Specifies whether a port must belong to a VLAN in order
to participate in the STP.
Parsed from file radlan-mib.mib.txt
Company: compaq
Module: RADLAN-MIB
rldot1dStpPortMustBelongToVlan OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether a port must belong to a VLAN in order
to participate in the STP."
DEFVAL { true }
View at oid-info.com
rldot1dStpPortMustBelongToVlan OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether a port must belong to a VLAN in order to participate in the STP." DEFVAL { true } ::= { rldot1dStp 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.89.57.2.1 | rldot1dStpMibVersion | 0 | 0 | MIB's version, the current version is 2. |
1.3.6.1.4.1.89.57.2.2 | rldot1dStpType | 0 | 0 | Specifies whether the device supports Spanning Tree per device, or per group. |
1.3.6.1.4.1.89.57.2.3 | rldot1dStpEnable | 0 | 0 | Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans. |
1.3.6.1.4.1.89.57.2.5 | rldot1dStpExtendedPortNumberFormat | 0 | 0 | Specifies whether the STP uses the extended port fnumber format. |
1.3.6.1.4.1.89.57.2.6 | rldot1dStpVlanTable | 1 | 12 | A table that contains vlan-specific information for the Spanning Tree Protocol. |
1.3.6.1.4.1.89.57.2.7 | rldot1dStpVlanPortTable | 1 | 12 | A table that contains pair for the Spanning Tree Protocol. |
1.3.6.1.4.1.89.57.2.8 | rldot1dStpTrapVariable | 2 | 2 | None |
1.3.6.1.4.1.89.57.2.9 | rldot1dStpTypeAfterReset | 0 | 0 | New mode of spaning tree supported by the device after the next reset. |
1.3.6.1.4.1.89.57.2.10 | rldot1dStpMonitorTime | 0 | 0 | Factor of hello-time during which a port is monotored to determine if it is stable. |
1.3.6.1.4.1.89.57.2.11 | rldot1dStpBpduCount | 0 | 0 | The number of bpdu that need to received for the link to be considered stable. |
1.3.6.1.4.1.89.57.2.12 | rldot1dStpLastChanged | 0 | 0 | The last time any object in this table was changed by SNMP or other local management means. |
1.3.6.1.4.1.89.57.2.13 | rldot1dStpPortTable | 1 | 11 | A table that contains extended pair port specific information. |
1.3.6.1.4.1.89.57.2.14 | rldot1dStpPortsEnable | 0 | 0 | Enable / Disable spanning tree on ports by default . |
1.3.6.1.4.1.89.57.2.15 | rldot1dStpTaggedFlooding | 0 | 0 | flooding can be done in tagged bpdu . |
1.3.6.1.4.1.89.57.2.16 | rldot1dStpPortBelongToVlanDefault | 0 | 0 | The default value of rldot1dStpPortMustBelongToVlan . |
1.3.6.1.4.1.89.57.2.17 | rldot1dStpEnableByDefault | 0 | 0 | The default value of rldot1dStpEnable . |
1.3.6.1.4.1.89.57.2.18 | rldot1dStpPortToDefault | 0 | 0 | To order port/s to revert to default setings . |
1.3.6.1.4.1.89.57.2.19 | rldot1dStpSupportedType | 0 | 0 | The type of stp supported by the device. |
1.3.6.1.4.1.89.57.2.20 | rldot1dStpEdgeportSupportInStp | 0 | 0 | If EdgePort is supported in stpCompatible mode . |
1.3.6.1.4.1.89.57.2.21 | rldot1dStpFilterBpdu | 0 | 0 | Specified if the device should filter BPDUs when STP is disabled. |
1.3.6.1.4.1.89.57.2.22 | rldot1dStpFloodBpduMethod | 0 | 0 | Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging. |
1.3.6.1.4.1.89.57.2.23 | rldot1dStpSeparatedBridges | 3 | 5 | None |