Status in source: current.
Names: invPhysName
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"invPhysName",
"OBJECT-TYPE",
"SYNTAX",
"MgmtNameString",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the 'console' of the device. This might be a text name, such as 'console' or a simple component number (e.g., port or module number), such as '1', depending on the physical component naming syntax of the device. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string. Note that the value of invPhysName for two physical entities will be the same in the event that the console interface does not distinguish between them, e.g., slot-1 and the card in slot-1. \"",
"::=",
"{",
"invPhysEntry",
"7",
"}"
],
"syntax_tree": [
[
"row",
"MgmtNameString"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the 'console' of the device. This might be a text name, such as 'console' or a simple component number (e.g., port or module number), such as '1', depending on the physical component naming syntax of the device. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string. Note that the value of invPhysName for two physical entities will be the same in the event that the console interface does not distinguish between them, e.g., slot-1 and the card in slot-1."
],
null,
null,
null,
null
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: LUM-INVENTORY-MIB
Vendor MIB copy from the LibreNMS archive.
Module: LUM-INVENTORY-MIB
See published definition above
Module imports
{'LUM-TC': ['MgmtNameString'], 'LUM-REG': ['lumModules', 'lumInventoryMIB'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'AutonomousType', 'TruthValue', 'DateAndTime', 'TestAndIncr', 'DisplayString', 'RowPointer'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'Integer32', 'Counter32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'NOTIFICATION-GROUP', 'MODULE-COMPLIANCE'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
Related source files and packages:
Same file in Observium Community.