OID reference
1.3.6.1.4.1.7244.2.1.2.8.23.4.1.4
This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval.
Identification
{1 3 6 1 4 1 7244 2 1 2 8 23 4 1 4}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.7244.2.1.2.8.23.4.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
agentDhcpSnoopingIfBurstInterval OBJECT-TYPE
SYNTAX Integer32 (-1|1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the burst interval value
for rate limiting purpose on this interface. Value
of -1 indicates that there is no burst interval."
DEFVAL { -1 }
::= { agentDhcpSnoopingIfConfigEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentDhcpSnoopingIfBurstInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentDhcpSnoopingIfBurstInterval",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
"|",
"1",
".",
".",
"15",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval.\"",
"DEFVAL",
"{",
"-",
"1",
"}",
"::=",
"{",
"agentDhcpSnoopingIfConfigEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1
],
[
1,
15
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval."
],
null,
null,
null,
[
"DEFVAL",
-1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address', 'Ipv6AddressPrefix'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'QUANTA-SWITCH-MIB': ['switch', 'AgentPortMask']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7244.2.1.2.8.23.4.1.1 | agentDhcpSnoopingIfTrustEnable | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.8.23.4.1.2 | agentDhcpSnoopingIfLogEnable | 0 | 0 | |
| 1.3.6.1.4.1.7244.2.1.2.8.23.4.1.3 | agentDhcpSnoopingIfRateLimit | 0 | 0 |