OID reference

ipsecSaCreation

1.3.6.1.4.1.838.3.14.1.5.1.3

Description

Security profile index. For static or dynamic inbound SAs, SPI is selected by us. For dynamic outbound SAs, SPI is selected by peer. For static outbound SAs, SPI is manually configured.

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.838.3.14.1.5.1 (ipsecSaEntry)
Node code
3
Node names
  • ipsecSaCreation
  • ipsecSaSpi
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.838.3.14.1.5.1.3
URN notation
urn:oid:1.3.6.1.4.1.838.3.14.1.5.1.3
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 838 3 14 1 5 1 3}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaCreation(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaSpi(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaCreation(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaSpi(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaCreation(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaSpi(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaCreation(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaSpi(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaCreation(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaSpi(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaCreation(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaSpi(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaCreation(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaSpi(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaCreation(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) xedia(838) xediaMibs(3) xediaIpsecMIB(14) ipsecObjects(1) ipsecSaTable(5) ipsecSaEntry(1) ipsecSaSpi(3)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/838/3/14/1/5/1/3
  • /ISO/Identified-Organization/6/1/4/1/838/3/14/1/5/1/3
  • /ISO/3/6/1/4/1/838/3/14/1/5/1/3
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaCreation
  • /iso/identified-organization/dod/internet/private/enterprise/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaSpi
  • /iso/identified-organization/dod/internet/private/enterprises/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaCreation
  • /iso/identified-organization/dod/internet/private/enterprises/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaSpi
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaCreation
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaSpi
  • /iso/identified-organization/dod/internet/private/vendor-objects/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaCreation
  • /iso/identified-organization/dod/internet/private/vendor-objects/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaSpi
  • /iso/org/dod/internet/private/enterprise/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaCreation
  • /iso/org/dod/internet/private/enterprise/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaSpi
  • /iso/org/dod/internet/private/enterprises/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaCreation
  • /iso/org/dod/internet/private/enterprises/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaSpi
  • /iso/org/dod/internet/private/ldap-enterprise/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaCreation
  • /iso/org/dod/internet/private/ldap-enterprise/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaSpi
  • /iso/org/dod/internet/private/vendor-objects/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaCreation
  • /iso/org/dod/internet/private/vendor-objects/xedia/xediaMibs/xediaIpsecMIB/ipsecObjects/ipsecSaTable/ipsecSaEntry/ipsecSaSpi
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER, Unsigned32
Maximum access defined by MIB
read-only, read-create
Status in MIB
current

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — MIBdepot

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Variant 2 — Circitor

Value type
Unsigned32
Maximum access defined by MIB
read-create
Status in MIB
current

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

ValueNameSource variants
1static1
2dynamic1

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index variants: ifIndex, ipsecSaName, ipsecSaIndex; ifIndex, ipsecTunnelName, ipsecSaIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.838.3.14.1.5.1.3

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

Security profile index. For static or dynamic inbound SAs,
SPI is selected by us. For dynamic outbound SAs, SPI is
selected by peer. For static outbound SAs, SPI is manually
configured.
Sources for this description

Circitor

Parsed from XEDIA-IPSEC-MIB.mib · XEDIA-IPSEC-MIB

Source file: Download XEDIA-IPSEC-MIB.mib

Source data warning: The file uses BIT STRING rather than the SMI BITS construct. The published spelling and declared bit positions are retained; no wire type or unspecified bit positions are inferred.

Browse all files from Circitor

Description 2

Specifies how SA was created. Manually configured SAs will
have the value static(1). Dynamical SAs such as those created by
key management protocols such as IKE will have the value
dynamic(2).
Sources for this description

MIBdepot

Source file: Download ipsec.mi2.txt

Source data warning: The file uses BIT STRING rather than the SMI BITS construct. The published spelling and declared bit positions are retained; no wire type or unspecified bit positions are inferred.

Browse all files from MIBdepot

Historical records

Additional source information

Information from OID Repository
Vendor: Lucent
Module: XEDIA-IPSEC-MIB (ipsec.mi2)
Type: TABULAR
Access: read-only
Syntax: INTEGER

Automatically extracted from www.mibdepot.com
Information from MIBdepot 
ipsecSaCreation OBJECT-TYPE
    SYNTAX      INTEGER {
                    static(1),
                    dynamic(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies how SA was created. Manually configured SAs will
         have the value static(1). Dynamical SAs such as those created by
         key management protocols such as IKE will have the value
         dynamic(2)."
    ::= { ipsecSaEntry 3 }
Information from Circitor 
ipsecSaSpi OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Security profile index. For static or dynamic inbound SAs,
        SPI is selected by us. For dynamic outbound SAs, SPI is
        selected by peer. For static outbound SAs, SPI is manually
        configured."
    ::= { ipsecSaEntry 3 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.838)

Kincaid Colin

Siblings (10)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.838.3.14.1.5.1.1 ipsecSaIndex, ipsecSaName00 The name of the tunnel or transport that this Security
Association is associated with.
1.3.6.1.4.1.838.3.14.1.5.1.2 ipsecSaSpi, ipsecSaIndex00 A numeric index to allow multiple Security Associations per
tunnel or transport.
1.3.6.1.4.1.838.3.14.1.5.1.4 ipsecSaDirection, ipsecSaCreation00 Specifies how SA was created. Manually configured SAs will
have the value static(1). Dynamical SAs such as those created by
key m…
1.3.6.1.4.1.838.3.14.1.5.1.5 ipsecSaProtocol, ipsecSaDirection00 SA direction. Traffic SAs are unidirectional whereas
key management protocol SAs such as ISA-KMP are bidirectional.
1.3.6.1.4.1.838.3.14.1.5.1.6 ipsecSaEncryptionKey, ipsecSaProtocol00 Specifies the SA protocol type.
1.3.6.1.4.1.838.3.14.1.5.1.7 ipsecSaAuthenticationKey, ipsecSaEncryptionKey00 The SAs encryption key. For a dynamic SA, the encryption
key is negotiated by the key management protocol such as
ISAKMP and is n…
1.3.6.1.4.1.838.3.14.1.5.1.8 ipsecSaInOutPkts, ipsecSaAuthenticationKey00 For dynamic SAs, the authentication keys have been negotiated
by ISAKMP. For static SA, the keys have been configured. For
stati…
1.3.6.1.4.1.838.3.14.1.5.1.9 ipsecSaInOutOctets, ipsecSaInOutPkts00 It counts a total number of frames since the SA was
created. For inbound SA it represents received frames. For
outbound SA it rep…
1.3.6.1.4.1.838.3.14.1.5.1.10 ipsecSaRowStatus, ipsecSaInOutOctets00 It counts a total number of bytes since the SA was
created. For inbound SA it represents received bytes. For
outbound SA it repre…
1.3.6.1.4.1.838.3.14.1.5.1.11 ipsecSaRowStatus00 This object allows entries to be created and deleted in this
table. The only supported values supported are active(1),
createAndG…