vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server
where the requests will be forwarded.
Parsed from file TIMETRA-VRTR-MIB.mib
Module: TIMETRA-VRTR-MIB
vRtrIfDHCPRelayServer5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.3.19.1.1 | vRtrIfDHCPRelayInfoOption | 0 | 0 | vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If the value of this object is set to 'false', DHCP Relay is … |
1.3.6.1.4.1.6527.3.1.2.3.19.1.2 | vRtrIfDHCPRelayInfoAction | 0 | 0 | vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay reforwarding policy. replace(1) - replace existing information with… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.3 | vRtrIfDHCPRelayCircuitId | 0 | 0 | The value of the object vRtrIfDHCPRelayCircuitId specifies whether or not the circuit-id suboption is present, and if it is pres… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.4 | vRtrIfDHCPRelayRemoteId | 0 | 0 | The value of vRtrIfDHCPRelayRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If … |
1.3.6.1.4.1.6527.3.1.2.3.19.1.5 | vRtrIfDHCPAutoFilter | 0 | 0 | vRtrIfDHCPAutoFilter allows the router to automatically build anti-spoofing filter lists. When this object is set to a non-zero v… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.6 | vRtrIfDHCPRelayServer1 | 0 | 0 | vRtrIfDHCPRelayServer1 is used to configure the first DHCP server where the requests will be forwarded. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.7 | vRtrIfDHCPRelayServer2 | 0 | 0 | vRtrIfDHCPRelayServer2 is used to configure the second DHCP server where the requests will be forwarded. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.8 | vRtrIfDHCPRelayServer3 | 0 | 0 | vRtrIfDHCPRelayServer3 is used to configure the third DHCP server where the requests will be forwarded. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.9 | vRtrIfDHCPRelayServer4 | 0 | 0 | vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server where the requests will be forwarded. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.11 | vRtrIfDHCPRelayServer6 | 0 | 0 | vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server where the requests will be forwarded. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.12 | vRtrIfDHCPRelayServer7 | 0 | 0 | vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server where the requests will be forwarded. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.13 | vRtrIfDHCPRelayServer8 | 0 | 0 | vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server where the requests will be forwarded. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.14 | vRtrIfDHCPRelayTrusted | 0 | 0 | When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the router will relay requests where the DHCP giaddr is zero. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.15 | vRtrIfDHCPAdminState | 0 | 0 | vRtrIfDHCPAdminState is used to configure the desired administrative state of DHCP on this interface. If the value of vRtrIfType … |
1.3.6.1.4.1.6527.3.1.2.3.19.1.16 | vRtrIfDHCPSnooping | 0 | 0 | vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets received on interface. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.17 | vRtrIfDHCPDescription | 0 | 0 | The value of vRtrIfDHCPDescription is a user provided description string for DHCP on this virtual router interface. It can cons… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.18 | vRtrIfDHCPAutoFilterId | 0 | 0 | vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used for this interface. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.19 | vRtrIfDHCPOperAutoFilter | 0 | 0 | The value of vRtrIfDHCPOperAutoFilter indicates the number of active auto-filter entries per interface. These entries are create… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.20 | vRtrIfDHCPAuthPolicy | 0 | 0 | Defines which subscriber authentication policy must be applied when a subscriber message (e.g. DHCP, PPPoE, ...) is received on … |
1.3.6.1.4.1.6527.3.1.2.3.19.1.21 | vRtrIfDHCPLeasePopulate | 0 | 0 | The value of the object vRtrIfDHCPLeasePopulate specifies the maximum number of DHCP lease states allowed on this interface. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.22 | vRtrIfDHCPOperLeasePopulate | 0 | 0 | The value of the object vRtrIfDHCPOperLeasePopulate indicates the maximum number of DHCP lease states allocated on this interfac… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.23 | vRtrIfDHCPGiAddressType | 0 | 0 | The value of vRtrIfDHCPGiAddressType specifies the type of vRtrIfDHCPGiAddress, the gateway interface address. |
1.3.6.1.4.1.6527.3.1.2.3.19.1.24 | vRtrIfDHCPGiAddress | 0 | 0 | The value of vRtrIfDHCPGiAddress specifies the gateway interface address. The type of this address is specified by the value of v… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.25 | vRtrIfDHCPGiAddressAsSrc | 0 | 0 | The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay should use the gateway interface address as the source IP… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.26 | vRtrIfDHCPMatchOption82 | 0 | 0 | The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay should use the circuit ID in the option 82 field in DHCP pa… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.27 | vRtrIfDHCPRelayRemoteIdStr | 0 | 0 | The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is … |
1.3.6.1.4.1.6527.3.1.2.3.19.1.28 | vRtrIfDHCPProxyAdminState | 0 | 0 | The value of vRtrIfDHCPProxyAdminState specifies the desired administrative state of the proxy server on this interface. When it … |
1.3.6.1.4.1.6527.3.1.2.3.19.1.29 | vRtrIfDHCPProxyServerAddr | 0 | 0 | The value of vRtrIfDHCPProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP se… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.30 | vRtrIfDHCPProxyLeaseTime | 0 | 0 | The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.31 | vRtrIfDHCPProxyLTRadiusOverride | 0 | 0 | The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented … |
1.3.6.1.4.1.6527.3.1.2.3.19.1.32 | vRtrIfDHCPVendorIncludeOptions | 0 | 0 | The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded in the Alcatel vendor specific sub-option of option 82. The… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.33 | vRtrIfDHCPVendorOptionString | 0 | 0 | The value of vRtrIfDHCPVendorOptionString specifies the string that goes into the Alcatel vendor specific sub-option of option 8… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.34 | vRtrIfDHCPLayer2Header | 0 | 0 | The value of vRtrIfDHCPLayer2Header specificies, together with the value of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address th… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.35 | vRtrIfDHCPAntiSpoofMacAddr | 0 | 0 | The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the value of object vRtrIfDHCPLayer2Header, the MAC address that… |
1.3.6.1.4.1.6527.3.1.2.3.19.1.36 | vRtrIfDHCPClientApplications | 0 | 0 | The value of vRtrIfDHCPClientApplications specifies the set of client applications that can make use of the DHCP relay functiona… |