OID reference
1.3.6.1.4.1.89.216.8.1.13
The OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface may be in Down state if the underlying IPv6 interface is down or if the admin status is 'disabled' either globally or for the interface.
Identification
{1 3 6 1 4 1 89 216 8 1 13}
| Value | Name |
|---|---|
| 1 | down |
| 2 | loopback |
| 3 | waiting |
| 4 | pointToPoint |
| 5 | designatedRouter |
| 6 | backupDesignatedRouter |
| 7 | otherDesignatedRouter |
| 8 | standby |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: rlOspfv3IfProcessId, rlOspfv3IfIndex, rlOspfv3IfInstId.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.89.216.8.1.13
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
The displayed source records contain one distinct definition. Compare its source records.
rlOspfv3IfState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
loopback(2),
waiting(3),
pointToPoint(4),
designatedRouter(5),
backupDesignatedRouter(6),
otherDesignatedRouter(7),
standby(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 interface state. An interface may be
in standby state if there are multiple interfaces
on the link and another interface is active. The
interface may be in Down state if the underlying
IPv6 interface is down or if the admin status is
'disabled' either globally or for the interface."
::= { rlOspfv3IfEntry 13 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface may be in Down state if the underlying IPv6 interface is down or if the admin status is 'disabled' either globally or for the interface.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlOspfv3IfState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlOspfv3IfState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"down",
"(",
"1",
")",
",",
"loopback",
"(",
"2",
")",
",",
"waiting",
"(",
"3",
")",
",",
"pointToPoint",
"(",
"4",
")",
",",
"designatedRouter",
"(",
"5",
")",
",",
"backupDesignatedRouter",
"(",
"6",
")",
",",
"otherDesignatedRouter",
"(",
"7",
")",
",",
"standby",
"(",
"8",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface may be in Down state if the underlying IPv6 interface is down or if the admin status is 'disabled' either globally or for the interface.\"",
"::=",
"{",
"rlOspfv3IfEntry",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"down",
1
],
[
"loopback",
2
],
[
"waiting",
3
],
[
"pointToPoint",
4
],
[
"designatedRouter",
5
],
[
"backupDesignatedRouter",
6
],
[
"otherDesignatedRouter",
7
],
[
"standby",
8
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface may be in Down state if the underlying IPv6 interface is down or if the admin status is 'disabled' either globally or for the interface."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: RADLAN-OSPFV3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['AreaID', 'RouterID', 'Metric', 'BigMetric', 'Status', 'PositiveInteger', 'UpToMaxAge', 'TOSType', 'OspfAuthenticationType', 'HelloRange', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'TimeStamp', 'DisplayString'], 'OSPFV3-MIB': ['Ospfv3UpToRefreshIntervalTC', 'Ospfv3DeadIntervalRangeTC', 'Ospfv3RouterIdTC', 'Ospfv3LsIdTC', 'Ospfv3AreaIdTC', 'Ospfv3IfInstIdTC', 'Ospfv3LsaSequenceTC', 'Ospfv3LsaAgeTC'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Counter32', 'Gauge32', 'Integer32', 'Unsigned32', 'IpAddress'], 'RFC1213-MIB': ['mib-2'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'RADLAN-OSPF-MIB': ['RlOspfProcessID', 'RlOspfFastHelloMultiplierRange', 'RlOspfRestartHelperStatus', 'RlOspfRestartExitReason', 'RlOspfRouterIdType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetAddressIPv6']}Related source files and packages:
Module: RADLAN-OSPFV3-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['AreaID', 'RouterID', 'Metric', 'BigMetric', 'Status', 'PositiveInteger', 'UpToMaxAge', 'TOSType', 'OspfAuthenticationType', 'HelloRange', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'TimeStamp', 'DisplayString'], 'OSPFV3-MIB': ['Ospfv3UpToRefreshIntervalTC', 'Ospfv3DeadIntervalRangeTC', 'Ospfv3RouterIdTC', 'Ospfv3LsIdTC', 'Ospfv3AreaIdTC', 'Ospfv3IfInstIdTC', 'Ospfv3LsaSequenceTC', 'Ospfv3LsaAgeTC'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Counter32', 'Gauge32', 'Integer32', 'Unsigned32', 'IpAddress'], 'RFC1213-MIB': ['mib-2'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'RADLAN-OSPF-MIB': ['RlOspfProcessID', 'RlOspfFastHelloMultiplierRange', 'RlOspfRestartHelperStatus', 'RlOspfRestartExitReason', 'RlOspfRouterIdType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetAddressIPv6']}Related source files and packages:
Same file in MX510TX_MS510TXPP_MIBS_ODM_V6.7.0.42.zip.
Same file in MS510TX_TXPP_V6.7.0.37_MIB_V6.7.0.37.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.216.8.1.1 | rlOspfv3IfProcessId | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.2 | rlOspfv3IfIndex | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.3 | rlOspfv3IfInstId | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.4 | rlOspfv3IfAreaId | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.5 | rlOspfv3IfType | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.6 | rlOspfv3IfAdminStatus | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.7 | rlOspfv3IfRtrPriority | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.8 | rlOspfv3IfTransitDelay | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.9 | rlOspfv3IfRetransInterval | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.10 | rlOspfv3IfHelloInterval | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.11 | rlOspfv3IfRtrDeadInterval | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.12 | rlOspfv3IfPollInterval | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.14 | rlOspfv3IfDesignatedRouter | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.15 | rlOspfv3IfBackupDesignatedRouter | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.16 | rlOspfv3IfEvents | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.17 | rlOspfv3IfRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.18 | rlOspfv3IfDemand | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.19 | rlOspfv3IfMetricValue | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.20 | rlOspfv3IfLinkScopeLsaCount | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.21 | rlOspfv3IfLinkLsaCksumSum | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.22 | rlOspfv3IfDemandNbrProbe | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.23 | rlOspfv3IfDemandNbrProbeRetransLimit | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.24 | rlOspfv3IfDemandNbrProbeInterval | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.25 | rlOspfv3IfTEDisabled | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.26 | rlOspfv3IfLinkLSASuppression | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.27 | rlOspfv3IfOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.28 | rlOspfv3IfPassive | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.29 | rlOspfv3IfLsaRefreshIntvl | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.30 | rlOspfv3IfFastHelloMultiplier | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.31 | rlOspfv3IfMtuIgnore | 0 | 0 | |
| 1.3.6.1.4.1.89.216.8.1.32 | rlOspfv3IfNameLookup | 0 | 0 |