This object indicates the current defect status of the Fibre Channel controller. Valid values are - noAlarm(0): No Alarm. This bit will be set when none of the following defect bits are set. los(1): LOS (Loss Of Signal). This bit will be set when LOS alarm condition is detected on the Fibre Channel Recieve side. syncLoss(2): Sync Loss alarm. pcsErr(3): PCS (Physical Coding Sublayer) Error alarm. hiBer(4): high BER(Block Errored Seconds Ratio) alarm. localFault(5): Local Fault alarm. remoteFault(6): Remote Fault alarm. nos(7): NOS (Not-Operational primitive Sequence). squelch(8): Squelch alarm.
Status in source: current.
Names: coiFibreChanControllerAlarmStatus
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"coiFibreChanControllerAlarmStatus",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"noAlarm",
"(",
"0",
")",
",",
"los",
"(",
"1",
")",
",",
"syncLoss",
"(",
"2",
")",
",",
"pcsErr",
"(",
"3",
")",
",",
"hiBer",
"(",
"4",
")",
",",
"localFault",
"(",
"5",
")",
",",
"remoteFault",
"(",
"6",
")",
",",
"nos",
"(",
"7",
")",
",",
"squelch",
"(",
"8",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the current defect status of the Fibre Channel controller. Valid values are - noAlarm(0): No Alarm. This bit will be set when none of the following defect bits are set. los(1): LOS (Loss Of Signal). This bit will be set when LOS alarm condition is detected on the Fibre Channel Recieve side. syncLoss(2): Sync Loss alarm. pcsErr(3): PCS (Physical Coding Sublayer) Error alarm. hiBer(4): high BER(Block Errored Seconds Ratio) alarm. localFault(5): Local Fault alarm. remoteFault(6): Remote Fault alarm. nos(7): NOS (Not-Operational primitive Sequence). squelch(8): Squelch alarm.\"",
"::=",
"{",
"coiFibreChanControllerEntry",
"4",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"noAlarm",
0
],
[
"los",
1
],
[
"syncLoss",
2
],
[
"pcsErr",
3
],
[
"hiBer",
4
],
[
"localFault",
5
],
[
"remoteFault",
6
],
[
"nos",
7
],
[
"squelch",
8
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the current defect status of the Fibre Channel controller. Valid values are - noAlarm(0): No Alarm. This bit will be set when none of the following defect bits are set. los(1): LOS (Loss Of Signal). This bit will be set when LOS alarm condition is detected on the Fibre Channel Recieve side. syncLoss(2): Sync Loss alarm. pcsErr(3): PCS (Physical Coding Sublayer) Error alarm. hiBer(4): high BER(Block Errored Seconds Ratio) alarm. localFault(5): Local Fault alarm. remoteFault(6): Remote Fault alarm. nos(7): NOS (Not-Operational primitive Sequence). squelch(8): Squelch alarm."
],
null,
null,
null,
null
]
}- Cisco
· Publisher's source file
· Archived source file
Source location: CISCO-FIBRECHANNEL-MIB::coiFibreChanControllerAlarmStatus.Source version and references
Downloaded: 2026-10-19T00:18:11.285616+00:00. SHA-256:
ddd17a53f3d3ce2649f387b4738d301486e0a4c62a8654060ef6bca78c8c41bb{'kind': 'OBJECT-TYPE', 'details': {'module': 'CISCO-FIBRECHANNEL-MIB', 'imports': {'IF-MIB': ['ifIndex', 'ifName'], 'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'MacAddress', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}, 'smi_kind': 'OBJECT-TYPE', 'definition': 'coiFibreChanControllerAlarmStatus OBJECT-TYPE\n SYNTAX BITS {\n noAlarm(0),\n los(1),\n syncLoss(2),\n pcsErr(3),\n hiBer(4),\n localFault(5),\n remoteFault(6),\n nos(7),\n squelch(8)\n }\n MAX-ACCESS read-only\n STATUS current\n DESCRIPTION\n "This object indicates the current defect status of the Fibre Channel \n controller. Valid values are - \n noAlarm(0): No Alarm. This bit will be set when none of the \n following defect bits are set.\n los(1): LOS (Loss Of Signal). This bit will be set when\n LOS alarm condition is detected on the Fibre Channel\n Recieve side.\n syncLoss(2): Sync Loss alarm.\n pcsErr(3): PCS (Physical Coding Sublayer) Error alarm.\n hiBer(4): high BER(Block Errored Seconds Ratio) alarm.\n localFault(5): Local Fault alarm.\n remoteFault(6): Remote Fault alarm.\n nos(7): NOS (Not-Operational primitive Sequence).\n squelch(8): Squelch alarm."\n ::= { coiFibreChanControllerEntry 4 }', 'syntax_tree': [['BITS', [['noAlarm', 0], ['los', 1], ['syncLoss', 2], ['pcsErr', 3], ['hiBer', 4], ['localFault', 5], ['remoteFault', 6], ['nos', 7], ['squelch', 8]]], None, ['MaxAccessPart', 'read-only'], ['Status', 'current'], ['DESCRIPTION', 'This object indicates the current defect status of the Fibre Channel controller. Valid values are - noAlarm(0): No Alarm. This bit will be set when none of the following defect bits are set. los(1): LOS (Loss Of Signal). This bit will be set when LOS alarm condition is detected on the Fibre Channel Recieve side. syncLoss(2): Sync Loss alarm. pcsErr(3): PCS (Physical Coding Sublayer) Error alarm. hiBer(4): high BER(Block Errored Seconds Ratio) alarm. localFault(5): Local Fault alarm. remoteFault(6): Remote Fault alarm. nos(7): NOS (Not-Operational primitive Sequence). squelch(8): Squelch alarm.'], None, None, None, None], 'source_encoding': 'utf-8-sig'}, 'parser_version': 'mib-4'}