Status in source: unspecified.
Technical details
{
"smi_kind": "MODULE-IDENTITY",
"definition": [
"lumMplsMIBModule",
"MODULE-IDENTITY",
"LAST-UPDATED",
[
"literal",
"223230313730363135303030305a22"
],
"ORGANIZATION",
"\"Infinera Corporation\"",
"CONTACT-INFO",
"\"techsupport@infinera.com\"",
"DESCRIPTION",
"\"The MIB module for management of MPLS. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The IF (interface) table contains information and configuration for all interfaces available for MPLS. (3) The XC table is used to associate in and out segments together, in order to form a cross-connect. (4) The Node table contains general information and configuration for each individual MPLS node. Every board in the physical node that supports MPLS is considered an individual MPLS node. (4) The tunnel table contains information and configuration for MPLS tunnel, which is a connection between two Label Switch Router, LSRs. (5) The LSP table contains information and configuration for each individual bidirectional Label Switched Path, LSP. (6) The tunnel-lsp table contains information about cross reference of tunnel and LSP. \"",
"REVISION",
[
"literal",
"223230313730363135303030305a22"
],
"DESCRIPTION",
"\"Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO\"",
"REVISION",
[
"literal",
"223230313631313330303030305a22"
],
"DESCRIPTION",
"\"Changes made for release r28.0: - Added mplsIfIfNo\"",
"REVISION",
[
"literal",
"223230313530313233303030305a22"
],
"DESCRIPTION",
"\"Changes made for release r24.0: - Added description fields for MPLS Tunnel and MPLS LSP; mplsTunnelDescr, mplsLspDescr\"",
"REVISION",
[
"literal",
"223230313331303131303030305a22"
],
"DESCRIPTION",
"\"Updated for software release R22.0\"",
"REVISION",
[
"literal",
"223230313330343031303030305a22"
],
"DESCRIPTION",
"\"Updated for software release R21.0\"",
"REVISION",
[
"literal",
"223230313231323230303030305a22"
],
"DESCRIPTION",
"\"Update for software release R20.0: - Removed traffic class from LSP to pseudowires. - Updated mplsTunnelBookedBW to 64bit counter to avoid wrap. - Corrected ranges for MplsIdentifier, tunnelId and lspId. - Added range for mplsLspPriority.\"",
"REVISION",
[
"literal",
"223230313230333031303030305a22"
],
"DESCRIPTION",
"\"Update for software release R19.0: - Added global ID and changed ITU ICC global ID to hidden. - Changed read/write properties of MEP IDs - Corrected maximum value of MEP IDs. - Changed support info. - Added support for BFD. - Added support for MPLS linear protection. - Added traffic class for LSP. - Changed storage class to read-create for XC out and in IF names.\"",
"REVISION",
[
"literal",
"223230313131323230303030305a22"
],
"DESCRIPTION",
"\"The initial revision of this module.\"",
"::=",
"{",
"lumModules",
"40",
"}"
],
"syntax_tree": [
[
"LAST-UPDATED",
"201706150000Z"
],
[
"ORGANIZATION",
"Infinera Corporation"
],
[
"CONTACT-INFO",
"techsupport@infinera.com"
],
[
"DESCRIPTION",
"The MIB module for management of MPLS. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The IF (interface) table contains information and configuration for all interfaces available for MPLS. (3) The XC table is used to associate in and out segments together, in order to form a cross-connect. (4) The Node table contains general information and configuration for each individual MPLS node. Every board in the physical node that supports MPLS is considered an individual MPLS node. (4) The tunnel table contains information and configuration for MPLS tunnel, which is a connection between two Label Switch Router, LSRs. (5) The LSP table contains information and configuration for each individual bidirectional Label Switched Path, LSP. (6) The tunnel-lsp table contains information about cross reference of tunnel and LSP."
],
[
"Revisions",
[
[
"201706150000Z",
[
"DESCRIPTION",
"Changes made for release r29.0: - Changed ORGANIZATION and CONTACT-INFO"
]
],
[
"201611300000Z",
[
"DESCRIPTION",
"Changes made for release r28.0: - Added mplsIfIfNo"
]
],
[
"201501230000Z",
[
"DESCRIPTION",
"Changes made for release r24.0: - Added description fields for MPLS Tunnel and MPLS LSP; mplsTunnelDescr, mplsLspDescr"
]
],
[
"201310110000Z",
[
"DESCRIPTION",
"Updated for software release R22.0"
]
],
[
"201304010000Z",
[
"DESCRIPTION",
"Updated for software release R21.0"
]
],
[
"201212200000Z",
[
"DESCRIPTION",
"Update for software release R20.0: - Removed traffic class from LSP to pseudowires. - Updated mplsTunnelBookedBW to 64bit counter to avoid wrap. - Corrected ranges for MplsIdentifier, tunnelId and lspId. - Added range for mplsLspPriority."
]
],
[
"201203010000Z",
[
"DESCRIPTION",
"Update for software release R19.0: - Added global ID and changed ITU ICC global ID to hidden. - Changed read/write properties of MEP IDs - Corrected maximum value of MEP IDs. - Changed support info. - Added support for BFD. - Added support for MPLS linear protection. - Added traffic class for LSP. - Changed storage class to read-create for XC out and in IF names."
]
],
[
"201112200000Z",
[
"DESCRIPTION",
"The initial revision of this module."
]
]
]
]
]
}