Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tnOamPingCtlTestMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"0",
")",
",",
"sdpPing",
"(",
"1",
")",
",",
"mtuPing",
"(",
"2",
")",
",",
"svcPing",
"(",
"3",
")",
",",
"macPing",
"(",
"5",
")",
",",
"macPopulate",
"(",
"6",
")",
",",
"macPurge",
"(",
"7",
")",
",",
"lspPing",
"(",
"8",
")",
",",
"vprnPing",
"(",
"9",
")",
",",
"atmPing",
"(",
"10",
")",
",",
"mfibPing",
"(",
"11",
")",
",",
"cpePing",
"(",
"12",
")",
",",
"mrInfo",
"(",
"13",
")",
",",
"vccvPing",
"(",
"14",
")",
",",
"icmpPing",
"(",
"15",
")",
",",
"dnsPing",
"(",
"16",
")",
",",
"ancpLoopback",
"(",
"17",
")",
",",
"p2mpLspPing",
"(",
"18",
")",
",",
"ethCfmLoopback",
"(",
"19",
")",
",",
"ethCfmTwoWayDelay",
"(",
"20",
")",
",",
"mobGtpPing",
"(",
"21",
")",
",",
"ethCfmTwoWaySlm",
"(",
"22",
")",
",",
"ethCfmTwoWayLm",
"(",
"23",
")",
",",
"ethCfmOneWayDelay",
"(",
"24",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the type of OAM ping test defined by this entry. The configuration parameters unique to a specific test type are to be found in an sparsely dependent table extension for that test type. none - the test type is unspecified. sdpPing - tests SDP connectivity and round trip time. mtuPing - tests MTU path size. svcPing - determines the existence and operative state of the service ID on the far end ESR. NOTE: This is a one-shot test. macQuery - obsolete. Originally specified functionality is as follows. - determines a specific address mapping for the service ID. See tnOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test. macPing - determines address mappings for the service ID. See tnOamMacPingCtlTable for additional parameters. macPopulate - populates an OAM MAC address into the FIBs. See tnOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test. macPurge - deletes an OAM MAC address from the FIBs. See tnOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test. lspPing - tests LSP path connectivity and round trip time. See tnOamLspPingCtlTable for additional parameters. vprnPing - tests IP path connectivity and round trip time within a specified VPRN service. See tnOamVprnPingCtlTable for additional parameters. atmPing - tests ATM path connectivity and round trip time on an ATM VCC. See tnOamAtmPingCtlTable for additional parameters. mfibPing - tests IP multicast connectivity and round trip time within a specified VPLS service. See tnOamMfibPingCtlTable for additional parameters. cpePing - determines IP connectivity to a CPE within a specified VPLS service. See tnOamCpePingCtlTable for additional parameters. mrInfo - Get multicast router's capabilities and the list of interfaces with neighbors. vccvPing - tests pseudowire connectivity and round trip time. See tnOamVccvPingCtlTable for additional parameters. icmpPing - tests IP connectivity and round trip time. See tnOamIcmpPingCtlTable for additional parameters. dnsPing - tests DNS name resolution connectivity and round trip time. ancpLoopback - send an OAM loopback test request to the access node. See tnOamAncpTestCtlTable for additional parameters. p2mpLspPing - tests P2MP LSP path connectivity and round trip time. Test mode cannot be p2mpLspPing if SAA is enabled. See tnOamP2mpLspPingCtlTable for additional parameters. ethCfmLoopback - performs Ethernet Connectivity Fault Management (CFM) loopback tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmLoopback test are in tnOamEthCfmPingCtlTable. ethCfmTwoWayDelay - performs Ethernet Connectivity Fault Management (CFM) two way delay tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmTwoWayDelay test are in tnOamEthCfmPingCtlTable. ethCfmOneWayDelay - performs Ethernet Connectivity Fault Management (CFM) one way delay tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmOneWayDelay test are in tnOamEthCfmPingCtlTable. mobGtpPing - Tests GTP (GPRS Tunnelling Protocol) path connectivity. ethCfmTwoWaySlm - performs Ethernet Connectivity Fault Management (CFM) two way Synthetic Loss Measurement (SLM) tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see TN-IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmTwoWaySlm test are in tnOamEthCfmPingCtlTable. ethCfmTwoWayLm - performs Ethernet Connectivity Fault Management (CFM) two way Loss Measurement (LM) tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see TN-IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmTwoWayLm test are in tnOamEthCfmPingCtlTable. \"",
"DEFVAL",
"{",
"none",
"}",
"::=",
"{",
"tnOamPingCtlEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
0
],
[
"sdpPing",
1
],
[
"mtuPing",
2
],
[
"svcPing",
3
],
[
"macPing",
5
],
[
"macPopulate",
6
],
[
"macPurge",
7
],
[
"lspPing",
8
],
[
"vprnPing",
9
],
[
"atmPing",
10
],
[
"mfibPing",
11
],
[
"cpePing",
12
],
[
"mrInfo",
13
],
[
"vccvPing",
14
],
[
"icmpPing",
15
],
[
"dnsPing",
16
],
[
"ancpLoopback",
17
],
[
"p2mpLspPing",
18
],
[
"ethCfmLoopback",
19
],
[
"ethCfmTwoWayDelay",
20
],
[
"mobGtpPing",
21
],
[
"ethCfmTwoWaySlm",
22
],
[
"ethCfmTwoWayLm",
23
],
[
"ethCfmOneWayDelay",
24
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the type of OAM ping test defined by this entry. The configuration parameters unique to a specific test type are to be found in an sparsely dependent table extension for that test type. none - the test type is unspecified. sdpPing - tests SDP connectivity and round trip time. mtuPing - tests MTU path size. svcPing - determines the existence and operative state of the service ID on the far end ESR. NOTE: This is a one-shot test. macQuery - obsolete. Originally specified functionality is as follows. - determines a specific address mapping for the service ID. See tnOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test. macPing - determines address mappings for the service ID. See tnOamMacPingCtlTable for additional parameters. macPopulate - populates an OAM MAC address into the FIBs. See tnOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test. macPurge - deletes an OAM MAC address from the FIBs. See tnOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test. lspPing - tests LSP path connectivity and round trip time. See tnOamLspPingCtlTable for additional parameters. vprnPing - tests IP path connectivity and round trip time within a specified VPRN service. See tnOamVprnPingCtlTable for additional parameters. atmPing - tests ATM path connectivity and round trip time on an ATM VCC. See tnOamAtmPingCtlTable for additional parameters. mfibPing - tests IP multicast connectivity and round trip time within a specified VPLS service. See tnOamMfibPingCtlTable for additional parameters. cpePing - determines IP connectivity to a CPE within a specified VPLS service. See tnOamCpePingCtlTable for additional parameters. mrInfo - Get multicast router's capabilities and the list of interfaces with neighbors. vccvPing - tests pseudowire connectivity and round trip time. See tnOamVccvPingCtlTable for additional parameters. icmpPing - tests IP connectivity and round trip time. See tnOamIcmpPingCtlTable for additional parameters. dnsPing - tests DNS name resolution connectivity and round trip time. ancpLoopback - send an OAM loopback test request to the access node. See tnOamAncpTestCtlTable for additional parameters. p2mpLspPing - tests P2MP LSP path connectivity and round trip time. Test mode cannot be p2mpLspPing if SAA is enabled. See tnOamP2mpLspPingCtlTable for additional parameters. ethCfmLoopback - performs Ethernet Connectivity Fault Management (CFM) loopback tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmLoopback test are in tnOamEthCfmPingCtlTable. ethCfmTwoWayDelay - performs Ethernet Connectivity Fault Management (CFM) two way delay tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmTwoWayDelay test are in tnOamEthCfmPingCtlTable. ethCfmOneWayDelay - performs Ethernet Connectivity Fault Management (CFM) one way delay tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmOneWayDelay test are in tnOamEthCfmPingCtlTable. mobGtpPing - Tests GTP (GPRS Tunnelling Protocol) path connectivity. ethCfmTwoWaySlm - performs Ethernet Connectivity Fault Management (CFM) two way Synthetic Loss Measurement (SLM) tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see TN-IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmTwoWaySlm test are in tnOamEthCfmPingCtlTable. ethCfmTwoWayLm - performs Ethernet Connectivity Fault Management (CFM) two way Loss Measurement (LM) tests. This MIB supports the SAA form of this test only (the OAM form uses a separate set of objects - see TN-IEEE8021-CFM-MIB). Additional parameters for the SAA ethCfmTwoWayLm test are in tnOamEthCfmPingCtlTable."
],
null,
null,
null,
[
"DEFVAL",
"none"
]
]
}