An extension to the IETF BGP4 MIB module defined in
RFC 1657.
Following is the terminology associated with Border
Gateway Protocol(BGP).
UPDATE message
UPDATE messages are used to transfer routing
information between BGP peers. An UPDATE message
is used to advertise a single feasible route to a
peer, or to withdraw multiple unfeasible routes
from service.
Adj-RIBs-In
The Adj-RIBs-In store routing information that has
been learned from inbound UPDATE messages. Their
contents represent routes that are available as an
input to the Decision Process.
Loc-RIB(BGP table)
The Loc-RIB contains the local routing information
that the BGP speaker has selected by applying its
local policies to the routing information contained
in its Adj-RIBs-In.
Adj-RIBs-Out
The Adj-RIBs-Out store the information that the
local BGP speaker has selected for advertisement to
its peers. The routing information stored in the
Adj-RIBs-Out will be carried in the local BGP
speaker's UPDATE messages and advertised to its
peers.
Path Attributes
A variable length sequence of path attributes is
present in every UPDATE. Each path attribute is a
triple
Network Layer Reachability Information(NLRI)
A variable length field present in UPDATE messages
which contains a list of Network Layer address
prefixes.
Address Family Identifier(AFI)
Primary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.
Subsequent Address Family Identifier(SAFI)
Secondary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.
Parsed from file CISCO-BGP4-MIB.mib
Module: CISCO-BGP4-MIB
An extension to the IETF BGP4 MIB module defined in
RFC 1657.
Following is the terminology associated with Border
Gateway Protocol(BGP).
UPDATE message
UPDATE messages are used to transfer routing
information between BGP peers. An UPDATE message
is used to advertise a single feasible route to a
peer, or to withdraw multiple unfeasible routes
from service.
Adj-RIBs-In
The Adj-RIBs-In store routing information that has
been learned from inbound UPDATE messages. Their
contents represent routes that are available as an
input to the Decision Process.
Loc-RIB(BGP table)
The Loc-RIB contains the local routing information
that the BGP speaker has selected by applying its
local policies to the routing information contained
in its Adj-RIBs-In.
Adj-RIBs-Out
The Adj-RIBs-Out store the information that the
local BGP speaker has selected for advertisement to
its peers. The routing information stored in the
Adj-RIBs-Out will be carried in the local BGP
speaker's UPDATE messages and advertised to its
peers.
Path Attributes
A variable length sequence of path attributes is
present in every UPDATE. Each path attribute is a
triple
Network Layer Reachability Information(NLRI)
A variable length field present in UPDATE messages
which contains a list of Network Layer address
prefixes.
Address Family Identifier(AFI)
Primary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.
Subsequent Address Family Identifier(SAFI)
Secondary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.
Parsed from file CISCO-BGP4-MIB.my.txt
Company: None
Module: CISCO-BGP4-MIB
An extension to the IETF BGP4 MIB module defined in
RFC 1657.
Following is the terminology associated with Border
Gateway Protocol(BGP).
UPDATE message
UPDATE messages are used to transfer routing
information between BGP peers. An UPDATE message
is used to advertise a single feasible route to a
peer, or to withdraw multiple unfeasible routes
from service.
Adj-RIBs-In
The Adj-RIBs-In store routing information that has
been learned from inbound UPDATE messages. Their
contents represent routes that are available as an
input to the Decision Process.
Loc-RIB(BGP table)
The Loc-RIB contains the local routing information
that the BGP speaker has selected by applying its
local policies to the routing information contained
in its Adj-RIBs-In.
Adj-RIBs-Out
The Adj-RIBs-Out store the information that the
local BGP speaker has selected for advertisement to
its peers. The routing information stored in the
Adj-RIBs-Out will be carried in the local BGP
speaker's UPDATE messages and advertised to its
peers.
Path Attributes
A variable length sequence of path attributes is
present in every UPDATE. Each path attribute is a
triple
Network Layer Reachability Information(NLRI)
A variable length field present in UPDATE messages
which contains a list of Network Layer address
prefixes.
Address Family Identifier(AFI)
Primary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.
Subsequent Address Family Identifier(SAFI)
Secondary identifier to indicate the type of the
Network Layer Reachability Information(NLRI) being
carried.
ciscoBgp4MIB MODULE-IDENTITY LAST-UPDATED "201009300000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "An extension to the IETF BGP4 MIB module defined in RFC 1657. Following is the terminology associated with Border Gateway Protocol(BGP). UPDATE message UPDATE messages are used to transfer routing information between BGP peers. An UPDATE message is used to advertise a single feasible route to a peer, or to withdraw multiple unfeasible routes from service. Adj-RIBs-In The Adj-RIBs-In store routing information that has been learned from inbound UPDATE messages. Their contents represent routes that are available as an input to the Decision Process. Loc-RIB(BGP table) The Loc-RIB contains the local routing information that the BGP speaker has selected by applying its local policies to the routing information contained in its Adj-RIBs-In. Adj-RIBs-Out The Adj-RIBs-Out store the information that the local BGP speaker has selected for advertisement to its peers. The routing information stored in the Adj-RIBs-Out will be carried in the local BGP speaker's UPDATE messages and advertised to its peers. Path Attributes A variable length sequence of path attributes is present in every UPDATE. Each path attribute is a triple
of variable length. Network Layer Reachability Information(NLRI) A variable length field present in UPDATE messages which contains a list of Network Layer address prefixes. Address Family Identifier(AFI) Primary identifier to indicate the type of the Network Layer Reachability Information(NLRI) being carried. Subsequent Address Family Identifier(SAFI) Secondary identifier to indicate the type of the Network Layer Reachability Information(NLRI) being carried." REVISION "201009300000Z" DESCRIPTION "+Added cbgpNotifsEnable and cbgpLocalAs +Modified CbgpNetworkAddress TC +Added cbgpPeer2Table +Added cbgpPeer2CapsTable +Added cbgpPeer2AddrFamilyTable +Added cbgpPeer2AddrFamilyPrefixTable +Added notification cbgpPeer2EstablishedNotification +Added notification cbgpPeer2BackwardTransNotification +Added notification cbgpPeer2FsmStateChange +Added notification cbgpPeer2BackwardTransition +Added notification cbgpPeer2PrefixThresholdExceeded +Added notification cbgpPeer2PrefixThresholdClear" REVISION "200302240000Z" DESCRIPTION "+Added cbgpPeerCapsTable +Added cbgpPeerAddrFamilyTable +Added cbgpPeerAddrFamilyPrefixTable +Added notification event cbgpBackwardTransition +Added notification event cbgpPrefixThresholdExceeded +Added notification event cbgpPrefixThresholdClear" REVISION "200212190000Z" DESCRIPTION "+Added cbgpPeerPrefixTable +Added notification event cbgpFsmStateChange" REVISION "200108130000Z" DESCRIPTION "Initial version of the MIB module." ::= { ciscoMgmt 187 }
ciscoBgp4MIB OBJECT IDENTIFIER ::= { ciscoMgmt 187 }
Vendor: Cisco
Module: CISCO-BGP4-MIB
[Automatically extracted from oidview.com]
ciscoBgp4MIB MODULE-IDENTITY LAST-UPDATED "201009300000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "An extension to the IETF BGP4 MIB module defined in RFC 1657. Following is the terminology associated with Border Gateway Protocol(BGP). UPDATE message UPDATE messages are used to transfer routing information between BGP peers. An UPDATE message is used to advertise a single feasible route to a peer, or to withdraw multiple unfeasible routes from service. Adj-RIBs-In The Adj-RIBs-In store routing information that has been learned from inbound UPDATE messages. Their contents represent routes that are available as an input to the Decision Process. Loc-RIB(BGP table) The Loc-RIB contains the local routing information that the BGP speaker has selected by applying its local policies to the routing information contained in its Adj-RIBs-In. Adj-RIBs-Out The Adj-RIBs-Out store the information that the local BGP speaker has selected for advertisement to its peers. The routing information stored in the Adj-RIBs-Out will be carried in the local BGP speaker's UPDATE messages and advertised to its peers. Path Attributes A variable length sequence of path attributes is present in every UPDATE. Each path attribute is a triple
of variable length. Network Layer Reachability Information(NLRI) A variable length field present in UPDATE messages which contains a list of Network Layer address prefixes. Address Family Identifier(AFI) Primary identifier to indicate the type of the Network Layer Reachability Information(NLRI) being carried. Subsequent Address Family Identifier(SAFI) Secondary identifier to indicate the type of the Network Layer Reachability Information(NLRI) being carried." REVISION "201009300000Z" DESCRIPTION "+Added cbgpNotifsEnable and cbgpLocalAs +Modified CbgpNetworkAddress TC +Added cbgpPeer2Table +Added cbgpPeer2CapsTable +Added cbgpPeer2AddrFamilyTable +Added cbgpPeer2AddrFamilyPrefixTable +Added notification cbgpPeer2EstablishedNotification +Added notification cbgpPeer2BackwardTransNotification +Added notification cbgpPeer2FsmStateChange +Added notification cbgpPeer2BackwardTransition +Added notification cbgpPeer2PrefixThresholdExceeded +Added notification cbgpPeer2PrefixThresholdClear" REVISION "200302240000Z" DESCRIPTION "+Added cbgpPeerCapsTable +Added cbgpPeerAddrFamilyTable +Added cbgpPeerAddrFamilyPrefixTable +Added notification event cbgpBackwardTransition +Added notification event cbgpPrefixThresholdExceeded +Added notification event cbgpPrefixThresholdClear" REVISION "200212190000Z" DESCRIPTION "+Added cbgpPeerPrefixTable +Added notification event cbgpFsmStateChange" REVISION "200108130000Z" DESCRIPTION "Initial version of the MIB module." ::= { ciscoMgmt 187 }
ciscoBgp4MIB MODULE-IDENTITY LAST-UPDATED "201009300000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "An extension to the IETF BGP4 MIB module defined in RFC 1657. Following is the terminology associated with Border Gateway Protocol(BGP). UPDATE message UPDATE messages are used to transfer routing information between BGP peers. An UPDATE message is used to advertise a single feasible route to a peer, or to withdraw multiple unfeasible routes from service. Adj-RIBs-In The Adj-RIBs-In store routing information that has been learned from inbound UPDATE messages. Their contents represent routes that are available as an input to the Decision Process. Loc-RIB(BGP table) The Loc-RIB contains the local routing information that the BGP speaker has selected by applying its local policies to the routing information contained in its Adj-RIBs-In. Adj-RIBs-Out The Adj-RIBs-Out store the information that the local BGP speaker has selected for advertisement to its peers. The routing information stored in the Adj-RIBs-Out will be carried in the local BGP speaker's UPDATE messages and advertised to its peers. Path Attributes A variable length sequence of path attributes is present in every UPDATE. Each path attribute is a triple
of variable length. Network Layer Reachability Information(NLRI) A variable length field present in UPDATE messages which contains a list of Network Layer address prefixes. Address Family Identifier(AFI) Primary identifier to indicate the type of the Network Layer Reachability Information(NLRI) being carried. Subsequent Address Family Identifier(SAFI) Secondary identifier to indicate the type of the Network Layer Reachability Information(NLRI) being carried." REVISION "201009300000Z" DESCRIPTION "+Added cbgpNotifsEnable and cbgpLocalAs +Modified CbgpNetworkAddress TC +Added cbgpPeer2Table +Added cbgpPeer2CapsTable +Added cbgpPeer2AddrFamilyTable +Added cbgpPeer2AddrFamilyPrefixTable +Added notification cbgpPeer2EstablishedNotification +Added notification cbgpPeer2BackwardTransNotification +Added notification cbgpPeer2FsmStateChange +Added notification cbgpPeer2BackwardTransition +Added notification cbgpPeer2PrefixThresholdExceeded +Added notification cbgpPeer2PrefixThresholdClear" REVISION "200302240000Z" DESCRIPTION "+Added cbgpPeerCapsTable +Added cbgpPeerAddrFamilyTable +Added cbgpPeerAddrFamilyPrefixTable +Added notification event cbgpBackwardTransition +Added notification event cbgpPrefixThresholdExceeded +Added notification event cbgpPrefixThresholdClear" REVISION "200212190000Z" DESCRIPTION "+Added cbgpPeerPrefixTable +Added notification event cbgpFsmStateChange" REVISION "200108130000Z" DESCRIPTION "Initial version of the MIB module." ::= { ciscoMgmt 187 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.187.0 | ciscoBgp4NotifyPrefix | 10 | 10 | None |
1.3.6.1.4.1.9.9.187.1 | ciscoBgp4MIBObjects | 3 | 109 | None |
1.3.6.1.4.1.9.9.187.2 | ciscoBgp4NotificationPrefix | 0 | 0 | None |
1.3.6.1.4.1.9.9.187.3 | ciscoBgp4MIBConformance | 2 | 14 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.137 | ciscoWirelessTextualConventions | 0 | 0 | This module defines textual conventions used in Cisco Wireless MIBs. |
1.3.6.1.4.1.9.9.138 | ciscoEntityAlarmMIB | 3 | 66 | This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the… |
1.3.6.1.4.1.9.9.139 | ciscoEntityProvMIB | 3 | 13 | This MIB module defines the objects that support provisioning of 'container' class physical entities. Provisioning sets up a 'co… |
1.3.6.1.4.1.9.9.140 | ciscoCopsClientMIB | 3 | 43 | This MIB module is for configuration & statistic query of Common Open Policy Service(COPS) client feature on the Cisco device. C… |
1.3.6.1.4.1.9.9.141 | ciscoVSIControllerMIB | 2 | 21 | This MIB module is used for configuring ATM Capable Switch to be aware of VSI Controller information. Terminolgies used: VSI … |
1.3.6.1.4.1.9.9.144 | ciscoTransactionConnectionMIB | 2 | 66 | The MIB module for retrieving Cisco Transaction Connection configuration and status. Cisco Transaction Connection routes transac… |
1.3.6.1.4.1.9.9.145 | ciscoWanModuleMIB | 3 | 32 | The MIB to configure Connection Specific parameters and statistics related information in a Service Module. The Service Module(SM… |
1.3.6.1.4.1.9.9.146 | ciscoCallApplicationMIB | 2 | 548 | This MIB allows management of call applications on a network device. A 'call application' is a software module that processes cal… |
1.3.6.1.4.1.9.9.147 | ciscoFirewallMIB | 3 | 75 | MIB module for monitoring Cisco Firewalls. |
1.3.6.1.4.1.9.9.148 | ciscoBgpPolAcctMIB | 2 | 15 | BGP policy based accounting information |
1.3.6.1.4.1.9.9.149 | ciscoAdslLineCapMIB | 3 | 46 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
1.3.6.1.4.1.9.9.150 | ciscoAAASessionMIB | 3 | 31 | This MIB module provides data for accounting sessions based on Authentication, Authorization, Accounting (AAA) protocols. Referenc… |
1.3.6.1.4.1.9.9.151 | ciscoL2L3IfConfigMIB | 2 | 11 | Interface switchport mode configuration management MIB. This MIB is used to monitor and control configuration of interface switch… |
1.3.6.1.4.1.9.9.152 | ciscoSipUaMIB | 4 | 504 | Cisco User Agent Session Initiation Protocol (SIP) MIB module. SIP is an application-layer signalling protocol for creating, mod… |
1.3.6.1.4.1.9.9.154 | ciscoIdslLineMIB | 3 | 148 | This MIB module describes IDSL (ISDN Digital Line Subscriber) line interfaces. The structure of this module resembles that of th… |
1.3.6.1.4.1.9.9.155 | ciscoSdslLineMIB | 3 | 170 | This MIB module describes all variations of the symmetric DSL line interfaces. The structure of this module resembles and mainta… |
1.3.6.1.4.1.9.9.156 | ciscoCcmMIB | 3 | 487 | The MIB Module for the management of a Cisco Unified Communications Manager (CUCM) application running with a Cisco Communication… |
1.3.6.1.4.1.9.9.157 | ciscoCdmaPdsnMIB | 3 | 984 | This MIB is to support the CDMA PDSN (Packet Data Serving Node) feature. A CDMA2000 network supports wireless data communication… |
1.3.6.1.4.1.9.9.158 | ciscoAAAClientMIB | 3 | 25 | This MIB module provides data for authentication method priority based on Authentication, Authorization, Accounting (AAA) protoco… |
1.3.6.1.4.1.9.9.159 | ciscoQosPolicyConfigMIB | 3 | 35 | This MIB module defines managed objects that support the policy source configuration of Quality of Service (QoS) on the device. T… |
1.3.6.1.4.1.9.9.160 | ciscoCircuitInterfaceMIB | 2 | 11 | The MIB module to configure the circuit description for an interface. The circuit description can be used to describe and identify… |
1.3.6.1.4.1.9.9.161 | ciscoSlbMIB | 3 | 279 | The MIB for managing Server Load Balancing Manager(s), such as the Cisco IOS SLB product. This MIB includes instrumentation for t… |
1.3.6.1.4.1.9.9.162 | ciscoVsiMasterMIB | 3 | 100 | This MIB module contains objects related to the master side of the Virtual Switch Interface protocol used for control of ATM swit… |
1.3.6.1.4.1.9.9.163 | ciscoCallTrackerMIB | 3 | 104 | CISCO-CALL-TRACKER-MIB |
1.3.6.1.4.1.9.9.164 | ciscoCallTrackerTCPMIB | 3 | 25 | This MIB module provides TCP service connection related data for tracking the progress and status of a call. This module extends t… |
1.3.6.1.4.1.9.9.165 | ciscoCallTrackerModemMIB | 3 | 97 | This MIB module provides modem call related data for tracking the progress and status of a call. This module extends tables defin… |
1.3.6.1.4.1.9.9.166 | ciscoCBQosMIB | 2 | 544 | Cisco Class-Based QoS MIB ********************************** Overview ********************************** This MIB provides read acc… |
1.3.6.1.4.1.9.9.167 | ciscoWirelessDocsIfMib | 3 | 140 | This is the MIB Module for MCNS compliant Radio Frequency (RF) interfaces in wireless point-to-multipoint subscriber units (SU) a… |
1.3.6.1.4.1.9.9.168 | ciscoNtpMIB | 3 | 87 | This MIB module defines a MIB which provides mechanisms to monitor an NTP server. The MIB is derived from the Technical Report #Ma… |
1.3.6.1.4.1.9.9.169 | ciscoWirelessDocsExtMIB | 3 | 99 | This MIB module defines Cisco-specific objects that add to the functionality defined in CISCO-WIRELESS-DOCS-IF-MIB. These objects … |
1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | 2 | 112 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface. |
1.3.6.1.4.1.9.9.171 | ciscoIpSecFlowMonitorMIB | 3 | 507 | This is a MIB Module for monitoring the structures in IPSec-based Virtual Private Networks. The MIB has been designed to be adopt… |
1.3.6.1.4.1.9.9.172 | ciscoIpSecPolMapMIB | 3 | 21 | The MIB module maps the IPSec entities created dynamically to the policy entities that caused them. This is an appendix to the IPS… |
1.3.6.1.4.1.9.9.173 | ciscoPrivateVlanMIB | 2 | 56 | The MIB module to support Private VLAN feature on Cisco's switching devices. |
1.3.6.1.4.1.9.9.174 | ciscoMobileIpMIB | 3 | 533 | An extension to the IETF MIB module defined in RFC-2006 for managing Mobile IP implementations. Mobile IP introduces the followin… |
1.3.6.1.4.1.9.9.175 | ciscoIfLinkConfigMIB | 2 | 15 | The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interf… |
1.3.6.1.4.1.9.9.176 | ciscoRFMIB | 3 | 117 | This MIB provides configuration control and status for the Redundancy Framework (RF) subsystem. RF provides a mechanism for logic… |
1.3.6.1.4.1.9.9.177 | ciscoSaaApmMIB | 3 | 38 | Acronyms and Terms: SAA - Service Assurance Agent APM - Application Performance Monitoring A MIB for controlling SAA APM. APM provi… |
1.3.6.1.4.1.9.9.178 | ciscoContentEngineMIB | 3 | 263 | The MIB module for the Cisco Content Engine from Cisco Systems, Inc. |
1.3.6.1.4.1.9.9.179 | ciscoCatOSAclQosMIB | 3 | 470 | This MIB module is for Access Control Lists(ACLs) configuration of Quality of Service (QoS) as well as Security feature on the Ci… |
1.3.6.1.4.1.9.9.180 | ciscoWirelessRfMetricsMIB | 5 | 99 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface specification. |
1.3.6.1.4.1.9.9.181 | ciscoWirelessLinkMetricsMIB | 4 | 141 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface link metrics specification. Glossary The followin… |
1.3.6.1.4.1.9.9.183 | ciscoGprsAccPtMIB | 3 | 338 | This MIB module supports access point configuration for GGSN in a GPRS system. GPRS [1] is a GSM network providing mobile wireles… |
1.3.6.1.4.1.9.9.184 | ciscoPimMIB | 3 | 36 | This MIB module defines the cisco specific variables for Protocol Independent Multicast (PIM) management. These definitions are a… |
1.3.6.1.4.1.9.9.185 | ciscoBertMIB | 2 | 46 | The MIB module to configure and perform Bit Error Rate Testing (BERT) on DS3, DS1/E1 and DS0/DS0Bundle interfaces. Bit error rate… |
1.3.6.1.4.1.9.9.188 | cGtpMIB | 3 | 248 | This MIB module manages the GPRS Tunnelling Protocol (GTP) on GGSN and SGSN. GPRS provides wireless access to packet data network… |
1.3.6.1.4.1.9.9.189 | ciscoPortQosMIB | 3 | 114 | Cisco PORT QOS MIB - Overview This MIB module is for the management of Cisco's per port rate-limiting and traffic shaping on L3 sw… |
1.3.6.1.4.1.9.9.190 | ciscoVoiceAppsMIB | 3 | 40 | The MIB Module for the management of Cisco Voice Applications. This MIB is designed to work in conjunction with the SYSAPPL-MIB … |
1.3.6.1.4.1.9.9.191 | ciscoIpUplinkRedirectMIB | 3 | 11 | This MIB module is for the configuration of Cisco IP Uplink Redirect feature. |
1.3.6.1.4.1.9.9.192 | ciscoGprsChargingMIB | 3 | 315 | This MIB module manages the charging related function on the GGSN node of a GPRS system. The following diagram illustrates a simp… |
1.3.6.1.4.1.9.9.194 | ciscoPppoeMIB | 3 | 89 | Cisco PPPoE sessions management MIB Module. |
1.3.6.1.4.1.9.9.195 | ciscoEntityExtMIB | 3 | 64 | This MIB is an extension of the ENTITY-MIB specified in RFC2737. This MIB module contains Cisco-defined extensions to the entit… |
1.3.6.1.4.1.9.9.197 | ciscoDistDirMIB | 3 | 123 | Cisco Distributed Director MIB. The Cisco Distributed Director provides global Internet scalability and increased performance as … |
1.3.6.1.4.1.9.9.198 | ciscoRfSupMIB | 3 | 58 | This MIB was designed to complement the CISCO-RF-MIB by providing additional optional status and configuration control for redund… |
1.3.6.1.4.1.9.9.199 | ciscoSmFileDownloadMIB | 3 | 23 | The MIB module for downloading files to the Service Modules specifically designed for an architecture containing a controller car… |
1.3.6.1.4.1.9.9.201 | ciscoSwitchUsageMIB | 3 | 15 | This MIB defines objects related to statistics for the usage of switch fabric. The switch fabric is used by the incoming packets … |
1.3.6.1.4.1.9.9.202 | ciscoOscpMIB | 3 | 52 | The MIB module for managing the Cisco Optical Supervisory Channel Protocol (OSCP). The OSCP is used to determine and maintain wav… |
1.3.6.1.4.1.9.9.204 | ciscoXdslLineMIB | 2 | 32 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to different t… |
1.3.6.1.4.1.9.9.215 | ciscoMacNotificationMIB | 3 | 72 | This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring device… |
1.3.6.1.4.1.9.9.216 | ciscoContentNetworkMIB | 3 | 34 | This MIB module defines objects for Content Network devices. A Content Network is a collection of devices that optimizes the deli… |
1.3.6.1.4.1.9.9.217 | ciscoCat6kCrossbarMIB | 3 | 210 | The Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, … |
1.3.6.1.4.1.9.9.218 | ciscoIfThresholdMIB | 3 | 65 | ciscoIfthresholdMIB |
1.3.6.1.4.1.9.9.219 | ciscoVoiceDnisMIB | 3 | 24 | The MIB module provides management support for Dialer Number Information Service (DNIS) mapping. A DNIS entry is associated with… |
1.3.6.1.4.1.9.9.220 | ciscoPaeMIB | 3 | 231 | Cisco Port Access Entity (PAE) module for managing IEEE Std 802.1x. This MIB provides Port Access Entity information that are eith… |
1.3.6.1.4.1.9.9.221 | ciscoEnhancedMemPoolMIB | 3 | 87 | New MIB module for monitoring the memory pools of all physical entities on a managed system. |
1.3.6.1.4.1.9.9.222 | ciscoEnhancedWredMIB | 3 | 70 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop (WRED) is a method which avoids traffic congestion on an outp… |
1.3.6.1.4.1.9.9.223 | ciscoWanNcdpMIB | 3 | 58 | This MIB module is intended for the management of network clock distribution and the Network Clock Distribution Protocol (NCDP) i… |
1.3.6.1.4.1.9.9.224 | ciscoDevExcepReportMIB | 3 | 29 | This mib defines the SNMP objects to report exceptions to north-bound NMS. The devices implementing this MIB monitor the status of… |
1.3.6.1.4.1.9.9.225 | ciscoLagMIB | 3 | 56 | Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either exclud… |
1.3.6.1.4.1.9.9.226 | ciscoNDEMIB | 4 | 17 | The Netflow Data Export (NDE) MIB provides instrumentation for configuration and operation of the Netflow Data Export feature. A … |
1.3.6.1.4.1.9.9.227 | ciscoItpAclMIB | 3 | 45 | The MIB for managing access lists that control messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Trans… |
1.3.6.1.4.1.9.9.228 | ciscoItpRtMIB | 3 | 47 | This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco … |
1.3.6.1.4.1.9.9.229 | ciscoDs1ExtMIB | 2 | 129 | The MIB module to describe DS1/E1 interface objects. This is an extension to the standard DS1/E1 MIB (RFC 2495). Unless mentioned… |
1.3.6.1.4.1.9.9.230 | ciscoItpActMIB | 3 | 29 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This… |
1.3.6.1.4.1.9.9.231 | ciscoItpTextualConventions | 0 | 0 | The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this… |
1.3.6.1.4.1.9.9.232 | ciscoItpSpMIB | 3 | 384 | The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Ci… |
1.3.6.1.4.1.9.9.233 | ciscoItpSccpMIB | 3 | 194 | The MIB for Signaling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP … |
1.3.6.1.4.1.9.9.234 | ciscoWanTopologyMIB | 3 | 83 | A management station can use this MIB module for the maintenance of persistent topology information of the PNNI network. Previous… |
1.3.6.1.4.1.9.9.235 | ciscoImaMIB | 2 | 60 | The MIB module describes Cisco IMA objects. This is an extension to the standard of ATM Forum IMA version 1.1, AF-PHY-0086.001 Spe… |
1.3.6.1.4.1.9.9.236 | ciscoWanSctMgmtMIB | 2 | 18 | MIB module to manage SCT files in a node. SCTs (Service Class Templates) are nodal configuration files, which define the traffic … |
1.3.6.1.4.1.9.9.237 | ciscoNmsApplHealthMIB | 3 | 21 | This MIB defines Cisco NMS Application (cna) Health Status Notifications and the related objects. These notifications will be sen… |
... |