agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.7244.2.1.2.1.5.6
agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None.
Identification
{1 3 6 1 4 1 7244 2 1 2 1 5 6}
| Value | Name |
|---|---|
| 1 | even |
| 2 | odd |
| 3 | none |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.7244.2.1.2.1.5.6.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
agentSerialParityType OBJECT-TYPE
SYNTAX INTEGER {
even(1),
odd(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" agentSerialParityType specifies the Parity Method used on
the Serial Port. The Parity Method is always None. "
::= { agentSerialGroup 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentSerialParityType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSerialParityType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"even",
"(",
"1",
")",
",",
"odd",
"(",
"2",
")",
",",
"none",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\" agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None. \"",
"::=",
"{",
"agentSerialGroup",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"even",
1
],
[
"odd",
2
],
[
"none",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address', 'Ipv6AddressPrefix'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'QUANTA-SWITCH-MIB': ['switch', 'AgentPortMask']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7244.2.1.2.1.5.1 | agentSerialTimeout | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.2 | agentSerialBaudrate | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.3 | agentSerialCharacterSize | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.4 | agentSerialHWFlowControlMode | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.5 | agentSerialStopBits | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.1.5.7 | agentSerialTerminalLength | 0 | 0 |