The value of tSyncIfTimingAdmRefOrder1 specifies the most preferred
timing reference source.
The synchronous equipment timing subsystem can lock to three
different timing reference inputs, reference1, reference2 and bits.
The subsystem chooses a reference based on priority.
tSyncIfTimingAdmRefOrder1 is used to configure the most preferred
timing reference.
Parsed from file TIMETRA-CHASSIS-MIB.mib
Module: TIMETRA-CHASSIS-MIB
tSyncIfTimingAdmRefOrder1 OBJECT-TYPE SYNTAX TmnxSETSRefSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tSyncIfTimingAdmRefOrder1 specifies the most preferred timing reference source. The synchronous equipment timing subsystem can lock to three different timing reference inputs, reference1, reference2 and bits. The subsystem chooses a reference based on priority. tSyncIfTimingAdmRefOrder1 is used to configure the most preferred timing reference." DEFVAL { bits } ::= { tSyncIfTimingAdmEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.1 | tSyncIfTimingAdmRevert | 0 | 0 | The value of tSyncIfTimingAdmRevert specifies whether the reference source will revert to a higher priority source that has been… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.3 | tSyncIfTimingAdmRefOrder2 | 0 | 0 | The value of tSyncIfTimingAdmRefOrder2 specifies the second most preferred timing reference for the synchronous equipment timing… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.4 | tSyncIfTimingAdmRef1SrcPort | 0 | 0 | The value of tSyncIfTimingAdmRef1SrcPort specifies the source port of the first timing reference. This can only be set to a valid… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.5 | tSyncIfTimingAdmRef1AdminStatus | 0 | 0 | The value of tSyncIfTimingAdmRef1AdminStatus specifies the desired administrative status of the first timing reference. |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.6 | tSyncIfTimingAdmRef2SrcPort | 0 | 0 | The value of tSyncIfTimingAdmRef2SrcPort specifies the source port of the second timing reference. This can only be set to a vali… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.7 | tSyncIfTimingAdmRef2AdminStatus | 0 | 0 | The value of tSyncIfTimingAdmRef2AdminStatus specifies the desired administrative status of the second timing reference. |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.8 | tSyncIfTimingAdmChanged | 0 | 0 | The value of tSyncIfTimingAdmChanged is a bitmask that indicates which objects have been set, but not committed. bit values use… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.9 | tSyncIfTimingAdmRefOrder3 | 0 | 0 | The value of tSyncIfTimingAdmRefOrder3 indicates the third most preferred timing reference for the synchronous equipment timing s… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.10 | tSyncIfTimingAdmBITSIfType | 0 | 0 | The value of tSyncIfTimingAdmBITSIfType specifies the interface type of the BITS (Building Integrated Timing Supply) timing refe… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.11 | tSyncIfTimingAdmBITSAdminStatus | 0 | 0 | The value of tSyncIfTimingAdmBITSAdminStatus specifies the desired administrative status of the BITS (Building Integrated Timing… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.12 | tSyncIfTimingAdmRef1SrcHw | 0 | 0 | The value of tSyncIfTimingAdmRef1SrcHw specifies the source HW Index of the first timing reference if the source is not a port. T… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.13 | tSyncIfTimingAdmRef1BITSIfType | 0 | 0 | The value of tSyncIfTimingAdmRef1BITSIfType specifies the interface type of the first timing reference if the source is BITS. |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.14 | tSyncIfTimingAdmRef2SrcHw | 0 | 0 | The value of tSyncIfTimingAdmRef2SrcHw specifies the source HW Index of the second timing reference if the source is not a port.… |
| 1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.15 | tSyncIfTimingAdmRef2BITSIfType | 0 | 0 | The value of tSyncIfTimingAdmRef2BITSIfType specifies the interface type of the second timing reference if the source is BITS. |