Status in source: current.
Names: aluPortEtherIngressRateCbs
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aluPortEtherIngressRateCbs",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"1",
".",
".",
"130816",
")",
"UNITS",
[
"literal",
"22627974657322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"aluPortEtherIngressRateCbs specifies the committed burst size that hard policer can accept while complying to the ingress rate tmnxPortEtherIngressRate of the port. aluPortEtherIngressRateCbs is not applicable when tmnxPortEtherIngressRate is -1. Setting tmnxPortEtherIngressRate to -1 causes aluPortEtherIngressRateCbs of the port to revert back to its default value. aluPortEtherIngressRateCbs must be configured in multiples of 256 bytes.\"",
"DEFVAL",
"{",
"130816",
"}",
"::=",
"{",
"aluExtTmnxPortEtherEntry",
"17",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
1,
130816
]
]
]
],
[
"UNITS",
"bytes"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"aluPortEtherIngressRateCbs specifies the committed burst size that hard policer can accept while complying to the ingress rate tmnxPortEtherIngressRate of the port. aluPortEtherIngressRateCbs is not applicable when tmnxPortEtherIngressRate is -1. Setting tmnxPortEtherIngressRate to -1 causes aluPortEtherIngressRateCbs of the port to revert back to its default value. aluPortEtherIngressRateCbs must be configured in multiples of 256 bytes."
],
null,
null,
null,
[
"DEFVAL",
130816
]
]
}