OID reference
1.3.6.1.4.1.8708.2.46.2.4.1.1.24
The terminal loopback setting. Tx is looped to Rx. The purpose of a terminal loopback is to test the path through the equipment (a cross-connect, mux/demux stage, or similar) and execute the loop close to the outgoing interface. disabled - Terminal loopback is not set. This is the default setting. enabled - Terminal l…
Identification
{1 3 6 1 4 1 8708 2 46 2 4 1 1 24}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ifBasicSignalTerminalLoopback OBJECT-TYPE
SYNTAX EnabledDisabledWithNA
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The terminal loopback setting. Tx is looped to Rx.
The purpose of a terminal loopback is to test
the path through the equipment (a cross-connect,
mux/demux stage, or similar) and execute the loop
close to the outgoing interface.
disabled - Terminal loopback is not set. This is the
default setting.
enabled - Terminal loopback is set.
"
DEFVAL { disabled }
::= { ifBasicSignalEntry 24 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The terminal loopback setting. Tx is looped to Rx. The purpose of a terminal loopback is to test the path through the equipment (a cross-connect, mux/demux stage, or similar) and execute the loop close to the outgoing interface. disabled - Terminal loopback is not set. This is the default setting. enabled - Terminal loopback is set.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ifBasicSignalTerminalLoopback
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ifBasicSignalTerminalLoopback",
"OBJECT-TYPE",
"SYNTAX",
"EnabledDisabledWithNA",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The terminal loopback setting. Tx is looped to Rx. The purpose of a terminal loopback is to test the path through the equipment (a cross-connect, mux/demux stage, or similar) and execute the loop close to the outgoing interface. disabled - Terminal loopback is not set. This is the default setting. enabled - Terminal loopback is set. \"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"ifBasicSignalEntry",
"24",
"}"
],
"syntax_tree": [
[
"row",
"EnabledDisabledWithNA"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The terminal loopback setting. Tx is looped to Rx. The purpose of a terminal loopback is to test the path through the equipment (a cross-connect, mux/demux stage, or similar) and execute the loop close to the outgoing interface. disabled - Terminal loopback is not set. This is the default setting. enabled - Terminal loopback is set."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: LUM-IFBASIC-MIB
See published definition above
{'LUM-TC': ['SignalFormat', 'AdminStatusWithNA', 'OperStatusWithNA', 'Unsigned32WithNA', 'SignalStatusWithNA', 'EnabledDisabledWithNA', 'Time7200min', 'Time7200minNo0', 'Layer', 'AutoAlarmStatus', 'ResetWithNA', 'FaultStatusWithNA', 'MgmtNameString', 'DisplayStringWithNA', 'CommandString', 'TribPortIdType', 'OpticalLayerMappingType', 'PhysicalLayerMappingType', 'SignalDirection', 'InterfaceStatus', 'ConnectorType', 'InterfaceType', 'TruthValueWithNA'], 'LUM-REG': ['lumModules', 'lumIfBasicMIB'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter64'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: LUM-IFBASIC-MIB
{'LUM-TC': ['SignalFormat', 'AdminStatusWithNA', 'OperStatusWithNA', 'Unsigned32WithNA', 'SignalStatusWithNA', 'EnabledDisabledWithNA', 'Time7200min', 'Time7200minNo0', 'Layer', 'AutoAlarmStatus', 'ResetWithNA', 'FaultStatusWithNA', 'MgmtNameString', 'DisplayStringWithNA', 'CommandString', 'TribPortIdType', 'OpticalLayerMappingType', 'PhysicalLayerMappingType', 'SignalDirection', 'InterfaceStatus', 'ConnectorType', 'InterfaceType', 'TruthValueWithNA'], 'LUM-REG': ['lumModules', 'lumIfBasicMIB'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter64'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.1 | ifBasicSignalIndex | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.2 | ifBasicSignalName | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.3 | ifBasicSignalSignalStructure | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.4 | ifBasicSignalSignalFormat | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.5 | ifBasicSignalFarEndLoopbackTerminatingLayer | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.6 | ifBasicSignalFarEndLoopback | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.7 | ifBasicSignalFarEndLoopbackTimeout | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.8 | ifBasicSignalNearEndLoopbackTerminatingLayer | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.9 | ifBasicSignalNearEndLoopback | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.10 | ifBasicSignalNearEndLoopbackTimeout | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.11 | ifBasicSignalFarEndLoopbackEnabled | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.12 | ifBasicSignalNearEndLoopbackEnabled | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.13 | ifBasicSignalOpticalLayerMapping | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.14 | ifBasicSignalConfigurationMismatch | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.15 | ifBasicSignalActualOpticalLayerMapping | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.16 | ifBasicSignalSpeed | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.17 | ifBasicSignalDirection | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.18 | ifBasicSignalFormatConfigurable | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.19 | ifBasicSignalFormatConfigurationSharedWithInterface | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.20 | ifBasicSignalPhysicalLayerMapping | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.21 | ifBasicSignalFacilityLoopback | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.22 | ifBasicSignalFacilityLoopbackTimeout | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.23 | ifBasicSignalFacilityLoopbackEnabled | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.25 | ifBasicSignalTerminalLoopbackTimeout | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.26 | ifBasicSignalTerminalLoopbackEnabled | 0 | 0 | |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.27 | ifBasicSignalConnectorType | 0 | 0 |