OID reference
1.3.6.1.4.1.6527.3.1.2.27.9.3
The value of tAtmSysOamRetryDown specifies the number of consecutive OAM loopback attempts that must fail after the periodic attempt before the endpoint will transition from the up state to eteAisLoc. A value of 0 means that the endpoint will transition to the eteAisLoc state immediately if the periodic loopback attem…
Identification
{1 3 6 1 4 1 6527 3 1 2 27 9 3}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.27.9.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tAtmSysOamRetryDown OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tAtmSysOamRetryDown specifies the number of consecutive
OAM loopback attempts that must fail after the periodic attempt
before the endpoint will transition from the up state to eteAisLoc.
A value of 0 means that the endpoint will transition to the eteAisLoc
state immediately if the periodic loopback attempt fails."
DEFVAL { 4 }
::= { tAtmSystemObjs 3 }tAtmSysOamRetryDown OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tAtmSysOamRetryDown specifies the number of consecutive
OAM loopback attempts that must fail after the periodic attempt before
the endpoint will transition from the up state to eteAisLoc. A value
of 0 means that the endpoint will transition to the eteAisLoc state
immediately if the periodic loopback attempt fails."
DEFVAL { 4 }
::= { tAtmSystemObjs 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The value of tAtmSysOamRetryDown specifies the number of consecutive OAM loopback attempts that must fail after the periodic attempt before the endpoint will transition from the up state to eteAisLoc. A value of 0 means that the endpoint will transition to the eteAisLoc state immediately if the periodic loopback attempt fails.
Netdisco MIB archive copiesNokia networking MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tAtmSysOamRetryDown
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tAtmSysOamRetryDown",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"10",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tAtmSysOamRetryDown specifies the number of consecutive OAM loopback attempts that must fail after the periodic attempt before the endpoint will transition from the up state to eteAisLoc. A value of 0 means that the endpoint will transition to the eteAisLoc state immediately if the periodic loopback attempt fails.\"",
"DEFVAL",
"{",
"4",
"}",
"::=",
"{",
"tAtmSystemObjs",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
10
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tAtmSysOamRetryDown specifies the number of consecutive OAM loopback attempts that must fail after the periodic attempt before the endpoint will transition from the up state to eteAisLoc. A value of 0 means that the endpoint will transition to the eteAisLoc state immediately if the periodic loopback attempt fails."
],
null,
null,
null,
[
"DEFVAL",
4
]
]
}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-ATM-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'ATM-MIB': ['atmInterfaceConfEntry', 'atmVclEntry', 'atmVclVpi', 'atmVclVci', 'aal5VccEntry', 'atmVplEntry', 'atmVplVpi', 'atmInterfaceTCAlarmState', 'atmInterfaceDs3PlcpAlarmState', 'atmInterfaceCurrentMaxVpiBits', 'atmInterfaceCurrentMaxVciBits', 'atmInterfaceMaxActiveVpiBits', 'atmInterfaceMaxActiveVciBits', 'atmInterfaceConfVccs', 'atmInterfaceConfVpcs', 'atmInterfaceTCEntry'], 'SNMPv2-TC': ['RowStatus', 'TimeStamp', 'TEXTUAL-CONVENTION'], 'ATM-TC-MIB': ['AtmVpIdentifier', 'AtmVcIdentifier', 'AtmConnKind', 'AtmConnCastType', 'AtmTrafficDescrParamIndex', 'AtmVorXAdminStatus', 'AtmVorXOperStatus', 'AtmVorXLastChange'], 'SNMPv2-SMI': ['Integer32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRNotifyPrefix', 'tmnxSRConfs'], 'TIMETRA-CHASSIS-MIB': ['tmnxChassisIndex', 'tmnxCardSlotNum', 'tmnxMDASlotNum'], 'TIMETRA-CONN-PROF-MIB': ['tmnxConnProfId']}Related source files and packages:
Status in source: current.
Names: tAtmSysOamRetryDown
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tAtmSysOamRetryDown",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"10",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tAtmSysOamRetryDown specifies the number of consecutive OAM loopback attempts that must fail after the periodic attempt before the endpoint will transition from the up state to eteAisLoc. A value of 0 means that the endpoint will transition to the eteAisLoc state immediately if the periodic loopback attempt fails.\"",
"DEFVAL",
"{",
"4",
"}",
"::=",
"{",
"tAtmSystemObjs",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
10
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tAtmSysOamRetryDown specifies the number of consecutive OAM loopback attempts that must fail after the periodic attempt before the endpoint will transition from the up state to eteAisLoc. A value of 0 means that the endpoint will transition to the eteAisLoc state immediately if the periodic loopback attempt fails."
],
null,
null,
null,
[
"DEFVAL",
4
]
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-ATM-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'ATM-MIB': ['aal5VccEntry', 'atmInterfaceConfEntry', 'atmInterfaceConfVccs', 'atmInterfaceConfVpcs', 'atmInterfaceCurrentMaxVciBits', 'atmInterfaceCurrentMaxVpiBits', 'atmInterfaceDs3PlcpAlarmState', 'atmInterfaceMaxActiveVciBits', 'atmInterfaceMaxActiveVpiBits', 'atmInterfaceTCAlarmState', 'atmInterfaceTCEntry', 'atmVclEntry', 'atmVclVci', 'atmVclVpi', 'atmVplEntry', 'atmVplVpi'], 'SNMPv2-TC': ['RowStatus', 'TEXTUAL-CONVENTION', 'TimeStamp'], 'ATM-TC-MIB': ['AtmConnCastType', 'AtmConnKind', 'AtmTrafficDescrParamIndex', 'AtmVcIdentifier', 'AtmVorXAdminStatus', 'AtmVorXLastChange', 'AtmVorXOperStatus', 'AtmVpIdentifier'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Integer32', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs'], 'TIMETRA-CHASSIS-MIB': ['tmnxCardSlotNum', 'tmnxChassisIndex', 'tmnxMDASlotNum'], 'TIMETRA-CONN-PROF-MIB': ['tmnxConnProfId']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.27.9.1 | tAtmSysLlid | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.27.9.2 | tAtmSysOamRetryUp | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.27.9.4 | tAtmSysOamLoopbackPeriod | 0 | 0 |