OID reference

configL2IfaceFlow

1.3.6.1.4.1.738.1.5.100.2.2.2.1.8

Description

The desired flow mode for the interface. If the selected control is not available on the interface, a value of illegal (99) is returned. If the port type does NOT support the default value of autonegotiate (1), then the application will initialize the port to a valid value (e.g., 1000full (6)).Note that not all contro…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.738.1.5.100.2.2.2.1 (configL2IfaceEntry)
Node code
8
Node name
configL2IfaceFlow
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.738.1.5.100.2.2.2.1.8
URN notation
urn:oid:1.3.6.1.4.1.738.1.5.100.2.2.2.1.8
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 738 1 5 100 2 2 2 1 8}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) privateVendorOID(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) prvtVendorDefMIB(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) privateVendorOID(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) prvtVendorDefMIB(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) privateVendorOID(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) prvtVendorDefMIB(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) privateVendorOID(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) prvtVendorDefMIB(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) privateVendorOID(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) prvtVendorDefMIB(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) privateVendorOID(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) prvtVendorDefMIB(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) privateVendorOID(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) prvtVendorDefMIB(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) privateVendorOID(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) prvtVendorDefMIB(738) prvt-products(1) switch(5) prvtSwitchMib(100) config(2) configL2(2) configL2IfaceTable(2) configL2IfaceEntry(1) configL2IfaceFlow(8)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/738/1/5/100/2/2/2/1/8
  • /ISO/Identified-Organization/6/1/4/1/738/1/5/100/2/2/2/1/8
  • /ISO/3/6/1/4/1/738/1/5/100/2/2/2/1/8
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/738/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/enterprise/privateVendorOID/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/enterprise/prvtVendorDefMIB/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/enterprises/738/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/enterprises/privateVendorOID/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/enterprises/prvtVendorDefMIB/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/738/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/privateVendorOID/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/prvtVendorDefMIB/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/vendor-objects/738/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/vendor-objects/privateVendorOID/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/identified-organization/dod/internet/private/vendor-objects/prvtVendorDefMIB/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/org/dod/internet/private/enterprise/738/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/org/dod/internet/private/enterprise/privateVendorOID/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/org/dod/internet/private/enterprise/prvtVendorDefMIB/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • /iso/org/dod/internet/private/enterprises/738/prvt-products/switch/prvtSwitchMib/config/configL2/configL2IfaceTable/configL2IfaceEntry/configL2IfaceFlow
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Enumerated values

Notes below names come from selected MIB definitions.

ValueName and source notes
1autonegotiate
only for giga
2flowon
3flowoff

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In PRVT-SWITCH-MIB, the row index consists of these components in order:

  1. configL2IfaceUnit (Integer32): one numeric subidentifier for the non-negative value.
  2. configL2IfaceSlot (Integer32): one numeric subidentifier for the non-negative value.
  3. configL2IfacePort (Integer32): one numeric subidentifier for the non-negative value.

An instance has the form .1.3.6.1.4.1.738.1.5.100.2.2.2.1.8.<configL2IfaceUnit>.<configL2IfaceSlot>.<configL2IfacePort>. Use values present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.738.1.5.100.2.2.2.1.8

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

configL2IfaceFlow OBJECT-TYPE
SYNTAX INTEGER {
autonegotiate(1), -- only for giga
flowon(2),
flowoff(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired flow mode for the interface. If the selected control is not available
on the interface, a value of illegal (99) is returned. If the port type does NOT support
the default value of autonegotiate (1), then the application will initialize the port to a
valid value (e.g., 1000full (6)).Note that not all controls are available for all interfaces.
For example, only full-1000 (6) is available for Gigabit Ethernet interfaces."
::= { configL2IfaceEntry 8 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The desired flow mode for the interface. If the selected control is not available on the interface, a value of illegal (99) is returned. If the port type does NOT support the default value of autonegotiate (1), then the application will initialize the port to a valid value (e.g., 1000full (6)).Note that not all controls are available for all interfaces. For example, only full-1000 (6) is available for Gigabit Ethernet interfaces.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

configL2IfaceFlow · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: configL2IfaceFlow

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "configL2IfaceFlow",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "autonegotiate",
    "(",
    "1",
    ")",
    ",",
    "flowon",
    "(",
    "2",
    ")",
    ",",
    "flowoff",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The desired flow mode for the interface. If the selected control is not available on the interface, a value of illegal (99) is returned. If the port type does NOT support the default value of autonegotiate (1), then the application will initialize the port to a valid value (e.g., 1000full (6)).Note that not all controls are available for all interfaces. For example, only full-1000 (6) is available for Gigabit Ethernet interfaces.\"",
    "::=",
    "{",
    "configL2IfaceEntry",
    "8",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "autonegotiate",
            1
          ],
          [
            "flowon",
            2
          ],
          [
            "flowoff",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The desired flow mode for the interface. If the selected control is not available on the interface, a value of illegal (99) is returned. If the port type does NOT support the default value of autonegotiate (1), then the application will initialize the port to a valid value (e.g., 1000full (6)).Note that not all controls are available for all interfaces. For example, only full-1000 (6) is available for Gigabit Ethernet interfaces."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.738)

Killim Nahum

Siblings (23)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.738.1.5.100.2.2.2.1.1 configL2IfaceUnit00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.2 configL2IfaceSlot00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.3 configL2IfacePort00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.4 configL2IfaceName00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.5 configL2IfaceEnable00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.6 configL2IfaceSTPEnable00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.7 configL2IfaceDuplexSpeedSet00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.9 configL2IfaceBackpressure00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.10 configL2IfaceResetCounters00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.11 configL2IfaceDefaultVID00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.12 configL2IfaceSnifferIfIndex00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.13 configL2TopologyChangeDetection00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.14 configL2IfaceDuplexModeSet00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.15 configL2IfaceSpeedSet00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.16 configL2IfaceBroadcastRateLimit00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.17 configL2IfaceMulticastRateLimit00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.18 configL2IfaceUnknownRateLimit00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.19 configL2IfaceBroadcastBurstSize00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.20 configL2IfaceMulticastBurstSize00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.21 configL2IfaceUnknownBurstSize00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.22 configL2IfaceMtu00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.23 configL2IfaceAdminCrossOver00
1.3.6.1.4.1.738.1.5.100.2.2.2.1.24 configL2IfaceRemoteFaultDetect00