OID reference
1.3.6.1.4.1.7244.2.1.2.1.5.4
agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled.
Identification
{1 3 6 1 4 1 7244 2 1 2 1 5 4}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | disable |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.7244.2.1.2.1.5.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
agentSerialHWFlowControlMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"agentSerialHardwareFlowControl specifies whether hardware
flow-control is enabled or disabled. Hardware Flow Control is
always disabled."
::= { agentSerialGroup 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentSerialHWFlowControlMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSerialHWFlowControlMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled.\"",
"::=",
"{",
"agentSerialGroup",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address', 'Ipv6AddressPrefix'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'QUANTA-SWITCH-MIB': ['switch', 'AgentPortMask']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7244.2.1.2.1.5.1 | agentSerialTimeout | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.2 | agentSerialBaudrate | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.3 | agentSerialCharacterSize | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.5 | agentSerialStopBits | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.6 | agentSerialParityType | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.7 | agentSerialTerminalLength | 0 | 0 |