBJECT-TYPE
    SYNTAX      Dot1agCfmMepIdOrZero
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote
         Maintenance association End Point Identifier (MEP ID) for the test.

         A non-zero unicast destination MAC address is required in each test
         frame sent for the test.  The destination MAC address can be specified
         directly (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using
         this object).

         Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and
         tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value.
         Otherwise, an attempt to administratively enable the test (using
         tmnxOamSaaCtlAdminStatus) will fail.

         Suppose this object is assigned a non-default value.  Then, at the
         start of each test run, SROS reads
         TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the
         destination MAC address to use for the test run.

         The following index values are used for the read:
            tmnxOamEthCfmPingCtlSrcMdIndex,
            tmnxOamEthCfmPingCtlSrcMaIndex,
            tmnxOamEthCfmPingCtlSrcMdName,
            tmnxOamEthCfmPingCtlSrcMaName,
            tmnxOamEthCfmPingCtlSrcMepId,
            tmnxOamEthCfmPingCtlRemoteMepId.

         If a destination MAC address is not found, no test frames will be sent
         for the test run. The number of frames to be sent during a test run is
         configured using tmnxOamPingCtlProbeCount.

         Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of
         tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the
         hardware hosting the test's far end is replaced (meaning a new
         destination MAC address is present), the test does not need to be
         reconfigured."
    DEFVAL      { 0 }
    ::= { tmnxOamEthCfmPingCtlEntry 5 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote Maintenance association End Point Identifier (MEP ID) for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using this object). Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. Suppose this object is assigned a non-default value. Then, at the start of each test run, SROS reads TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the destination MAC address to use for the test run. The following index values are used for the read: tmnxOamEthCfmPingCtlSrcMdIndex, tmnxOamEthCfmPingCtlSrcMaIndex, tmnxOamEthCfmPingCtlSrcMepId, tmnxOamEthCfmPingCtlRemoteMepId. If a destination MAC address is not found, no test frames will be sent for the test run. The number of frames to be sent during a test run is configured using tmnxOamPingCtlProbeCount. Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the hardware hosting the test's far end is replaced (meaning a new destination MAC address is present), the test does not need to be reconfigured.

Sources for this description

Nokia networking MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 2

The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote Maintenance association End Point Identifier (MEP ID) for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using this object). Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. Suppose this object is assigned a non-default value. Then, at the start of each test run, SROS reads TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the destination MAC address to use for the test run. The following index values are used for the read: tmnxOamEthCfmPingCtlSrcMdIndex, tmnxOamEthCfmPingCtlSrcMaIndex, tmnxOamEthCfmPingCtlSrcMdName, tmnxOamEthCfmPingCtlSrcMaName, tmnxOamEthCfmPingCtlSrcMepId, tmnxOamEthCfmPingCtlRemoteMepId. If a destination MAC address is not found, no test frames will be sent for the test run. The number of frames to be sent during a test run is configured using tmnxOamPingCtlProbeCount. Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the hardware hosting the test's far end is replaced (meaning a new destination MAC address is present), the test does not need to be reconfigured.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Nokia networking MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; representative source files are shown for each definition.

Records for description 1Nokia networking MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

tmnxOamEthCfmPingCtlRemoteMepId · currentNokia networking MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: tmnxOamEthCfmPingCtlRemoteMepId

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "tmnxOamEthCfmPingCtlRemoteMepId",
    "OBJECT-TYPE",
    "SYNTAX",
    "Dot1agCfmMepIdOrZero",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote Maintenance association End Point Identifier (MEP ID) for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using this object). Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. Suppose this object is assigned a non-default value. Then, at the start of each test run, SROS reads TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the destination MAC address to use for the test run. The following index values are used for the read: tmnxOamEthCfmPingCtlSrcMdIndex, tmnxOamEthCfmPingCtlSrcMaIndex, tmnxOamEthCfmPingCtlSrcMepId, tmnxOamEthCfmPingCtlRemoteMepId. If a destination MAC address is not found, no test frames will be sent for the test run. The number of frames to be sent during a test run is configured using tmnxOamPingCtlProbeCount. Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the hardware hosting the test's far end is replaced (meaning a new destination MAC address is present), the test does not need to be reconfigured.\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "tmnxOamEthCfmPingCtlEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "Dot1agCfmMepIdOrZero"
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote Maintenance association End Point Identifier (MEP ID) for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using this object). Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. Suppose this object is assigned a non-default value. Then, at the start of each test run, SROS reads TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the destination MAC address to use for the test run. The following index values are used for the read: tmnxOamEthCfmPingCtlSrcMdIndex, tmnxOamEthCfmPingCtlSrcMaIndex, tmnxOamEthCfmPingCtlSrcMepId, tmnxOamEthCfmPingCtlRemoteMepId. If a destination MAC address is not found, no test frames will be sent for the test run. The number of frames to be sent during a test run is configured using tmnxOamPingCtlProbeCount. Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the hardware hosting the test's far end is replaced (meaning a new destination MAC address is present), the test does not need to be reconfigured."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}
  • Nokia networking MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

    Vendor MIB copy from the Observium Community archive. Nokia support.

    Module: TIMETRA-OAM-TEST-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['RouterID'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString', 'MacAddress', 'RowStatus', 'StorageType', 'TEXTUAL-CONVENTION', 'TimeStamp', 'TruthValue'], 'ATM-TC-MIB': ['AtmVcIdentifier', 'AtmVpIdentifier'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'IpAddress', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'MPLS-LDP-MIB': ['MplsLabel'], 'TIMETRA-TC-MIB': ['Dot1PPriority', 'IpAddressPrefixLength', 'SdpBindId', 'TDSCPName', 'TDSCPNameOrEmpty', 'TFCName', 'TItemDescription', 'TLNamedItem', 'TLNamedItemOrEmpty', 'TNamedItem', 'TNamedItemOrEmpty', 'TPolicyStatementNameOrEmpty', 'TProfile', 'TmnxActionType', 'TmnxAdminState', 'TmnxBfdOnLspSessFecType', 'TmnxBgpRouteTarget', 'TmnxEnabledDisabled', 'TmnxEnabledDisabledAdminState', 'TmnxEncapVal', 'TmnxHigh32', 'TmnxIgpInstance', 'TmnxLow32', 'TmnxMplsTpGlobalID', 'TmnxMplsTpNodeID', 'TmnxPortID', 'TmnxPwGlobalIdOrZero', 'TmnxServId', 'TmnxSpokeSdpIdOrZero', 'TmnxStrSapId', 'TmnxTunnelID', 'TmnxTunnelType', 'TmnxVPNRouteDistinguisher', 'TmnxVRtrID', 'TmnxVRtrIDOrZero', 'TmnxVcId', 'TmnxVcIdOrNone'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepIdOrZero'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressPrefixLength', 'InetAddressType', 'InetPortNumber'], 'TIMETRA-SERV-MIB': ['SdpBindVcType', 'SdpId'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-TC-MG-MIB': ['TmnxMobGwId'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs']}
    · Download TIMETRA-OAM-TEST-MIB
Records for description 2Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Nokia networking MIB copies (LibreNMS/Observium Community)1 record · 2 sources

Description 2

tmnxOamEthCfmPingCtlRemoteMepId · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Nokia networking MIB copies (LibreNMS/Observium Community)2 sources

Status in source: current.

Names: tmnxOamEthCfmPingCtlRemoteMepId

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "tmnxOamEthCfmPingCtlRemoteMepId",
    "OBJECT-TYPE",
    "SYNTAX",
    "Dot1agCfmMepIdOrZero",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote Maintenance association End Point Identifier (MEP ID) for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using this object). Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. Suppose this object is assigned a non-default value. Then, at the start of each test run, SROS reads TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the destination MAC address to use for the test run. The following index values are used for the read: tmnxOamEthCfmPingCtlSrcMdIndex, tmnxOamEthCfmPingCtlSrcMaIndex, tmnxOamEthCfmPingCtlSrcMdName, tmnxOamEthCfmPingCtlSrcMaName, tmnxOamEthCfmPingCtlSrcMepId, tmnxOamEthCfmPingCtlRemoteMepId. If a destination MAC address is not found, no test frames will be sent for the test run. The number of frames to be sent during a test run is configured using tmnxOamPingCtlProbeCount. Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the hardware hosting the test's far end is replaced (meaning a new destination MAC address is present), the test does not need to be reconfigured.\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "tmnxOamEthCfmPingCtlEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "Dot1agCfmMepIdOrZero"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote Maintenance association End Point Identifier (MEP ID) for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using this object). Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. Suppose this object is assigned a non-default value. Then, at the start of each test run, SROS reads TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the destination MAC address to use for the test run. The following index values are used for the read: tmnxOamEthCfmPingCtlSrcMdIndex, tmnxOamEthCfmPingCtlSrcMaIndex, tmnxOamEthCfmPingCtlSrcMdName, tmnxOamEthCfmPingCtlSrcMaName, tmnxOamEthCfmPingCtlSrcMepId, tmnxOamEthCfmPingCtlRemoteMepId. If a destination MAC address is not found, no test frames will be sent for the test run. The number of frames to be sent during a test run is configured using tmnxOamPingCtlProbeCount. Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the hardware hosting the test's far end is replaced (meaning a new destination MAC address is present), the test does not need to be reconfigured."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}
  • Nokia networking MIB copies (LibreNMS/Observium Community) · Publisher's source file: TIMETRA-OAM-TEST-MIB

    Vendor MIB copy from the LibreNMS archive. Nokia support.

    Module: TIMETRA-OAM-TEST-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['RouterID'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString', 'MacAddress', 'RowStatus', 'StorageType', 'TEXTUAL-CONVENTION', 'TimeStamp', 'TruthValue'], 'ATM-TC-MIB': ['AtmVcIdentifier', 'AtmVpIdentifier'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Gauge32', 'Integer32', 'IpAddress', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'MPLS-LDP-MIB': ['MplsLabel'], 'TIMETRA-TC-MIB': ['Dot1PPriority', 'IpAddressPrefixLength', 'SdpBindId', 'ServiceOperStatus', 'TDSCPName', 'TDSCPNameOrEmpty', 'TFCName', 'TItemDescription', 'TLNamedItem', 'TLNamedItemOrEmpty', 'TNamedItem', 'TNamedItemOrEmpty', 'TPolicyStatementNameOrEmpty', 'TProfile', 'TmnxActionType', 'TmnxAdminState', 'TmnxBfdOnLspSessFecType', 'TmnxBgpRouteTarget', 'TmnxEnabledDisabled', 'TmnxEnabledDisabledAdminState', 'TmnxEncapVal', 'TmnxHigh32', 'TmnxIgpInstance', 'TmnxLow32', 'TmnxMplsTpGlobalID', 'TmnxMplsTpNodeID', 'TmnxPortID', 'TmnxPwGlobalIdOrZero', 'TmnxServId', 'TmnxSpokeSdpIdOrZero', 'TmnxStrSapId', 'TmnxTunnelID', 'TmnxTunnelType', 'TmnxVPNRouteDistinguisher', 'TmnxVRtrID', 'TmnxVRtrIDOrZero', 'TmnxVcId', 'TmnxVcIdOrNone'], 'TIMETRA-LAG-MIB': ['tLagIndex'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepIdOrZero'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressPrefixLength', 'InetAddressType', 'InetPortNumber'], 'TIMETRA-PORT-MIB': ['tmnxPortPortID'], 'TIMETRA-SERV-MIB': ['SdpBindVcType', 'SdpId'], 'TIMETRA-VRTR-MIB': ['vRtrID', 'vRtrIfIndex'], 'TIMETRA-TC-MG-MIB': ['TmnxMobGwId'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs']}
    · Download TIMETRA-OAM-TEST-MIB

    Related source files and packages:

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.6527)

Marcelo Mourier

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.6527)

Jason Sterne

Siblings (6)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.6527.3.1.2.11.1.23.1.1 tmnxOamEthCfmPingCtlTgtMacAddr00
1.3.6.1.4.1.6527.3.1.2.11.1.23.1.2 tmnxOamEthCfmPingCtlSrcMdIndex00
1.3.6.1.4.1.6527.3.1.2.11.1.23.1.3 tmnxOamEthCfmPingCtlSrcMaIndex00
1.3.6.1.4.1.6527.3.1.2.11.1.23.1.4 tmnxOamEthCfmPingCtlSrcMepId00
1.3.6.1.4.1.6527.3.1.2.11.1.23.1.6 tmnxOamEthCfmPingCtlSrcMdName00
1.3.6.1.4.1.6527.3.1.2.11.1.23.1.7 tmnxOamEthCfmPingCtlSrcMaName00