OID reference
1.3.6.1.4.1.6527.3.1.2.27.9.4
The value of tAtmSysOamLoopbackPeriod specifies the number of seconds between periodic loopback attempts on an ATM endpoint that has periodic loopback enabled.
Identification
{1 3 6 1 4 1 6527 3 1 2 27 9 4}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.6527.3.1.2.27.9.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
tAtmSysOamLoopbackPeriod OBJECT-TYPE
SYNTAX INTEGER (1..40)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tAtmSysOamLoopbackPeriod specifies the number of
seconds between periodic loopback attempts on an ATM endpoint
that has periodic loopback enabled."
DEFVAL { 10 }
::= { tAtmSystemObjs 4 }tAtmSysOamLoopbackPeriod OBJECT-TYPE
SYNTAX Integer32 (1..40)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tAtmSysOamLoopbackPeriod specifies the number of seconds
between periodic loopback attempts on an ATM endpoint that has
periodic loopback enabled."
DEFVAL { 10 }
::= { tAtmSystemObjs 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The value of tAtmSysOamLoopbackPeriod specifies the number of seconds between periodic loopback attempts on an ATM endpoint that has periodic loopback enabled.
Netdisco MIB archive copiesNokia networking MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: tAtmSysOamLoopbackPeriod
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tAtmSysOamLoopbackPeriod",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"40",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tAtmSysOamLoopbackPeriod specifies the number of seconds between periodic loopback attempts on an ATM endpoint that has periodic loopback enabled.\"",
"DEFVAL",
"{",
"10",
"}",
"::=",
"{",
"tAtmSystemObjs",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
40
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tAtmSysOamLoopbackPeriod specifies the number of seconds between periodic loopback attempts on an ATM endpoint that has periodic loopback enabled."
],
null,
null,
null,
[
"DEFVAL",
10
]
]
}Vendor MIB copy from the Netdisco archive.
Module: TIMETRA-ATM-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'ATM-MIB': ['atmInterfaceConfEntry', 'atmVclEntry', 'atmVclVpi', 'atmVclVci', 'aal5VccEntry', 'atmVplEntry', 'atmVplVpi', 'atmInterfaceTCAlarmState', 'atmInterfaceDs3PlcpAlarmState', 'atmInterfaceCurrentMaxVpiBits', 'atmInterfaceCurrentMaxVciBits', 'atmInterfaceMaxActiveVpiBits', 'atmInterfaceMaxActiveVciBits', 'atmInterfaceConfVccs', 'atmInterfaceConfVpcs', 'atmInterfaceTCEntry'], 'SNMPv2-TC': ['RowStatus', 'TimeStamp', 'TEXTUAL-CONVENTION'], 'ATM-TC-MIB': ['AtmVpIdentifier', 'AtmVcIdentifier', 'AtmConnKind', 'AtmConnCastType', 'AtmTrafficDescrParamIndex', 'AtmVorXAdminStatus', 'AtmVorXOperStatus', 'AtmVorXLastChange'], 'SNMPv2-SMI': ['Integer32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRObjs', 'tmnxSRNotifyPrefix', 'tmnxSRConfs'], 'TIMETRA-CHASSIS-MIB': ['tmnxChassisIndex', 'tmnxCardSlotNum', 'tmnxMDASlotNum'], 'TIMETRA-CONN-PROF-MIB': ['tmnxConnProfId']}Related source files and packages:
Status in source: current.
Names: tAtmSysOamLoopbackPeriod
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tAtmSysOamLoopbackPeriod",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"40",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of tAtmSysOamLoopbackPeriod specifies the number of seconds between periodic loopback attempts on an ATM endpoint that has periodic loopback enabled.\"",
"DEFVAL",
"{",
"10",
"}",
"::=",
"{",
"tAtmSystemObjs",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
40
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of tAtmSysOamLoopbackPeriod specifies the number of seconds between periodic loopback attempts on an ATM endpoint that has periodic loopback enabled."
],
null,
null,
null,
[
"DEFVAL",
10
]
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: TIMETRA-ATM-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'ATM-MIB': ['aal5VccEntry', 'atmInterfaceConfEntry', 'atmInterfaceConfVccs', 'atmInterfaceConfVpcs', 'atmInterfaceCurrentMaxVciBits', 'atmInterfaceCurrentMaxVpiBits', 'atmInterfaceDs3PlcpAlarmState', 'atmInterfaceMaxActiveVciBits', 'atmInterfaceMaxActiveVpiBits', 'atmInterfaceTCAlarmState', 'atmInterfaceTCEntry', 'atmVclEntry', 'atmVclVci', 'atmVclVpi', 'atmVplEntry', 'atmVplVpi'], 'SNMPv2-TC': ['RowStatus', 'TEXTUAL-CONVENTION', 'TimeStamp'], 'ATM-TC-MIB': ['AtmConnCastType', 'AtmConnKind', 'AtmTrafficDescrParamIndex', 'AtmVcIdentifier', 'AtmVorXAdminStatus', 'AtmVorXLastChange', 'AtmVorXOperStatus', 'AtmVpIdentifier'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'Integer32', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'TIMETRA-GLOBAL-MIB': ['timetraSRMIBModules', 'tmnxSRConfs', 'tmnxSRNotifyPrefix', 'tmnxSRObjs'], 'TIMETRA-CHASSIS-MIB': ['tmnxCardSlotNum', 'tmnxChassisIndex', 'tmnxMDASlotNum'], 'TIMETRA-CONN-PROF-MIB': ['tmnxConnProfId']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.27.9.1 | tAtmSysLlid | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.27.9.2 | tAtmSysOamRetryUp | 0 | 0 | |
| 1.3.6.1.4.1.6527.3.1.2.27.9.3 | tAtmSysOamRetryDown | 0 | 0 |