A possible mismatch was detected between the duplex setting
of either the local or remote interface and that of the
device attached to that interface. The interface (local
or remote) is identified by the 'jnxWxCommonEventDescr' object.
Note that this notification is quite different from
jnxWxCommonEventInterfaceSpeedMismatch, which compares the
local and remote interfaces on the same WX device.
Parsed from file JUNIPER-WX-MIB.my-3.txt
Company: None
Module: JUNIPER-WX-COMMON-MIB
A possible mismatch was detected between the duplex setting
of either the local or remote interface and that of the
device attached to that interface. The interface (local
or remote) is identified by the 'pnCommonEventDescr' object.
Note that this notification is quite different from
pnCommonEventInterfaceSpeedMismatch, which compares the
local and remote interfaces on the same Peribit device.
Parsed from file PERIBIT-COMMON-MIB.mib
Module: PERIBIT-COMMON-MIB
Vendor: Peribit Networks
Module: PERIBIT-COMMON-MIB
[Automatically extracted from oidview.com]
jnxWxCommonEventInterfaceDuplexMismatch NOTIFICATION-TYPE OBJECTS { jnxWxCommonEventDescr } STATUS current DESCRIPTION "A possible mismatch was detected between the duplex setting of either the local or remote interface and that of the device attached to that interface. The interface (local or remote) is identified by the 'jnxWxCommonEventDescr' object. Note that this notification is quite different from jnxWxCommonEventInterfaceSpeedMismatch, which compares the local and remote interfaces on the same WX device." ::= { jnxWxCommonEventEventsV2 14 }
pnCommonEventInterfaceDuplexMismatch NOTIFICATION-TYPE OBJECTS { pnCommonEventDescr } STATUS current DESCRIPTION "A possible mismatch was detected between the duplex setting of either the local or remote interface and that of the device attached to that interface. The interface (local or remote) is identified by the 'pnCommonEventDescr' object. Note that this notification is quite different from pnCommonEventInterfaceSpeedMismatch, which compares the local and remote interfaces on the same Peribit device." ::= { pnCommonEventEventsV2 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8239.2.1.3.2.0.1 | pnCommonEventInFailSafeMode, jnxWxCommonEventInFailSafeMode | 0 | 0 | This trap is sent when the device boots up in fail-safe mode. This can happen for one of the following reasons: o Fail-safe reboo… |
| 1.3.6.1.4.1.8239.2.1.3.2.0.2 | pnCommonEventPowerSupplyFailure, jnxWxCommonEventPowerSupplyFailure | 0 | 0 | One or more sources of power to the system has failed. A redundant power-supply has presumably taken over. NOTE: This trap is for… |
| 1.3.6.1.4.1.8239.2.1.3.2.0.3 | pnCommonEventPowerSupplyOk, jnxWxCommonEventPowerSupplyOk | 0 | 0 | One or more previously failed sources of power is now working normally. The transition to normal condition happened without the s… |
| 1.3.6.1.4.1.8239.2.1.3.2.0.4 | pnCommonEventLicenseExpired, jnxWxCommonEventLicenseExpired | 0 | 0 | The license for the system expired. As a result, the system will switch over to and stay in pass-through mode. |
| 1.3.6.1.4.1.8239.2.1.3.2.0.5 | pnCommonEventThruputLimitExceeded, jnxWxCommonEventThruputLimitExceeded | 0 | 0 | The throughput of traffic through the device has exceeded the limit for which it has been licensed. |
| 1.3.6.1.4.1.8239.2.1.3.2.0.6 | pnCommonEventLicenseWillExpire, jnxWxCommonEventLicenseWillExpire | 0 | 0 | The license for the system is about to expire shortly. When it eventually does expire, the system will switch over to and stay in … |
| 1.3.6.1.4.1.8239.2.1.3.2.0.7 | pnCommonEventLoginFailure, jnxWxCommonEventLoginFailure | 0 | 0 | A user's login attempt via the console/ssh/web server failed due to incorrect username or password. |
| 1.3.6.1.4.1.8239.2.1.3.2.0.8 | pnCommonEventFaultTolerantPassThrough, jnxWxCommonEventFaultTolerantPassThrough | 0 | 0 | An anomalous health condition was detected. It would have subsequently triggered hardware pass through mode followed by a reboot. |
| 1.3.6.1.4.1.8239.2.1.3.2.0.9 | pnCommonEventFanFailure, jnxWxCommonEventFanFailure | 0 | 0 | A cooling fan inside the device has failed. The 'pnCommonEventDescr' object has the name of the fan that failed. |
| 1.3.6.1.4.1.8239.2.1.3.2.0.10 | pnCommonEventFanSpeedVariation, jnxWxCommonEventFanSpeedVariation | 0 | 0 | The speed of a cooling fan inside the device is either too low or too high. The 'pnCommonEventDescr' object has the name of the f… |
| 1.3.6.1.4.1.8239.2.1.3.2.0.11 | pnCommonEventFanOk, jnxWxCommonEventFanOk | 0 | 0 | A cooling fan inside the device that had previously failed or whose speed variation was high is now working properly. The 'pnComm… |
| 1.3.6.1.4.1.8239.2.1.3.2.0.12 | pnCommonEventInterfaceSpeedMismatch, jnxWxCommonEventInterfaceSpeedMismatch | 0 | 0 | A mismatch is detected between the local and remote interface settings. This can happen due to a mismatch in the local and remote… |
| 1.3.6.1.4.1.8239.2.1.3.2.0.13 | pnCommonEventInterfaceSpeedOk, jnxWxCommonEventInterfaceSpeedOk | 0 | 0 | A mismatch previously detected between the local and remote interface settings is now resolved. The local and remote interface sp… |
| 1.3.6.1.4.1.8239.2.1.3.2.0.15 | pnCommonEventIpsecSecurityAssociationAdded, jnxWxCommonEventIpsecSecurityAssociationAdded | 0 | 0 | An IPSec security association has been negotiated and added to security association database. |
| 1.3.6.1.4.1.8239.2.1.3.2.0.16 | pnCommonEventIpsecSecurityAssociationExpired, jnxWxCommonEventIpsecSecurityAssociationExpired | 0 | 0 | An IPSec security association has been deleted from the security association database. |
| 1.3.6.1.4.1.8239.2.1.3.2.0.17 | pnCommonEventIpsecSecurityAssociationDeleted, jnxWxCommonEventIpsecSecurityAssociationDeleted | 0 | 0 | An IPSec security association has been deleted from the security association database. |