tAtmTdpShaping determines whether egress shaping should occur.
The default tAtmTdpShaping is determined by the Service Category.
The following default applies for tAtmTdpShaping
depending upon a given service category:
Applicable Service Category Default Shaping Value
UBR disabled
CBR enabled
RT-VBR enabled
NRT-VBR enabled
For a Service Category of UBR, tAtmTdpShaping cannot be enabled.
For CBR and RT-VBR service cateories disabling shaping is
MDA-dependent.
Shaping is only applied in the egress direction.
Parsed from file TIMETRA-QOS-MIB.mib
Module: TIMETRA-QOS-MIB
tAtmTdpShaping OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled For a Service Category of UBR, tAtmTdpShaping cannot be enabled. For CBR and RT-VBR service cateories disabling shaping is MDA-dependent. Shaping is only applied in the egress direction." ::= { tAtmTdpEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1 | tAtmTdpIndex | 0 | 0 | This object is used to identify an entity inside the tAtmTdpTable. When creating a new row in the table the value of this index ma… |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2 | tAtmTdpSir | 0 | 0 | tAtmTdpSir identifies the sustained information rate in kilobits per second. The default Sir is determined by the Service Categor… |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3 | tAtmTdpPir | 0 | 0 | tAtmTdpPir identifies the peak information rate in kilobits per second. The default Pir is determined by the Service Category. The… |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4 | tAtmTdpMbs | 0 | 0 | tAtmTdpMbs identifies the maximum burst size in cells. The default Mbs is determined by the Service Category. The following defaul… |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5 | tAtmTdpMir | 0 | 0 | tAtmTdpMir identifies the Minimum Information Rate in kilobits per second. The default Mir is determined by the Service Category.… |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7 | tAtmTdpServCat | 0 | 0 | tAtmTdpServCat determines the ATM service category. |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8 | tAtmTdpDescription | 0 | 0 | The value of tAtmTdpDescription specifies an ASCII string used to describe the ATM traffic descriptor. |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9 | tAtmTdpLastChanged | 0 | 0 | tAtmTdpLastChanged maintains the timestamp of the last change made to a row in the Traffic Descriptor Profile Table. |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10 | tAtmTdpRowStatus | 0 | 0 | tAtmTdpRowStatus is used to create/modify/delete a new row in this table. Only createAndGo/Active/Destroy are supported |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11 | tAtmTdpDescrType | 0 | 0 | tAtmTdpDescrType identifies the types of ATM traffic descriptor. The default is determined by the value of tAtmTdpServCat. The fo… |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12 | tAtmTdpCdvt | 0 | 0 | tAtmTdpCdvt identifies the Cell Delay Variation Tolerance in microseconds. The following default applies for Cdvt that is modifia… |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13 | tAtmTdpPolicing | 0 | 0 | tAtmTdpPolicing determines whether ingress traffic is policed. Policing by default is disabled. Policing is valid for CBR, UBR RT… |
| 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14 | tAtmTdpCLPTagging | 0 | 0 | tAtmTdpCLPTagging controls the setting of the CLP bit in the ATM cell header for egress traffic on an IES or VPRN SAP. If disabl… |