Base Band Unit system table entry.
Parsed from file FLARION-PHYS-MIB.mib
Module: FLARION-PHYS-MIB
Vendor: Flarion Technologies
Module: FLARION-PHYS-MIB
[Automatically extracted from oidview.com]
bbuSysEntry OBJECT-TYPE SYNTAX BbuSysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Base Band Unit system table entry." INDEX { bbuSysId } ::= { bbuSysTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.1 | bbuSysId | 0 | 0 | This identifies a single BBU in a basestation. |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.2 | bbuDspVer | 0 | 0 | The read-only statistic indicates the version number of the DSP software currently operational on the sector in question. It has … |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.3 | bbuLlcVer | 0 | 0 | The read-only statistic indicates the version number of the Link List Controller software/firmware currently operational on the s… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.4 | bbuTxFpgaVer | 0 | 0 | The read-only statistic indicates the version number of the Tx FPGA software/firmware currently operational on the sector in ques… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.5 | bbuRxFpgaVer | 0 | 0 | The read-only statistic indicates the version number of the Rx FPGA software/firmware currently operational on the sector in ques… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.6 | bbuLdpcVer | 0 | 0 | The read-only statistic indicates the version number of the LDPC encoder/decoder software/firmware currently operational on the s… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.50 | bbuRfChanNum | 0 | 0 | The RF channel number, in conjunction with the bbuRffBand object defines the frequency of operation. The channel number follows w… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.51 | bbuExtGainTx | 0 | 0 | Represents the total external gain in the Tx path. Typically it equals PA gain minus any attenuators. The value is in dB * 32 (sc… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.52 | bbuExtGainRx | 0 | 0 | Represents the total external gain in the Rx path. Typically it equals LNA gain minus any attenuators. The value is in dB * 32 (s… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.53 | bbuRfGainRx0 | 0 | 0 | Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx0 path. This gain is in addition to the gain provided by th… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.54 | bbuRfGainRx1 | 0 | 0 | Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx1 path. This gain is in addition to the gain provided by th… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.55 | bbuRfBand | 0 | 0 | The band of operation, represented by an enumeration. E.g., the 1.9 GHz PCS band has a value of 6, while the 2.1 GHz UMTS band ha… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.56 | bbuRfPowerTx0 | 0 | 0 | Represents the signal strength in dBm of the Tx signal put out on Tx0 by the TXU. An increase in this implies an increase in the … |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.57 | bbuRfPowerTx1 | 0 | 0 | Represents the signal strength in dBm of the Tx signal put out on Tx1 by the TXU. An increase in this implies an increase in the … |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.59 | bbuRfuEnableMask | 0 | 0 | This is a bit mask to choose between the 0 and 1 channels for Rx and Tx. The value should be an OR of the channels selected, wher… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.60 | bbuExtTxGain | 0 | 0 | External Tx gain. Valid range is -50.0 to 70.0. |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.61 | bbuExtRxGain | 0 | 0 | External Rx gain. Valid range is -50.0 to 70.0. |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.62 | bbuRfRx0Gain | 0 | 0 | Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx0 path. This gain is in addition to the gain provided by th… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.63 | bbuRfRx1Gain | 0 | 0 | Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx1 path. This gain is in addition to the gain provided by th… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.64 | bbuRfTx0Power | 0 | 0 | bbuRftx0Power |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.65 | bbuRfTx1Power | 0 | 0 | bbuRftx1Power |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.66 | bbuTxPwrDeviationLimit | 0 | 0 | None |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.70 | bbuSlope | 0 | 0 | Represents the slope of the RR sector. It is an identifier which allows a mobile to distinguish between signals from different ba… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.71 | bbuMcastSnr | 0 | 0 | None |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.72 | bbuScmType | 0 | 0 | None |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.91 | bbuSleepInactivityTimer | 0 | 0 | Represents the amount of time of data inactivity (on the forward or reverse links) after which a mobile moves to the Sleep state.… |
| 1.3.6.1.4.1.8603.1.2.1.2.5.1.100 | bbuLuTimer | 0 | 0 | Periodicity, in seconds, of location update done by a stationary mobile. This time period is conveyed to the mobile at the time o… |