OID reference
1.3.6.1.4.1.8708.2.46.2.4.1.1.21
The facility loopback setting. Rx is looped to Tx. The purpose of facility loopback is to test the line interface termination. disabled - Facility loopback is not set. This is the default setting. enabled - Facility loopback is set.
Identification
{1 3 6 1 4 1 8708 2 46 2 4 1 1 21}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ifBasicSignalFacilityLoopback OBJECT-TYPE
SYNTAX EnabledDisabledWithNA
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The facility loopback setting. Rx is looped to Tx.
The purpose of facility loopback is to test
the line interface termination.
disabled - Facility loopback is not set. This is the
default setting.
enabled - Facility loopback is set.
"
DEFVAL { disabled }
::= { ifBasicSignalEntry 21 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The facility loopback setting. Rx is looped to Tx. The purpose of facility loopback is to test the line interface termination. disabled - Facility loopback is not set. This is the default setting. enabled - Facility loopback is set.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ifBasicSignalFacilityLoopback
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ifBasicSignalFacilityLoopback",
"OBJECT-TYPE",
"SYNTAX",
"EnabledDisabledWithNA",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The facility loopback setting. Rx is looped to Tx. The purpose of facility loopback is to test the line interface termination. disabled - Facility loopback is not set. This is the default setting. enabled - Facility loopback is set. \"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"ifBasicSignalEntry",
"21",
"}"
],
"syntax_tree": [
[
"row",
"EnabledDisabledWithNA"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The facility loopback setting. Rx is looped to Tx. The purpose of facility loopback is to test the line interface termination. disabled - Facility loopback is not set. This is the default setting. enabled - Facility loopback is set."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: LUM-IFBASIC-MIB
See published definition above
{'LUM-TC': ['SignalFormat', 'AdminStatusWithNA', 'OperStatusWithNA', 'Unsigned32WithNA', 'SignalStatusWithNA', 'EnabledDisabledWithNA', 'Time7200min', 'Time7200minNo0', 'Layer', 'AutoAlarmStatus', 'ResetWithNA', 'FaultStatusWithNA', 'MgmtNameString', 'DisplayStringWithNA', 'CommandString', 'TribPortIdType', 'OpticalLayerMappingType', 'PhysicalLayerMappingType', 'SignalDirection', 'InterfaceStatus', 'ConnectorType', 'InterfaceType', 'TruthValueWithNA'], 'LUM-REG': ['lumModules', 'lumIfBasicMIB'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter64'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: LUM-IFBASIC-MIB
{'LUM-TC': ['SignalFormat', 'AdminStatusWithNA', 'OperStatusWithNA', 'Unsigned32WithNA', 'SignalStatusWithNA', 'EnabledDisabledWithNA', 'Time7200min', 'Time7200minNo0', 'Layer', 'AutoAlarmStatus', 'ResetWithNA', 'FaultStatusWithNA', 'MgmtNameString', 'DisplayStringWithNA', 'CommandString', 'TribPortIdType', 'OpticalLayerMappingType', 'PhysicalLayerMappingType', 'SignalDirection', 'InterfaceStatus', 'ConnectorType', 'InterfaceType', 'TruthValueWithNA'], 'LUM-REG': ['lumModules', 'lumIfBasicMIB'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter64'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.1 | ifBasicSignalIndex | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.2 | ifBasicSignalName | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.3 | ifBasicSignalSignalStructure | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.4 | ifBasicSignalSignalFormat | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.5 | ifBasicSignalFarEndLoopbackTerminatingLayer | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.6 | ifBasicSignalFarEndLoopback | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.7 | ifBasicSignalFarEndLoopbackTimeout | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.8 | ifBasicSignalNearEndLoopbackTerminatingLayer | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.9 | ifBasicSignalNearEndLoopback | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.10 | ifBasicSignalNearEndLoopbackTimeout | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.11 | ifBasicSignalFarEndLoopbackEnabled | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.12 | ifBasicSignalNearEndLoopbackEnabled | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.13 | ifBasicSignalOpticalLayerMapping | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.14 | ifBasicSignalConfigurationMismatch | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.15 | ifBasicSignalActualOpticalLayerMapping | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.16 | ifBasicSignalSpeed | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.17 | ifBasicSignalDirection | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.18 | ifBasicSignalFormatConfigurable | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.19 | ifBasicSignalFormatConfigurationSharedWithInterface | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.20 | ifBasicSignalPhysicalLayerMapping | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.22 | ifBasicSignalFacilityLoopbackTimeout | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.23 | ifBasicSignalFacilityLoopbackEnabled | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.24 | ifBasicSignalTerminalLoopback | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.25 | ifBasicSignalTerminalLoopbackTimeout | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.26 | ifBasicSignalTerminalLoopbackEnabled | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.27 | ifBasicSignalConnectorType | 0 | 0 |