Indicates whether MAC addresses learned one side
of a translational bridge should not be allowed to
be learned on the other side of the bridge. The
presence certain misbehaving devices on the
network may require this option to be enabled.
Parsed from file CISCO-STACK-MIB.mib
Module: CISCO-STACK-MIB
Indicates whether MAC addresses learned one side
of a translational bridge should not be allowed to
be learned on the other side of the bridge. The
presence certain misbehaving devices on the
network may require this option to be enabled.
brouterEnableFddiCheck OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether MAC addresses learned one side of
a translational bridge should not be allowed to be
learned on the other side of the bridge. The
presence certain misbehaving devices on the network
may require this option to be enabled."
DEFVAL { disabled }
View at oid-info.com
Indicates whether MAC addresses learned one side
of a translational bridge should not be allowed to
be learned on the other side of the bridge. The
presence certain misbehaving devices on the
network may require this option to be enabled.
Parsed from file cisco-stack-mib.mib.txt
Company: None
Module: CISCO-STACK-MIB
Indicates whether MAC addresses learned one side
of a translational bridge should not be allowed to
be learned on the other side of the bridge. The
presence certain misbehaving devices on the
network may require this option to be enabled.
brouterEnableFddiCheck OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether MAC addresses learned one side of a translational bridge should not be allowed to be learned on the other side of the bridge. The presence certain misbehaving devices on the network may require this option to be enabled." DEFVAL { disabled } ::= { brouterGrp 17 }
brouterEnableFddiCheck OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether MAC addresses learned one side of a translational bridge should not be allowed to be learned on the other side of the bridge. The presence certain misbehaving devices on the network may require this option to be enabled." DEFVAL { disabled } ::= { brouterGrp 17 }
Automatically extracted from Cisco "SNMP v2 MIBs".
brouterEnableFddiCheck OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether MAC addresses learned one side of a translational bridge should not be allowed to be learned on the other side of the bridge. The presence certain misbehaving devices on the network may require this option to be enabled." DEFVAL { disabled } ::= { brouterGrp 17 }
brouterEnableFddiCheck OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether MAC addresses learned one side of a translational bridge should not be allowed to be learned on the other side of the bridge. The presence certain misbehaving devices on the network may require this option to be enabled." DEFVAL { disabled } ::= { brouterGrp 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.5.1.6.17.0 | brouterEnableFddiCheck | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.5.1.6.1 | brouterEnableRip | 1 | 1 | Indicates whether the RIP protocol is enabled. |
| 1.3.6.1.4.1.9.5.1.6.2 | brouterEnableSpantree | 1 | 1 | Indicates if Spanning Tree protocol is enabled. |
| 1.3.6.1.4.1.9.5.1.6.3 | brouterEnableGiantCheck | 1 | 1 | Indicates whether special handling of giant packets is enabled. |
| 1.3.6.1.4.1.9.5.1.6.4 | brouterEnableIpFragmentation | 1 | 1 | Indicates whether IP fragmentation is enabled. |
| 1.3.6.1.4.1.9.5.1.6.5 | brouterEnableUnreachables | 1 | 1 | Indicates whether ICMP unreachable messages are sent by the system. |
| 1.3.6.1.4.1.9.5.1.6.6 | brouterCamAgingTime | 1 | 1 | The aging time for the CAM table. This duplicate item is the same value as dot1dTpAgingTime. |
| 1.3.6.1.4.1.9.5.1.6.7 | brouterCamMode | 1 | 1 | Mode in which the CAM module is operating. |
| 1.3.6.1.4.1.9.5.1.6.8 | brouterIpxSnapToEther | 1 | 1 | The default translation for IPX packets when bridging from FDDI SNAP to Ethernet. |
| 1.3.6.1.4.1.9.5.1.6.9 | brouterIpx8023RawToFddi | 1 | 1 | The default translation for IPX packets when bridging from Ethernet 802.3 Raw to FDDI. |
| 1.3.6.1.4.1.9.5.1.6.10 | brouterEthernetReceiveMax | 1 | 1 | Maximum number of Ethernet receive buffers processed at one time per port. |
| 1.3.6.1.4.1.9.5.1.6.11 | brouterEthernetTransmitMax | 1 | 1 | Maximum number of Ethernet transmit buffers processed at one time per port. |
| 1.3.6.1.4.1.9.5.1.6.12 | brouterFddiReceiveMax | 1 | 1 | Maximum number of FDDI receive buffers processed at one time per port. |
| 1.3.6.1.4.1.9.5.1.6.13 | brouterFddiTransmitMax | 1 | 1 | Maximum number of FDDI transmit buffers processed at one time per port. |
| 1.3.6.1.4.1.9.5.1.6.14 | brouterPortTable | 1 | 9 | A list of brouter port entries. The number of entries is determined by the number of modules in the chassis and the number of por… |
| 1.3.6.1.4.1.9.5.1.6.15 | brouterIpx8022ToEther | 1 | 1 | The default translation for IPX packets when bridging from FDDI 802.2 to Ethernet. |
| 1.3.6.1.4.1.9.5.1.6.16 | brouterEnableTransitEncapsulation | 1 | 1 | Indicates whether Ethernet packets are encapsulated on FDDI via transit encapsulation protocol. Normally this option would be dis… |
| 1.3.6.1.4.1.9.5.1.6.18 | brouterEnableAPaRT | 1 | 1 | Indicates whether the Automatic Packet Recognition and Translation feature is enabled on translational bridge(s) in the box. If A… |