Compliance statement for agents that provide full support the MPLS-TE-STD-MIB module.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.738.1.6.5.2.3.2.1
Compliance statement for agents that provide full support the MPLS-TE-STD-MIB module.
Identification
{1 3 6 1 4 1 738 1 6 5 2 3 2 1}
The displayed source records contain one distinct definition. Compare its source records.
mplsTeModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide full
support the MPLS-TE-STD-MIB module."
MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.
MANDATORY-GROUPS {
ifGeneralInformationGroup,
ifCounterDiscontinuityGroup
}
MODULE -- this module
-- The mandatory group has to be implemented by all
-- LSRs that originate/terminate ESLSPs/tunnels.
-- In addition, depending on the type of tunnels
-- supported, other groups become mandatory as
-- explained below.
MANDATORY-GROUPS {
mplsTunnelGroup,
mplsTunnelScalarGroup
}
GROUP mplsTunnelManualGroup
DESCRIPTION
"This group is mandatory for devices which support
manual configuration of tunnels."
GROUP mplsTunnelSignaledGroup
DESCRIPTION
"This group is mandatory for devices which support
signaled tunnel set up."
GROUP mplsTunnelIsNotIntfcGroup
DESCRIPTION
"This group is mandatory for devices which support
tunnels that are not interfaces."
GROUP mplsTunnelIsIntfcGroup
DESCRIPTION
"This group is mandatory for devices which support
tunnels that are interfaces."
GROUP mplsTunnelCRLDPResOptionalGroup
DESCRIPTION
"Objects in this group are required by
implementations supporting the CR-LDP protocol for
signalling of TE tunnels."
GROUP mplsTunnelSonetGroup
DESCRIPTION
"Set of objects needed to implement Sonet."
GROUP mplsTunnelUniGroup
DESCRIPTION
"Set of objects needed to implement UNI."
GROUP mplsTunnelBackupGroup
DESCRIPTION
"Set of objects needed for backup tunnels."
GROUP mplsTunnelARHopGroup
DESCRIPTION
"Set of objects relating to ARHop."
GROUP mplsTunnelCHopGroup
DESCRIPTION
"Set of objects relating to CHop."
GROUP mplsDiffServGroup
DESCRIPTION
"Set of objects relating to DiffServ."
GROUP mplsTeNotificationGroup
DESCRIPTION "This group is mandatory for those implementations
which can implement the notifications
contained in this group."
OBJECT mplsTunnelRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is not
required."
OBJECT mplsTunnelHopRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is not
required."
OBJECT mplsTunnelCRLDPResRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is
not required."
::= { mplsTeCompliances 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Compliance statement for agents that provide full support the MPLS-TE-STD-MIB module.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: mplsTeModuleFullCompliance
{
"smi_kind": "MODULE-COMPLIANCE",
"definition": [
"mplsTeModuleFullCompliance",
"MODULE-COMPLIANCE",
"STATUS",
"current",
"DESCRIPTION",
"\"Compliance statement for agents that provide full support the MPLS-TE-STD-MIB module.\"",
"MODULE",
"IF-MIB",
"MANDATORY-GROUPS",
"{",
"ifGeneralInformationGroup",
",",
"ifCounterDiscontinuityGroup",
"}",
"MODULE",
"MANDATORY-GROUPS",
"{",
"mplsTunnelGroup",
",",
"mplsTunnelScalarGroup",
"}",
"GROUP",
"mplsTunnelManualGroup",
"DESCRIPTION",
"\"This group is mandatory for devices which support manual configuration of tunnels.\"",
"GROUP",
"mplsTunnelSignaledGroup",
"DESCRIPTION",
"\"This group is mandatory for devices which support signaled tunnel set up.\"",
"GROUP",
"mplsTunnelIsNotIntfcGroup",
"DESCRIPTION",
"\"This group is mandatory for devices which support tunnels that are not interfaces.\"",
"GROUP",
"mplsTunnelIsIntfcGroup",
"DESCRIPTION",
"\"This group is mandatory for devices which support tunnels that are interfaces.\"",
"GROUP",
"mplsTunnelCRLDPResOptionalGroup",
"DESCRIPTION",
"\"Objects in this group are required by implementations supporting the CR-LDP protocol for signalling of TE tunnels.\"",
"GROUP",
"mplsTunnelSonetGroup",
"DESCRIPTION",
"\"Set of objects needed to implement Sonet.\"",
"GROUP",
"mplsTunnelUniGroup",
"DESCRIPTION",
"\"Set of objects needed to implement UNI.\"",
"GROUP",
"mplsTunnelBackupGroup",
"DESCRIPTION",
"\"Set of objects needed for backup tunnels.\"",
"GROUP",
"mplsTunnelARHopGroup",
"DESCRIPTION",
"\"Set of objects relating to ARHop.\"",
"GROUP",
"mplsTunnelCHopGroup",
"DESCRIPTION",
"\"Set of objects relating to CHop.\"",
"GROUP",
"mplsDiffServGroup",
"DESCRIPTION",
"\"Set of objects relating to DiffServ.\"",
"GROUP",
"mplsTeNotificationGroup",
"DESCRIPTION",
"\"This group is mandatory for those implementations which can implement the notifications contained in this group.\"",
"OBJECT",
"mplsTunnelRowStatus",
"SYNTAX",
"RowStatus",
"{",
"active",
"(",
"1",
")",
",",
"notInService",
"(",
"2",
")",
"}",
"WRITE-SYNTAX",
"RowStatus",
"{",
"active",
"(",
"1",
")",
",",
"notInService",
"(",
"2",
")",
",",
"createAndGo",
"(",
"4",
")",
",",
"destroy",
"(",
"6",
")",
"}",
"DESCRIPTION",
"\"Support for createAndWait and notReady is not required.\"",
"OBJECT",
"mplsTunnelHopRowStatus",
"SYNTAX",
"RowStatus",
"{",
"active",
"(",
"1",
")",
",",
"notInService",
"(",
"2",
")",
"}",
"WRITE-SYNTAX",
"RowStatus",
"{",
"active",
"(",
"1",
")",
",",
"notInService",
"(",
"2",
")",
",",
"createAndGo",
"(",
"4",
")",
",",
"destroy",
"(",
"6",
")",
"}",
"DESCRIPTION",
"\"Support for createAndWait and notReady is not required.\"",
"OBJECT",
"mplsTunnelCRLDPResRowStatus",
"SYNTAX",
"RowStatus",
"{",
"active",
"(",
"1",
")",
",",
"notInService",
"(",
"2",
")",
"}",
"WRITE-SYNTAX",
"RowStatus",
"{",
"active",
"(",
"1",
")",
",",
"notInService",
"(",
"2",
")",
",",
"createAndGo",
"(",
"4",
")",
",",
"destroy",
"(",
"6",
")",
"}",
"DESCRIPTION",
"\"Support for createAndWait and notReady is not required.\"",
"::=",
"{",
"mplsTeCompliances",
"1",
"}"
],
"syntax_tree": [
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compliance statement for agents that provide full support the MPLS-TE-STD-MIB module."
],
null,
[
"ComplianceModules",
[
[
"IF-MIB",
[
"ifGeneralInformationGroup",
"ifCounterDiscontinuityGroup"
]
],
[
null,
[
"mplsTunnelGroup",
"mplsTunnelScalarGroup",
"mplsTunnelManualGroup",
"mplsTunnelSignaledGroup",
"mplsTunnelIsNotIntfcGroup",
"mplsTunnelIsIntfcGroup",
"mplsTunnelCRLDPResOptionalGroup",
"mplsTunnelSonetGroup",
"mplsTunnelUniGroup",
"mplsTunnelBackupGroup",
"mplsTunnelARHopGroup",
"mplsTunnelCHopGroup",
"mplsDiffServGroup",
"mplsTeNotificationGroup"
]
]
]
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: PRVT-MPLS-TE-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'StorageType', 'DisplayString', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'zeroDotZero', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'transmission'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PRVT-CR-LDP-MIB': ['mpls'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddressType', 'InetAddress', 'InetAddressIPv4'], 'PRVT-TEMIB-ENTITY-MIB': ['prvtMplsTeMibEntityIndex'], 'MPLS-TC-PRIV-STDEXT-MIB': ['MplsBitRate', 'MplsBurstSize', 'MplsLSPID', 'MplsTunnelIndex', 'MplsTunnelInstanceIndex', 'MplsTunnelAffinity', 'MplsExtendedTunnelId', 'MplsPathIndex', 'MplsPathIndexOrZero', 'MplsOwner', 'TeHopAddressType', 'TeHopAddress', 'TeHopAddressAS', 'TeHopAddressUnnum']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.6.5.2.3.2.2 | mplsTeModuleReadOnlyCompliance | 0 | 0 |