Reference record for OID 1.3.6.1.4.1.9.9.394.1.1.1

parent

1.3.6.1.4.1.9.9.394.1.1 (citapStreamEncodePacket)

node code

1

node name

citapStreamCapabilities

dot oid

1.3.6.1.4.1.9.9.394.1.1.1

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoIpTapMIB(394) ciscoIpTapMIBObjects(1) citapStreamEncodePacket(1) citapStreamCapabilities(1)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoIpTapMIB(394) ciscoIpTapMIBObjects(1) citapStreamEncodePacket(1) citapStreamCapabilities(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoIpTapMIB(394) ciscoIpTapMIBObjects(1) citapStreamEncodePacket(1) citapStreamCapabilities(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoIpTapMIB(394) ciscoIpTapMIBObjects(1) citapStreamEncodePacket(1) citapStreamCapabilities(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoIpTapMIB(394) ciscoIpTapMIBObjects(1) citapStreamEncodePacket(1) citapStreamCapabilities(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoIpTapMIB(394) ciscoIpTapMIBObjects(1) citapStreamEncodePacket(1) citapStreamCapabilities(1)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoIpTapMIB/ciscoIpTapMIBObjects/citapStreamEncodePacket/citapStreamCapabilities

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoIpTapMIB/ciscoIpTapMIBObjects/citapStreamEncodePacket/citapStreamCapabilities

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoIpTapMIB/ciscoIpTapMIBObjects/citapStreamEncodePacket/citapStreamCapabilities

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoIpTapMIB/ciscoIpTapMIBObjects/citapStreamEncodePacket/citapStreamCapabilities

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoIpTapMIB/ciscoIpTapMIBObjects/citapStreamEncodePacket/citapStreamCapabilities

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoIpTapMIB/ciscoIpTapMIBObjects/citapStreamEncodePacket/citapStreamCapabilities

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/394/1/1/1

Description by cisco_v1

This object displays what types of intercept streams can be
configured on this type of device. This may be dependent on
hardware capabilities, software capabilities. The following
fields may be supported:
tapEnable: set if table entries with
cTap2StreamInterceptEnable set to 'false'
are used to pre-screen packets for intercept;
otherwise these entries are ignored.
interface: SNMP ifIndex Value may be used to select
interception of all data crossing an
interface or set of interfaces.
ipV4: IPv4 Address or prefix may be used to select
traffic to be intercepted.
ipV6: IPv6 Address or prefix may be used to select
traffic to be intercepted.
l4Port: TCP/UDP Ports may be used to select traffic
to be intercepted.
dscp: DSCP (Differentiated Services Code Point) may
be used to select traffic to be intercepted.
voip: packets belonging to a voice session may
be intercepted using source IPv4 address and
source UDP port.

Description by mibdepot

This object displays what types of intercept streams can be
configured on this type of device. This may be dependent on
hardware capabilities, software capabilities. The following
fields may be supported:
tapEnable: set if table entries with
cTap2StreamInterceptEnable set to 'false'
are used to pre-screen packets for intercept;
otherwise these entries are ignored.
interface: SNMP ifIndex Value may be used to select
interception of all data crossing an
interface or set of interfaces.
ipV4: IPv4 Address or prefix may be used to select
traffic to be intercepted.
ipV6: IPv6 Address or prefix may be used to select
traffic to be intercepted.
l4Port: TCP/UDP Ports may be used to select traffic
to be intercepted.
dscp: DSCP (Differentiated Services Code Point) may
be used to select traffic to be intercepted.
voip: packets belonging to a voice session may
be intercepted using source IPv4 address and
source UDP port.

Parsed from file CISCO-IP-TAP-MIB.my.txt
Company: None
Module: CISCO-IP-TAP-MIB

Description by circitor

This object displays what types of intercept streams can be
configured on this type of device. This may be dependent on
hardware capabilities, software capabilities. The following
fields may be supported:
tapEnable: set if table entries with
cTap2StreamInterceptEnable set to 'false'
are used to pre-screen packets for intercept;
otherwise these entries are ignored.
interface: SNMP ifIndex Value may be used to select
interception of all data crossing an
interface or set of interfaces.
ipV4: IPv4 Address or prefix may be used to select
traffic to be intercepted.
ipV6: IPv6 Address or prefix may be used to select
traffic to be intercepted.
l4Port: TCP/UDP Ports may be used to select traffic
to be intercepted.
dscp: DSCP (Differentiated Services Code Point) may
be used to select traffic to be intercepted.
voip: packets belonging to a voice session may
be intercepted using source IPv4 address and
source UDP port.

Parsed from file CISCO-IP-TAP-MIB.mib
Module: CISCO-IP-TAP-MIB

Information by cisco_v1

citapStreamCapabilities OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..2))
        
        
        
        
        
        
        
        
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object displays what types of intercept streams can be
        configured on this type of device. This may be dependent on
        hardware capabilities, software capabilities. The following
        fields may be supported:
            tapEnable:   set if table entries with
                         cTap2StreamInterceptEnable set to 'false'
                         are used to pre-screen packets for intercept;
                         otherwise these entries are ignored.
            interface:   SNMP ifIndex Value may be used to select
                         interception of all data crossing an
                         interface or set of interfaces.
            ipV4:        IPv4 Address or prefix may be used to select
                         traffic to be intercepted.
            ipV6:        IPv6 Address or prefix may be used to select
                         traffic to be intercepted.
            l4Port:      TCP/UDP Ports may be used to select traffic
                         to be intercepted.
            dscp:        DSCP (Differentiated Services Code Point) may
                         be used to select traffic to be intercepted.
            voip:        packets belonging to a voice session may
                         be intercepted using source IPv4 address and
                         source UDP port."
    ::= { citapStreamEncodePacket 1 }

Information by oid_info

Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.

Information by mibdepot

citapStreamCapabilities  OBJECT-TYPE
     SYNTAX     BITS {
                         tapEnable(0),
                         interface(1),
                         ipV4(2),
                         ipV6(3),
                         l4Port(4),
                         dscp(5),
                         voip(6)
                     }
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "This object displays what types of intercept streams can be
         configured on this type of device. This may be dependent on
         hardware capabilities, software capabilities. The following
         fields may be supported:
             tapEnable:   set if table entries with
                          cTap2StreamInterceptEnable set to 'false'
                          are used to pre-screen packets for intercept;
                          otherwise these entries are ignored.
             interface:   SNMP ifIndex Value may be used to select
                          interception of all data crossing an
                          interface or set of interfaces.
             ipV4:        IPv4 Address or prefix may be used to select
                          traffic to be intercepted.
             ipV6:        IPv6 Address or prefix may be used to select
                          traffic to be intercepted.
             l4Port:      TCP/UDP Ports may be used to select traffic
                          to be intercepted.
             dscp:        DSCP (Differentiated Services Code Point) may
                          be used to select traffic to be intercepted.
             voip:        packets belonging to a voice session may
                          be intercepted using source IPv4 address and
                          source UDP port."
     ::= { citapStreamEncodePacket 1 }

Information by circitor

citapStreamCapabilities  OBJECT-TYPE
     SYNTAX     BITS {
                         tapEnable(0),
                         interface(1),
                         ipV4(2),
                         ipV6(3),
                         l4Port(4),
                         dscp(5),
                         voip(6)
                     }
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "This object displays what types of intercept streams can be
         configured on this type of device. This may be dependent on
         hardware capabilities, software capabilities. The following
         fields may be supported:
             tapEnable:   set if table entries with
                          cTap2StreamInterceptEnable set to 'false'
                          are used to pre-screen packets for intercept;
                          otherwise these entries are ignored.
             interface:   SNMP ifIndex Value may be used to select
                          interception of all data crossing an
                          interface or set of interfaces.
             ipV4:        IPv4 Address or prefix may be used to select
                          traffic to be intercepted.
             ipV6:        IPv6 Address or prefix may be used to select
                          traffic to be intercepted.
             l4Port:      TCP/UDP Ports may be used to select traffic
                          to be intercepted.
             dscp:        DSCP (Differentiated Services Code Point) may
                          be used to select traffic to be intercepted.
             voip:        packets belonging to a voice session may
                          be intercepted using source IPv4 address and
                          source UDP port."
     ::= { citapStreamEncodePacket 1 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (1)

Brothers (1)