OID reference
1.3.6.1.4.1.89.216.8.1.11
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
Identification
{1 3 6 1 4 1 89 216 8 1 11}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
The displayed source records contain one distinct definition. Compare its source records.
rlOspfv3IfRtrDeadInterval OBJECT-TYPE
SYNTAX Ospfv3DeadIntervalRangeTC
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down on the interface.
This should be some multiple of the Hello interval.
This value must be the same for all routers attached
to a common network."
DEFVAL { 40 }
::= { rlOspfv3IfEntry 11 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlOspfv3IfRtrDeadInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlOspfv3IfRtrDeadInterval",
"OBJECT-TYPE",
"SYNTAX",
"Ospfv3DeadIntervalRangeTC",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.\"",
"DEFVAL",
"{",
"40",
"}",
"::=",
"{",
"rlOspfv3IfEntry",
"11",
"}"
],
"syntax_tree": [
[
"row",
"Ospfv3DeadIntervalRangeTC"
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network."
],
null,
null,
null,
[
"DEFVAL",
40
]
]
}Vendor MIB copy from the Observium Community archive.
Module: RADLAN-OSPFV3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['AreaID', 'RouterID', 'Metric', 'BigMetric', 'Status', 'PositiveInteger', 'UpToMaxAge', 'TOSType', 'OspfAuthenticationType', 'HelloRange', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'TimeStamp', 'DisplayString'], 'OSPFV3-MIB': ['Ospfv3UpToRefreshIntervalTC', 'Ospfv3DeadIntervalRangeTC', 'Ospfv3RouterIdTC', 'Ospfv3LsIdTC', 'Ospfv3AreaIdTC', 'Ospfv3IfInstIdTC', 'Ospfv3LsaSequenceTC', 'Ospfv3LsaAgeTC'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Counter32', 'Gauge32', 'Integer32', 'Unsigned32', 'IpAddress'], 'RFC1213-MIB': ['mib-2'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'RADLAN-OSPF-MIB': ['RlOspfProcessID', 'RlOspfFastHelloMultiplierRange', 'RlOspfRestartHelperStatus', 'RlOspfRestartExitReason', 'RlOspfRouterIdType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetAddressIPv6']}Related source files and packages:
Module: RADLAN-OSPFV3-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['AreaID', 'RouterID', 'Metric', 'BigMetric', 'Status', 'PositiveInteger', 'UpToMaxAge', 'TOSType', 'OspfAuthenticationType', 'HelloRange', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'TimeStamp', 'DisplayString'], 'OSPFV3-MIB': ['Ospfv3UpToRefreshIntervalTC', 'Ospfv3DeadIntervalRangeTC', 'Ospfv3RouterIdTC', 'Ospfv3LsIdTC', 'Ospfv3AreaIdTC', 'Ospfv3IfInstIdTC', 'Ospfv3LsaSequenceTC', 'Ospfv3LsaAgeTC'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Counter32', 'Gauge32', 'Integer32', 'Unsigned32', 'IpAddress'], 'RFC1213-MIB': ['mib-2'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'RADLAN-OSPF-MIB': ['RlOspfProcessID', 'RlOspfFastHelloMultiplierRange', 'RlOspfRestartHelperStatus', 'RlOspfRestartExitReason', 'RlOspfRouterIdType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetAddressIPv6']}Related source files and packages:
Same file in MX510TX_MS510TXPP_MIBS_ODM_V6.7.0.42.zip.
Same file in MS510TX_TXPP_V6.7.0.37_MIB_V6.7.0.37.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.216.8.1.1 | rlOspfv3IfProcessId | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.2 | rlOspfv3IfIndex | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.3 | rlOspfv3IfInstId | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.4 | rlOspfv3IfAreaId | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.5 | rlOspfv3IfType | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.6 | rlOspfv3IfAdminStatus | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.7 | rlOspfv3IfRtrPriority | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.8 | rlOspfv3IfTransitDelay | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.9 | rlOspfv3IfRetransInterval | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.10 | rlOspfv3IfHelloInterval | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.12 | rlOspfv3IfPollInterval | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.13 | rlOspfv3IfState | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.14 | rlOspfv3IfDesignatedRouter | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.15 | rlOspfv3IfBackupDesignatedRouter | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.16 | rlOspfv3IfEvents | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.17 | rlOspfv3IfRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.18 | rlOspfv3IfDemand | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.19 | rlOspfv3IfMetricValue | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.20 | rlOspfv3IfLinkScopeLsaCount | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.21 | rlOspfv3IfLinkLsaCksumSum | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.22 | rlOspfv3IfDemandNbrProbe | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.23 | rlOspfv3IfDemandNbrProbeRetransLimit | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.24 | rlOspfv3IfDemandNbrProbeInterval | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.25 | rlOspfv3IfTEDisabled | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.26 | rlOspfv3IfLinkLSASuppression | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.27 | rlOspfv3IfOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.28 | rlOspfv3IfPassive | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.29 | rlOspfv3IfLsaRefreshIntvl | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.30 | rlOspfv3IfFastHelloMultiplier | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.31 | rlOspfv3IfMtuIgnore | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.32 | rlOspfv3IfNameLookup | 0 | 0 |