The value of msapTlsPlcyDhcpCircuitId specifies whether or not the
circuit-id suboption is present, and if it is present what
information goes in it:
none - the circuit-id suboption will not be part of
the information option (Option 82).
asciiTuple - the ASCII-encoded concatenated tuple consisting
of the
- access-node-identifier
- service-id
- interface-name
is used.
vlanAsciiTuple - the format will include VLAN-id and dot1p bits
in addition to what is included in ascii-tuple
already. The format is supported on dot1q and
qinq encapsulated ports only. Thus, when the
option 82 bits are stripped, dot1p bits will be
copied to the Ethernet header of an outgoing
packet.
Parsed from file TIMETRA-SAP-MIB.mib
Module: TIMETRA-SAP-MIB
msapTlsPlcyDhcpCircuitId OBJECT-TYPE SYNTAX INTEGER { none (0), asciiTuple (1), vlanAsciiTuple (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of msapTlsPlcyDhcpCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it: none - the circuit-id suboption will not be part of the information option (Option 82). asciiTuple - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name is used. vlanAsciiTuple - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet." DEFVAL { asciiTuple } ::= { msapTlsPlcyEntry 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.1 | msapTlsPlcyLastChanged | 0 | 0 | The value of msapTlsPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes wer… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.2 | msapTlsPlcySplitHorizonGrp | 0 | 0 | The value of msapTlsPlcySplitHorizonGrp specifies the name of the split-horizon group for the MSAP. If the name specified does no… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.3 | msapTlsPlcyArpReplyAgent | 0 | 0 | The value of msapTlsPlcyArpReplyAgent specifies the status of the special ARP response mechanism in the system for ARP requests … |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.4 | msapTlsPlcySubMgmtMacDaHashing | 0 | 0 | The value of msapTlsPlcySubMgmtMacDaHashing specifies whether subscriber traffic egressing a LAG MSAP has its egress LAG link sel… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.5 | msapTlsPlcyDhcpLeasePopulate | 0 | 0 | The value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number of DHCP lease states allowed on the MSAP. |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.6 | msapTlsPlcyDhcpPrxyAdminState | 0 | 0 | The value of msapTlsPlcyDhcpPrxyAdminState specifies the desired administrative state of the proxy server on the interface. |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.7 | msapTlsPlcyDhcpPrxyServAddrType | 0 | 0 | The value of msapTlsPlcyDhcpPrxyServAddrType specifies the address type of msapTlsPlcyDhcpPrxyServAddr. |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.8 | msapTlsPlcyDhcpPrxyServAddr | 0 | 0 | The value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of the which will be used as the source address of the emulate… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.9 | msapTlsPlcyDhcpPrxyLeaseTime | 0 | 0 | The value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how long a DHCP client is allowed to use the offered IP address… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.10 | msapTlsPlcyDhcpPrxyLTRadOverride | 0 | 0 | The value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not the lease time provided by the RADIUS server is presented… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.11 | msapTlsPlcyDhcpInfoAction | 0 | 0 | The value of msapTlsPlcyDhcpInfoAction specifies the DHCP option reforwarding policy: 'replace' - replace existing information wi… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.13 | msapTlsPlcyDhcpRemoteId | 0 | 0 | The value of msapTlsPlcyDhcpRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If th… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.14 | msapTlsPlcyDhcpRemoteIdString | 0 | 0 | The value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id. The value of this object is ignored if msapTlsPlcyDhcpRemote… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.15 | msapTlsPlcyDhcpVendorInclOpts | 0 | 0 | The value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded in the Alcatel-Lucent vendor specific sub-option of option … |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.16 | msapTlsPlcyDhcpVendorOptStr | 0 | 0 | The value of msapTlsPlcyDhcpVendorOptStr specifies the string that goes into the Alcatel-Lucent vendor specific sub-option of op… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.17 | msapTlsPlcyEgressMcastGroup | 0 | 0 | The value of msapTlsPlcyEgressMcastGroup specifies the Egress Multicast Group for the MSAP. |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.18 | msapTlsPlcyIgmpSnpgImportPlcy | 0 | 0 | The value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy statement that is be applied to all incoming IGMP messages on th… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.19 | msapTlsPlcyIgmpSnpgFastLeave | 0 | 0 | The value of msapTlsPlcyIgmpSnpgFastLeave specifies whether fast leave is allowed on this MSAP. If set to 'enabled', the system … |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.20 | msapTlsPlcyIgmpSnpgSendQueries | 0 | 0 | The value of msapTlsPlcyIgmpSnpgSendQueries specifies whether the system generates General Queries by itself on the MSAP. |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.21 | msapTlsPlcyIgmpSnpgGenQueryIntv | 0 | 0 | The value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies the interval (in seconds) between two consecutive general queries sent by … |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.22 | msapTlsPlcyIgmpSnpgQueryRespIntv | 0 | 0 | The value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. Th… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.23 | msapTlsPlcyIgmpSnpgRobustCount | 0 | 0 | The value of msapTlsPlcyIgmpSnpgRobustCount specifies the robustness variable on the MSAP. This object allows tuning for the expe… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.24 | msapTlsPlcyIgmpSnpgLastMembIntvl | 0 | 0 | The value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and … |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.25 | msapTlsPlcyIgmpSnpgMaxNbrGrps | 0 | 0 | The value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group addresses are allowed for the MSAP. The value 0 means that no… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.26 | msapTlsPlcyIgmpSnpgMvrFromVplsId | 0 | 0 | The value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which VPLS the multicast streams corresponding to the groups learne… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.27 | msapTlsPlcyIgmpSnpgVersion | 0 | 0 | The value of msapTlsPlcyIgmpSnpgVersion specifies the version of IGMP running on the MSAP. |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.28 | msapTlsPlcyIgmpSnpgMcacPlcyName | 0 | 0 | The value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name of the multicast CAC (Connection Admission Control) policy. |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.29 | msapTlsPlcyIgmpSnpgMcacUncnstBW | 0 | 0 | The value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in ki… |
1.3.6.1.4.1.6527.3.1.2.4.3.45.1.30 | msapTlsPlcyIgmpSnpgMcacPrRsvMnBW | 0 | 0 | The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth pre-reserved for all the mandatory channels on a given int… |