OID reference
1.3.6.1.4.1.7244.2.1.2.15.9.1.16
This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-edge mode for the port. disable(2) - disables the auto-edge mode for the port. The default auto-edge mode is enabled.
Identification
{1 3 6 1 4 1 7244 2 1 2 15 9 1 16}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | disable |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.7244.2.1.2.15.9.1.16
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
agentStpCstPortAutoEdge OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This command sets the auto-edge mode of the port which enables it
to become an edge port if it does not see BPDUs for some duration.
enable(1) - enables the auto-edge mode for the port.
disable(2) - disables the auto-edge mode for the port.
The default auto-edge mode is enabled."
::= { agentStpCstPortEntry 16 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-edge mode for the port. disable(2) - disables the auto-edge mode for the port. The default auto-edge mode is enabled.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentStpCstPortAutoEdge
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentStpCstPortAutoEdge",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-edge mode for the port. disable(2) - disables the auto-edge mode for the port. The default auto-edge mode is enabled.\"",
"::=",
"{",
"agentStpCstPortEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-edge mode for the port. disable(2) - disables the auto-edge mode for the port. The default auto-edge mode is enabled."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address', 'Ipv6AddressPrefix'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'QUANTA-SWITCH-MIB': ['switch', 'AgentPortMask']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.1 | agentStpCstPortOperEdge | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.2 | agentStpCstPortOperPointToPoint | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.3 | agentStpCstPortTopologyChangeAck | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.4 | agentStpCstPortEdge | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.5 | agentStpCstPortForwardingState | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.6 | agentStpCstPortId | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.7 | agentStpCstPortPathCost | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.8 | agentStpCstPortPriority | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.9 | agentStpCstDesignatedBridgeId | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.10 | agentStpCstDesignatedCost | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.11 | agentStpCstDesignatedPortId | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.12 | agentStpCstExtPortPathCost | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.13 | agentStpCstPortBpduGuardEffect | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.14 | agentStpCstPortBpduFilter | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.15 | agentStpCstPortBpduFlood | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.17 | agentStpCstPortRootGuard | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.18 | agentStpCstPortTCNGuard | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.15.9.1.19 | agentStpCstPortLoopGuard | 0 | 0 |