Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"geConfSpeed",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"speed-auto",
"(",
"1",
")",
",",
"speed-1G-full",
"(",
"2",
")",
",",
"speed-2500M-full",
"(",
"3",
")",
",",
"speed-10G-full",
"(",
"4",
")",
",",
"speed-100M-full",
"(",
"5",
")",
",",
"speed-100M-half",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Configures speed of gigabit uplink interface speed-auto(1): the system configures uplink speed according to plugged-in transceiver module, if a 1Gbps only transceiver detected then interface speed 1Gbps is configured if a 10Gbps only transceiver detected then interface speed 10Gbps is configured speed-1G-full(2): the system configures interface speed to 1Gbps and full duplex once a dual speed transceiver SFP+ module plugged in, otherwise configure it according to transceiver's speed. speed-2500M-full(3):the system configures interface speed to 2.5Gbps and full duplex once a dual speed transceiver SFP+ module plugged in, otherwise configure it according to transceiver's speed. speed-10G-full(4): the system configures interface speed to 10Gbps and full duplex once a dual speed transceiver SFP+ module plugged in, otherwise configure it according to transceiver's speed. speed-100M-full(5): for GLC card interface only and not for gigabit uplink interface speed-100M-half(6): for GLC card interface only and not for gigabit uplink interface Default: speed-auto(1) Reference: SFF-8472 Rev 11.0 (ftp://ftp.seagate.com/sff) \"",
"::=",
"{",
"geConfEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"speed-auto",
1
],
[
"speed-1G-full",
2
],
[
"speed-2500M-full",
3
],
[
"speed-10G-full",
4
],
[
"speed-100M-full",
5
],
[
"speed-100M-half",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Configures speed of gigabit uplink interface speed-auto(1): the system configures uplink speed according to plugged-in transceiver module, if a 1Gbps only transceiver detected then interface speed 1Gbps is configured if a 10Gbps only transceiver detected then interface speed 10Gbps is configured speed-1G-full(2): the system configures interface speed to 1Gbps and full duplex once a dual speed transceiver SFP+ module plugged in, otherwise configure it according to transceiver's speed. speed-2500M-full(3):the system configures interface speed to 2.5Gbps and full duplex once a dual speed transceiver SFP+ module plugged in, otherwise configure it according to transceiver's speed. speed-10G-full(4): the system configures interface speed to 10Gbps and full duplex once a dual speed transceiver SFP+ module plugged in, otherwise configure it according to transceiver's speed. speed-100M-full(5): for GLC card interface only and not for gigabit uplink interface speed-100M-half(6): for GLC card interface only and not for gigabit uplink interface Default: speed-auto(1) Reference: SFF-8472 Rev 11.0 (ftp://ftp.seagate.com/sff)"
],
null,
null,
null,
null
]
}