The real-time transmitting data rate in kbps
Sources for this description
Zyxel MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.890.1.5.13.5.13.14.1.1.2
The real-time transmitting data rate in kbps
Identification
{1 3 6 1 4 1 890 1 5 13 5 13 14 1 1 2}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.890.1.5.13.5.13.14.1.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ifOutRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The real-time transmitting data rate in kbps"
::= { ifStatusEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The real-time transmitting data rate in kbps
Zyxel MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ifOutRate
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ifOutRate",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The real-time transmitting data rate in kbps\"",
"::=",
"{",
"ifStatusEntry",
"2",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The real-time transmitting data rate in kbps"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Zyxel support.
Module: ZYXEL-IES5000-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['MacAddress', 'Timeout', 'BridgeId', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Counter64', 'Counter32', 'Gauge32', 'Integer32', 'Unsigned32', 'IpAddress', 'NOTIFICATION-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ifIndex'], 'P-BRIDGE-MIB': ['dot1dTrafficClass', 'EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanIndex'], 'VDSL-LINE-MIB': ['vdslPhysSide', 'vdslChanCurrTxRate', 'vdslLineConfProfileName', 'vdslLineAlarmConfProfileName'], 'VDSL2-LINE-MIB': ['xdsl2PMChHist15MUnit', 'xdsl2PMChHist15MInterval', 'xdsl2PMLHist1DUnit', 'xdsl2PMLHist1DInterval', 'xdsl2PMLHist15MUnit', 'xdsl2PMLHist15MInterval', 'xdsl2PMChHist1DUnit', 'xdsl2PMChHist1DInterval', 'xdsl2PMLCurrUnit', 'xdsl2LConfProfProfileName', 'xdsl2ChConfProfProfileName', 'xdsl2LineAlarmConfProfileName', 'xdsl2LineBand', 'xdsl2LConfTempTemplateName', 'xdsl2LAlarmConfTempTemplateName', 'xdsl2ChAlarmConfProfileName', 'xdsl2SCStatusDirection', 'xdsl2SCStatusBand'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMdMdLevel', 'dot1agCfmVlanPrimaryVid', 'dot1agCfmMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.5.13.5.13.14.1.1.1 | ifInRate | 0 | 0 | |
| 1.3.6.1.4.1.890.1.5.13.5.13.14.1.1.3 | ifCurrentStatus | 0 | 0 | |
| 1.3.6.1.4.1.890.1.5.13.5.13.14.1.1.4 | ifUpTime | 0 | 0 |