Description 1
timer for this LDP Entity.
Sources for this description
Cisco
Source file: Download MPLS-LDP-MIB.my · Publisher's file
Source file: Download MPLS-LDP-MIB.my.txt
Cisco SMIv1
Source file: Download MPLS-LDP-MIB-V1SMI.my · Publisher's file
OID reference
1.3.6.1.4.1.9.10.65.1.2.2.1.8
The two octet value which is the proposed keep alive hold timer for this LDP Entity.
Identification
{1 3 6 1 4 1 9 10 65 1 2 2 1 8}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: mplsLdpEntityLdpId, mplsLdpEntityIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.9.10.65.1.2.2.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
mplsLdpEntityMaxPduLength OBJECT-TYPE
SYNTAX Gauge(0..65535)
-- Units
-- octets
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum PDU Length that is sent in
the Common Session Parameters of an Initialization
Message. A value of 255 or less specifies the
default maximum length of 4096 octets."
REFERENCE
"See Section on the 'Initialization Message' in the
LDP Specification."
DEFVAL { 4096 }
::= { mplsLdpEntityEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Source file: Download MPLS-LDP-MIB.my · Publisher's file
Source file: Download MPLS-LDP-MIB.my.txt
Source file: Download MPLS-LDP-MIB-V1SMI.my · Publisher's file
Description 2
The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. A value of 255 or less specifies the default maximum length of 4096 octets.
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: mandatory.
Names: mplsLdpEntityMaxPduLength
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mplsLdpEntityMaxPduLength",
"OBJECT-TYPE",
"SYNTAX",
"Gauge",
"(",
"0",
".",
".",
"65535",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. A value of 255 or less specifies the default maximum length of 4096 octets.\"",
"REFERENCE",
"\"See Section on the 'Initialization Message' in the LDP Specification.\"",
"DEFVAL",
"{",
"4096",
"}",
"::=",
"{",
"mplsLdpEntityEntry",
"8",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Gauge",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. A value of 255 or less specifies the default maximum length of 4096 octets."
],
[
"REFERENCE",
"See Section on the 'Initialization Message' in the LDP Specification."
],
null,
null,
[
"DEFVAL",
4096
]
]
}Module: MPLS-LDP-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CISCO-SMI': ['ciscoExperiment'], 'ATM-TC-MIB': ['AtmVpIdentifier'], 'MPLS-TC-MIB': ['MplsAtmVcIdentifier', 'MplsLabel', 'MplsLdpGenAddr', 'MplsLdpIdentifier', 'MplsLdpLabelTypes', 'MplsLsrIdentifier'], 'RFC1155-SMI': ['Counter', 'Gauge'], 'SNMPv2-TC-v1': ['RowStatus', 'TimeInterval', 'TruthValue', 'TimeStamp', 'StorageType'], 'SNMPv2-SMI-v1': ['transmission'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Historical records
mplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The two octet value which is the proposed keep alive hold
timer for this LDP Entity."
::= { mplsLdpEntityEntry 8 }
mplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The two octet value which is the proposed keep alive hold
timer for this LDP Entity."
::= { mplsLdpEntityEntry 8 }
mplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The two octet value which is the proposed keep alive hold
timer for this LDP Entity."
::= { mplsLdpEntityEntry 8 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.65.1.2.2.1.1 | mplsLdpEntityLdpId | 0 | 0 | The LDP identifier. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific la… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.2 | mplsLdpEntityIndex | 0 | 0 | This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'mplsLdpEntityIn… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.3 | mplsLdpEntityProtocolVersion | 0 | 0 | The version number of the protocol. The value of 0 on a read indicates that the version of the protocol is unknown. Otherwise, t… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.4 | mplsLdpEntityAdminStatus | 0 | 0 | The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already at… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.5 | mplsLdpEntityOperStatus | 0 | 0 | The operational status of this LDP Entity. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.6 | mplsLdpEntityWellKnownDiscoveryPort, mplsLdpEntityTcpDscPort | 0 | 0 | The well known LDP Discovery Port. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.7 | mplsLdpEntityMaxPduLength, mplsLdpEntityUdpDscPort | 0 | 0 | The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. A value of 255 or less specifi… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.9 | mplsLdpEntityHelloHoldTimer, mplsLdpEntityKeepAliveHoldTimer | 0 | 0 | The two octet value which is the proposed Hello hold timer for this LDP Entity. A value of 0 means use the default, which is 15 s… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.10 | mplsLdpEntityFailedInitSessionTrapEnable, mplsLdpEntityHelloHoldTimer | 0 | 0 | Indicates whether the 'mplsLdpFailedInitSessionThresholdExceeded' trap should be generated. If the value of this object is 'enable… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.11 | mplsLdpEntityFailedInitSessionThreshold, mplsLdpEntityInitSesThreshold | 0 | 0 | When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'mplsLdpFail… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.12 | mplsLdpEntityLabelDistributionMethod, mplsLdpEntityLabelDistMethod | 0 | 0 | For any given LDP session, the method of label distribution must be specified. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.13 | mplsLdpEntityPVLimitMismatchTrapEnable, mplsLdpEntityLabelRetentionMode | 0 | 0 | mplsLdpEntityPVLimitMismatchtrapEnable |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.14 | mplsLdpEntityPathVectorLimit, mplsLdpEntityPVLMisTrapEnable | 0 | 0 | If the value of this object is 0 (zero) then Loop Dection for Path Vectors is disabled. Otherwise, if this object has a value gre… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.15 | mplsLdpEntityHopCountLoopDetection, mplsLdpEntityPVL | 0 | 0 | An indication of whether loop detection based on hop count is disabled or enabled for this Entity. If this object has the value … |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.16 | mplsLdpEntityHopCount, mplsLdpEntityHopCountLimit | 0 | 0 | If the value of 'mplsLdpEntityHopCountLoopDetection' for this entry is 'enabled(1)', then this object represents the initial Hop … |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.17 | mplsLdpEntityTargetedPeer, mplsLdpEntityTargPeer | 0 | 0 | If this LDP entity uses targeted peer then set this to true. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.18 | mplsLdpEntityTargetedPeerAddrType, mplsLdpEntityTargPeerAddrType | 0 | 0 | The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of mplsLdpEntityT… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.19 | mplsLdpEntityTargetedPeerAddr, mplsLdpEntityTargPeerAddr | 0 | 0 | The value of the internetwork layer address used for the Extended Discovery. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.20 | mplsLdpEntityOptionalParameters | 0 | 0 | Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters wil… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.21 | mplsLdpEntityDiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. … |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.22 | mplsLdpEntityStorageType, mplsLdpEntityStorType | 0 | 0 | The storage type for this entry. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.23 | mplsLdpEntityRowStatus | 0 | 0 | An object that allows entries in this table to be created and deleted using the RowStatus convention. Once the 'mplsLdpEntityAdmin… |