OID reference

rttMonCtrlAdminStatus

1.3.6.1.4.1.9.9.42.1.2.1.1.9

Description

The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType Additionally: - for echo, pathEcho based on 'ipIcmpEcho' and dlsw probes rttMonEchoAdminProtocol and rttMonEchoAdminTargetAddress; - for echo, pathEcho based on '…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.9.9.42.1.2.1.1 (rttMonCtrlAdminEntry)
Node code
9
Node name
rttMonCtrlAdminStatus
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.9.9.42.1.2.1.1.9
URN notation
urn:oid:1.3.6.1.4.1.9.9.42.1.2.1.1.9
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 9 9 42 1 2 1 1 9}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) me1200(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) me1200(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) me1200(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) me1200(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) me1200(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) me1200(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) me1200(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) me1200(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMonCtrlAdminTable(1) rttMonCtrlAdminEntry(1) rttMonCtrlAdminStatus(9)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/9/9/42/1/2/1/1/9
  • /ISO/Identified-Organization/6/1/4/1/9/9/42/1/2/1/1/9
  • /ISO/3/6/1/4/1/9/9/42/1/2/1/1/9
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/enterprise/me1200/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/enterprise/Cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/enterprises/me1200/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/enterprises/Cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/me1200/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/Cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/me1200/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/Cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/org/dod/internet/private/enterprise/me1200/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/org/dod/internet/private/enterprise/Cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMonCtrlAdminTable/rttMonCtrlAdminEntry/rttMonCtrlAdminStatus
  • Additional combinations skipped.

SNMP properties

Value type
RowStatus
Maximum access defined by MIB
read-write, read-create
Status in MIB
mandatory, current
Default value
createAndGo

Definitions may combine these properties differently.

Compare 3 source variants

Variant 1 — Cisco SMIv1, MIBdepot

Value type
RowStatus
Maximum access defined by MIB
read-write
Status in MIB
mandatory

Variant 2 — MIBdepot

Value type
RowStatus
Maximum access defined by MIB
read-write
Status in MIB
mandatory
Default value
createAndGo

Variant 3 — Cisco, MIBdepot, and others

Value type
RowStatus
Maximum access defined by MIB
read-create
Status in MIB
current

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 3 distinct definitions; some records may not include a definition.

Show 3 published definitions

rttMonCtrlAdminStatus · mandatory

rttMonCtrlAdminStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the conceptual RTT control row. 
        
        In order for this object to become active, the following 
        row objects must be defined:  
        - rttMonCtrlAdminRttType
        Additionally:
         - for echo, pathEcho and dlsw probes
            rttMonEchoAdminProtocol and 
            rttMonEchoAdminTargetAddress;
         - for udpEcho, tcpConnect and jitter probes
            rttMonEchoAdminTargetAddress and
        rttMonEchoAdminTargetPort
         - for http probe
            rttMonEchoAdminURL 
         - for dns probe
            rttMonEchoAdminTargetAddressString 
            rttMonEchoAdminNameServer 
         - dhcp probe doesn't require any additional objects
        
        All other objects can assume default values. The 
        conceptual Rtt control row will be placed into a 
        'pending' state (via the rttMonCtrlOperState object)
        if rttMonScheduleAdminRttStartTime is not specified.
        
        Most conceptual Rtt control row objects cannot be 
        modified once this conceptual Rtt control row has been 
        created.  The objects that can change are the following:
        
         - Objects in the rttMonReactAdminTable can be modified
           as needed without setting this object to 
           'notInService'.
         - Objects in the rttMonScheduleAdminTable can be 
           modified only when this object has the value of
           'notInService'.
         - The rttMonCtrlOperState can be modified to control
           the state of the probe.
        
        Once this object is in 'active' status, it cannot be 
        set to 'notInService' while the rttMonCtrlOperState
        is in 'active' state.  Thus the rttMonCtrlOperState 
        object must be transitioned first. 
        
        This object can be set to 'destroy' from any value
        at any time."
    ::= { rttMonCtrlAdminEntry 9 }

rttMonCtrlAdminStatus · mandatory

rttMonCtrlAdminStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the conceptual RTT control row. 
        
        In order for this object to become active, the following 
        row objects must be defined:  
        - rttMonCtrlAdminRttType
        Additionally:
         - for echo, pathEcho and dlsw probes
            rttMonEchoAdminProtocol and 
            rttMonEchoAdminTargetAddress;
         - for udpEcho, tcpConnect and jitter probes
            rttMonEchoAdminTargetAddress and
        rttMonEchoAdminTargetPort
         - for http probe
            rttMonEchoAdminURL 
         - for dns probe
            rttMonEchoAdminTargetAddressString 
            rttMonEchoAdminNameServer 
         - dhcp probe doesn't require any additional objects
        
        All other objects can assume default values. The 
        conceptual Rtt control row will be placed into a 
        'pending' state (via the rttMonCtrlOperState object)
        if rttMonScheduleAdminRttStartTime is not specified.
        
        Most conceptual Rtt control row objects cannot be 
        modified once this conceptual Rtt control row has been 
        created.  The objects that can change are the following:
        
         - Objects in the rttMonReactAdminTable can be modified
           as needed without setting this object to 
           'notInService'.
         - Objects in the rttMonScheduleAdminTable can be 
           modified only when this object has the value of
           'notInService'.
         - The rttMonCtrlOperState can be modified to control
           the state of the probe.
        
        Once this object is in 'active' status, it cannot be 
        set to 'notInService' while the rttMonCtrlOperState
        is in 'active' state.  Thus the rttMonCtrlOperState 
        object must be transitioned first. 
        
        This object can be set to 'destroy' from any value
        at any time."
    ::= { rttMonCtrlAdminEntry 9 }

rttMonCtrlAdminStatus · mandatory

rttMonCtrlAdminStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the conceptual RTT control row. 
        
        In order for this object to become active, the following 
        row objects must be defined:  
         - rttMonCtrlAdminRttType; 
         - when rttMonCtrlAdminRttType is 'echo' or 'pathEcho',
            rttMonEchoAdminProtocol and 
            rttMonEchoAdminTargetAddress;
         - when rttMonCtrlAdminRttType is 'fileIO',
            rttMonFileIOAdminFilePath;  
         - when rttMonCtrlAdminRttType is 'script', 
           rttMonScriptAdminName. 
        All other objects can assume default values.  A default
        conceptual Rtt control row will be placed into a 
        'pending' state (via the rttMonCtrlOperState object).
        
        Most conceptual Rtt control row objects cannot be 
        modified once this conceptual Rtt control row has been 
        created.  The objects that can change are the following:
        
         - Objects in the rttMonReactAdminTable can be modified
           as needed without setting this object to 
           'notInService'.
         - Objects in the rttMonScheduleAdminTable can be 
           modified only when this object has the value of
           'notInService'.
         - The rttMonCtrlOperState can be modified to control
           the state of the probe.
        
        Once this object is in 'active' status, it cannot be 
        set to 'notInService' while the rttMonCtrlOperState
        is in 'active' state.  Thus the rttMonCtrlOperState 
        object must be transitioned first. 
        
        This object can be set to 'destroy' from any value
        at any time.
        
        NOTE:  In order for all objects in a PDU to be set
               at the same time, this object can only be 
               part of a multi-bound PDU, when its value is
               either createAndGo or createAndWait.  All 
               other values need to be placed inside 
               singular bound PDU's."
    DEFVAL { createAndGo }
    ::= { rttMonCtrlAdminEntry 9 }

Meaning

Descriptions

4 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType Additionally: - for echo, pathEcho and dlsw probes rttMonEchoAdminProtocol and rttMonEchoAdminTargetAddress; - for udpEcho, tcpConnect and jitter probes rttMonEchoAdminTargetAddress and rttMonEchoAdminTargetPort - for http probe rttMonEchoAdminURL - for dns probe rttMonEchoAdminTargetAddressString rttMonEchoAdminNameServer - dhcp probe doesn require any additional objects All other objects can assume default values. The conceptual Rtt control row will be placed into a pending state (via the rttMonCtrlOperState object) if rttMonScheduleAdminRttStartTime is not specified. Most conceptual Rtt control row objects cannot be modified once this conceptual Rtt control row has been created. The objects that can change are the following: - Objects in the rttMonReactAdminTable can be modified as needed without setting this object to otInService. - Objects in the rttMonScheduleAdminTable can be modified only when this object has the value of otInService. - The rttMonCtrlOperState can be modified to control the state of the probe. Once this object is in active status, it cannot be set to otInService while the rttMonCtrlOperState is in active state. Thus the rttMonCtrlOperState object must be transitioned first. This object can be set to destroy from any value at any time.
Original text from OID Repository
rttMonCtrlAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual RTT control row.

In order for this object to become active, the following
row objects must be defined:
- rttMonCtrlAdminRttType
Additionally:
- for echo, pathEcho and dlsw probes
rttMonEchoAdminProtocol and
rttMonEchoAdminTargetAddress;
- for udpEcho, tcpConnect and jitter probes
rttMonEchoAdminTargetAddress and
rttMonEchoAdminTargetPort
- for http probe
rttMonEchoAdminURL
- for dns probe
rttMonEchoAdminTargetAddressString
rttMonEchoAdminNameServer
- dhcp probe doesn require any additional objects
All other objects can assume default values. The
conceptual Rtt control row will be placed into a
pending state (via the rttMonCtrlOperState object)
if rttMonScheduleAdminRttStartTime is not specified.
Most conceptual Rtt control row objects cannot be
modified once this conceptual Rtt control row has been
created. The objects that can change are the following:
- Objects in the rttMonReactAdminTable can be modified
as needed without setting this object to

otInService.
- Objects in the rttMonScheduleAdminTable can be
modified only when this object has the value of

otInService.
- The rttMonCtrlOperState can be modified to control
the state of the probe.

Once this object is in active status, it cannot be
set to
otInService while the rttMonCtrlOperState
is in active state. Thus the rttMonCtrlOperState
object must be transitioned first.
This object can be set to destroy from any value
at any time."
Sources for this description

OID Repository

View at oid-base.com
Automatically extracted from Cisco "SNMP v2 MIBs".

Description 2

The status of the conceptual RTT control row.

In order for this object to become active, the following
row objects must be defined:
- rttMonCtrlAdminRttType
Additionally:
- for echo, pathEcho based on 'ipIcmpEcho' and dlsw probes
rttMonEchoAdminProtocol and
rttMonEchoAdminTargetAddress;
- for echo, pathEcho based on 'mplsLspPingAppl'
rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress
and rttMonEchoAdminLSPFECType
- for udpEcho, tcpConnect and jitter probes
rttMonEchoAdminTargetAddress and
rttMonEchoAdminTargetPort
- for http and ftp probe
rttMonEchoAdminURL
- for dns probe
rttMonEchoAdminTargetAddressString
rttMonEchoAdminNameServer
- dhcp probe doesn't require any additional objects

All other objects can assume default values. The
conceptual Rtt control row will be placed into a
'pending' state (via the rttMonCtrlOperState object)
if rttMonScheduleAdminRttStartTime is not specified.

Most conceptual Rtt control row objects cannot be
modified once this conceptual Rtt control row has been
created. The objects that can change are the following:

- Objects in the rttMonReactAdminTable can be modified
as needed without setting this object to
'notInService'.
- Objects in the rttMonScheduleAdminTable can be
modified only when this object has the value of
'notInService'.
- The rttMonCtrlOperState can be modified to control
the state of the probe.

Once this object is in 'active' status, it cannot be
set to 'notInService' while the rttMonCtrlOperState
is in 'active' state. Thus the rttMonCtrlOperState
object must be transitioned first.

This object can be set to 'destroy' from any value
at any time.
Sources for this description

Circitor

Parsed from CISCO-RTTMON-MIB.mib · CISCO-RTTMON-MIB

Source file: Download CISCO-RTTMON-MIB.mib

Cisco

Source file: Download CISCO-RTTMON-MIB.my · Publisher's file

Source file: Download CISCO-RTTMON-MIB · Publisher's file

Vendor MIB copy from the LibreNMS archive. Cisco support.

Related source files and packages:

Description 3

The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType Additionally: - for echo, pathEcho and dlsw probes rttMonEchoAdminProtocol and rttMonEchoAdminTargetAddress; - for udpEcho, tcpConnect and jitter probes rttMonEchoAdminTargetAddress and rttMonEchoAdminTargetPort - for http probe rttMonEchoAdminURL - for dns probe rttMonEchoAdminTargetAddressString rttMonEchoAdminNameServer - dhcp probe doesn't require any additional objects All other objects can assume default values. The conceptual Rtt control row will be placed into a 'pending' state (via the rttMonCtrlOperState object) if rttMonScheduleAdminRttStartTime is not specified. Most conceptual Rtt control row objects cannot be modified once this conceptual Rtt control row has been created. The objects that can change are the following: - Objects in the rttMonReactAdminTable can be modified as needed without setting this object to 'notInService'. - Objects in the rttMonScheduleAdminTable can be modified only when this object has the value of 'notInService'. - The rttMonCtrlOperState can be modified to control the state of the probe. Once this object is in 'active' status, it cannot be set to 'notInService' while the rttMonCtrlOperState is in 'active' state. Thus the rttMonCtrlOperState object must be transitioned first. This object can be set to 'destroy' from any value at any time.

Sources for this description

Cisco SMIv1MIBdepot

See 1 matching source record

Description 4

The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType; - when rttMonCtrlAdminRttType is 'echo' or 'pathEcho', rttMonEchoAdminProtocol and rttMonEchoAdminTargetAddress; - when rttMonCtrlAdminRttType is 'fileIO', rttMonFileIOAdminFilePath; - when rttMonCtrlAdminRttType is 'script', rttMonScriptAdminName. All other objects can assume default values. A default conceptual Rtt control row will be placed into a 'pending' state (via the rttMonCtrlOperState object). Most conceptual Rtt control row objects cannot be modified once this conceptual Rtt control row has been created. The objects that can change are the following: - Objects in the rttMonReactAdminTable can be modified as needed without setting this object to 'notInService'. - Objects in the rttMonScheduleAdminTable can be modified only when this object has the value of 'notInService'. - The rttMonCtrlOperState can be modified to control the state of the probe. Once this object is in 'active' status, it cannot be set to 'notInService' while the rttMonCtrlOperState is in 'active' state. Thus the rttMonCtrlOperState object must be transitioned first. This object can be set to 'destroy' from any value at any time. NOTE: In order for all objects in a PDU to be set at the same time, this object can only be part of a multi-bound PDU, when its value is either createAndGo or createAndWait. All other values need to be placed inside singular bound PDU's.

Sources for this description

MIBdepot

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; representative source files are shown for each definition.

Records for description 3Cisco SMIv1, MIBdepot1 record · 2 sources

Description 3

rttMonCtrlAdminStatus · mandatoryCisco SMIv1, MIBdepot2 sources

Status in source: mandatory.

Names: rttMonCtrlAdminStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rttMonCtrlAdminStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "RowStatus",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType Additionally: - for echo, pathEcho and dlsw probes rttMonEchoAdminProtocol and rttMonEchoAdminTargetAddress; - for udpEcho, tcpConnect and jitter probes rttMonEchoAdminTargetAddress and rttMonEchoAdminTargetPort - for http probe rttMonEchoAdminURL - for dns probe rttMonEchoAdminTargetAddressString rttMonEchoAdminNameServer - dhcp probe doesn't require any additional objects All other objects can assume default values. The conceptual Rtt control row will be placed into a 'pending' state (via the rttMonCtrlOperState object) if rttMonScheduleAdminRttStartTime is not specified. Most conceptual Rtt control row objects cannot be modified once this conceptual Rtt control row has been created. The objects that can change are the following: - Objects in the rttMonReactAdminTable can be modified as needed without setting this object to 'notInService'. - Objects in the rttMonScheduleAdminTable can be modified only when this object has the value of 'notInService'. - The rttMonCtrlOperState can be modified to control the state of the probe. Once this object is in 'active' status, it cannot be set to 'notInService' while the rttMonCtrlOperState is in 'active' state. Thus the rttMonCtrlOperState object must be transitioned first. This object can be set to 'destroy' from any value at any time.\"",
    "::=",
    "{",
    "rttMonCtrlAdminEntry",
    "9",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "RowStatus"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType Additionally: - for echo, pathEcho and dlsw probes rttMonEchoAdminProtocol and rttMonEchoAdminTargetAddress; - for udpEcho, tcpConnect and jitter probes rttMonEchoAdminTargetAddress and rttMonEchoAdminTargetPort - for http probe rttMonEchoAdminURL - for dns probe rttMonEchoAdminTargetAddressString rttMonEchoAdminNameServer - dhcp probe doesn't require any additional objects All other objects can assume default values. The conceptual Rtt control row will be placed into a 'pending' state (via the rttMonCtrlOperState object) if rttMonScheduleAdminRttStartTime is not specified. Most conceptual Rtt control row objects cannot be modified once this conceptual Rtt control row has been created. The objects that can change are the following: - Objects in the rttMonReactAdminTable can be modified as needed without setting this object to 'notInService'. - Objects in the rttMonScheduleAdminTable can be modified only when this object has the value of 'notInService'. - The rttMonCtrlOperState can be modified to control the state of the probe. Once this object is in 'active' status, it cannot be set to 'notInService' while the rttMonCtrlOperState is in 'active' state. Thus the rttMonCtrlOperState object must be transitioned first. This object can be set to 'destroy' from any value at any time."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 4MIBdepot1 record · 1 source

Description 4

rttMonCtrlAdminStatus · mandatoryMIBdepot1 source

Status in source: mandatory.

Names: rttMonCtrlAdminStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rttMonCtrlAdminStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "RowStatus",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType; - when rttMonCtrlAdminRttType is 'echo' or 'pathEcho', rttMonEchoAdminProtocol and rttMonEchoAdminTargetAddress; - when rttMonCtrlAdminRttType is 'fileIO', rttMonFileIOAdminFilePath; - when rttMonCtrlAdminRttType is 'script', rttMonScriptAdminName. All other objects can assume default values. A default conceptual Rtt control row will be placed into a 'pending' state (via the rttMonCtrlOperState object). Most conceptual Rtt control row objects cannot be modified once this conceptual Rtt control row has been created. The objects that can change are the following: - Objects in the rttMonReactAdminTable can be modified as needed without setting this object to 'notInService'. - Objects in the rttMonScheduleAdminTable can be modified only when this object has the value of 'notInService'. - The rttMonCtrlOperState can be modified to control the state of the probe. Once this object is in 'active' status, it cannot be set to 'notInService' while the rttMonCtrlOperState is in 'active' state. Thus the rttMonCtrlOperState object must be transitioned first. This object can be set to 'destroy' from any value at any time. NOTE: In order for all objects in a PDU to be set at the same time, this object can only be part of a multi-bound PDU, when its value is either createAndGo or createAndWait. All other values need to be placed inside singular bound PDU's.\"",
    "DEFVAL",
    "{",
    "createAndGo",
    "}",
    "::=",
    "{",
    "rttMonCtrlAdminEntry",
    "9",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "RowStatus"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType; - when rttMonCtrlAdminRttType is 'echo' or 'pathEcho', rttMonEchoAdminProtocol and rttMonEchoAdminTargetAddress; - when rttMonCtrlAdminRttType is 'fileIO', rttMonFileIOAdminFilePath; - when rttMonCtrlAdminRttType is 'script', rttMonScriptAdminName. All other objects can assume default values. A default conceptual Rtt control row will be placed into a 'pending' state (via the rttMonCtrlOperState object). Most conceptual Rtt control row objects cannot be modified once this conceptual Rtt control row has been created. The objects that can change are the following: - Objects in the rttMonReactAdminTable can be modified as needed without setting this object to 'notInService'. - Objects in the rttMonScheduleAdminTable can be modified only when this object has the value of 'notInService'. - The rttMonCtrlOperState can be modified to control the state of the probe. Once this object is in 'active' status, it cannot be set to 'notInService' while the rttMonCtrlOperState is in 'active' state. Thus the rttMonCtrlOperState object must be transitioned first. This object can be set to 'destroy' from any value at any time. NOTE: In order for all objects in a PDU to be set at the same time, this object can only be part of a multi-bound PDU, when its value is either createAndGo or createAndWait. All other values need to be placed inside singular bound PDU's."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "createAndGo"
    ]
  ]
}
  • Preserved mibdepot archive

    Module: CISCO-RTTMON-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['OwnerString'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC-v1': ['DisplayString', 'TruthValue', 'RowStatus', 'TimeInterval', 'TimeStamp'], 'SNMPv2-SMI-v1': ['Integer32', 'Gauge32', 'TimeTicks']}
    · Download CISCO-RTTMON.MIB.txt

Historical records

Additional source information

Information from Circitor
rttMonCtrlAdminStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The status of the conceptual RTT control row.

        In order for this object to become active, the following 
        row objects must be defined:  
         - rttMonCtrlAdminRttType
        Additionally:
         - for echo, pathEcho based on 'ipIcmpEcho' and dlsw probes
            rttMonEchoAdminProtocol and 
            rttMonEchoAdminTargetAddress;
         - for echo, pathEcho based on 'mplsLspPingAppl'
            rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress 
            and rttMonEchoAdminLSPFECType
         - for udpEcho, tcpConnect and jitter probes
            rttMonEchoAdminTargetAddress and
            rttMonEchoAdminTargetPort
         - for http and ftp probe
            rttMonEchoAdminURL 
         - for dns probe
            rttMonEchoAdminTargetAddressString 
            rttMonEchoAdminNameServer 
         - dhcp probe doesn't require any additional objects

        All other objects can assume default values. The 
        conceptual Rtt control row will be placed into a 
        'pending' state (via the rttMonCtrlOperState object)
        if rttMonScheduleAdminRttStartTime is not specified.

        Most conceptual Rtt control row objects cannot be 
        modified once this conceptual Rtt control row has been 
        created.  The objects that can change are the following:

         - Objects in the rttMonReactAdminTable can be modified
           as needed without setting this object to 
           'notInService'.
         - Objects in the rttMonScheduleAdminTable can be 
           modified only when this object has the value of
           'notInService'.
         - The rttMonCtrlOperState can be modified to control
           the state of the probe.

        Once this object is in 'active' status, it cannot be 
        set to 'notInService' while the rttMonCtrlOperState
        is in 'active' state.  Thus the rttMonCtrlOperState 
        object must be transitioned first. 

        This object can be set to 'destroy' from any value
        at any time." 
    ::= { rttMonCtrlAdminEntry 9 }
Information from Cisco SMIv1
rttMonCtrlAdminStatus OBJECT-TYPE
    SYNTAX RowStatus








    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the conceptual RTT control row.
        
        In order for this object to become active, the following 
        row objects must be defined:  
         - rttMonCtrlAdminRttType
        Additionally:
         - for echo, pathEcho based on 'ipIcmpEcho' and dlsw probes
            rttMonEchoAdminProtocol and 
            rttMonEchoAdminTargetAddress;
         - for echo, pathEcho based on 'mplsLspPingAppl'
            rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress 
            and rttMonEchoAdminLSPFECType
         - for udpEcho, tcpConnect and jitter probes
            rttMonEchoAdminTargetAddress and
            rttMonEchoAdminTargetPort
         - for http and ftp probe
            rttMonEchoAdminURL 
         - for dns probe
            rttMonEchoAdminTargetAddressString 
            rttMonEchoAdminNameServer 
         - dhcp probe doesn't require any additional objects
        
        All other objects can assume default values. The 
        conceptual Rtt control row will be placed into a 
        'pending' state (via the rttMonCtrlOperState object)
        if rttMonScheduleAdminRttStartTime is not specified.
        
        Most conceptual Rtt control row objects cannot be 
        modified once this conceptual Rtt control row has been 
        created.  The objects that can change are the following:
        
         - Objects in the rttMonReactAdminTable can be modified
           as needed without setting this object to 
           'notInService'.
         - Objects in the rttMonScheduleAdminTable can be 
           modified only when this object has the value of
           'notInService'.
         - The rttMonCtrlOperState can be modified to control
           the state of the probe.
        
        Once this object is in 'active' status, it cannot be 
        set to 'notInService' while the rttMonCtrlOperState
        is in 'active' state.  Thus the rttMonCtrlOperState 
        object must be transitioned first. 
        
        This object can be set to 'destroy' from any value
        at any time."
    ::= { rttMonCtrlAdminEntry 9 }
Information from MIBdepot
rttMonCtrlAdminStatus OBJECT-TYPE
  SYNTAX      RowStatus
  MAX-ACCESS  read-create
  STATUS      current
  DESCRIPTION
       "The status of the conceptual RTT control row. 
  
       In order for this object to become active, the following 
       row objects must be defined:  
        - rttMonCtrlAdminRttType
       Additionally:
        - for echo, pathEcho based on 'ipIcmpEcho' and dlsw probes
           rttMonEchoAdminProtocol and 
           rttMonEchoAdminTargetAddress;
        - for echo, pathEcho based on 'mplsLspPingAppl'
           rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress 
           and rttMonEchoAdminLSPFECType
        - for udpEcho, tcpConnect and jitter probes
           rttMonEchoAdminTargetAddress and
           rttMonEchoAdminTargetPort
        - for http and ftp probe
           rttMonEchoAdminURL 
        - for dns probe
           rttMonEchoAdminTargetAddressString 
           rttMonEchoAdminNameServer 
        - dhcp probe doesn't require any additional objects

       All other objects can assume default values. The 
       conceptual Rtt control row will be placed into a 
       'pending' state (via the rttMonCtrlOperState object)
       if rttMonScheduleAdminRttStartTime is not specified.

       Most conceptual Rtt control row objects cannot be 
       modified once this conceptual Rtt control row has been 
       created.  The objects that can change are the following:

        - Objects in the rttMonReactAdminTable can be modified
          as needed without setting this object to 
          'notInService'.
        - Objects in the rttMonScheduleAdminTable can be 
          modified only when this object has the value of
          'notInService'.
        - The rttMonCtrlOperState can be modified to control
          the state of the probe.
       
       Once this object is in 'active' status, it cannot be 
       set to 'notInService' while the rttMonCtrlOperState
       is in 'active' state.  Thus the rttMonCtrlOperState 
       object must be transitioned first. 

       This object can be set to 'destroy' from any value
       at any time."
  ::= { rttMonCtrlAdminEntry 9 }
Information from Cisco
rttMonCtrlAdminStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The status of the conceptual RTT control row.

        In order for this object to become active, the following 
        row objects must be defined:  
         - rttMonCtrlAdminRttType
        Additionally:
         - for echo, pathEcho based on 'ipIcmpEcho' and dlsw probes
            rttMonEchoAdminProtocol and 
            rttMonEchoAdminTargetAddress;
         - for echo, pathEcho based on 'mplsLspPingAppl'
            rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress 
            and rttMonEchoAdminLSPFECType
         - for udpEcho, tcpConnect and jitter probes
            rttMonEchoAdminTargetAddress and
            rttMonEchoAdminTargetPort
         - for http and ftp probe
            rttMonEchoAdminURL 
         - for dns probe
            rttMonEchoAdminTargetAddressString 
            rttMonEchoAdminNameServer 
         - dhcp probe doesn't require any additional objects

        All other objects can assume default values. The 
        conceptual Rtt control row will be placed into a 
        'pending' state (via the rttMonCtrlOperState object)
        if rttMonScheduleAdminRttStartTime is not specified.

        Most conceptual Rtt control row objects cannot be 
        modified once this conceptual Rtt control row has been 
        created.  The objects that can change are the following:

         - Objects in the rttMonReactAdminTable can be modified
           as needed without setting this object to 
           'notInService'.
         - Objects in the rttMonScheduleAdminTable can be 
           modified only when this object has the value of
           'notInService'.
         - The rttMonCtrlOperState can be modified to control
           the state of the probe.

        Once this object is in 'active' status, it cannot be 
        set to 'notInService' while the rttMonCtrlOperState
        is in 'active' state.  Thus the rttMonCtrlOperState 
        object must be transitioned first. 

        This object can be set to 'destroy' from any value
        at any time." 
    ::= { rttMonCtrlAdminEntry 9 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Siblings (11)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.9.9.42.1.2.1.1.1 rttMonCtrlAdminIndex00 Uniquely identifies a row in the rttMonCtrlAdminTable.

This is a pseudo-random number selected by the management
station when cre…
1.3.6.1.4.1.9.9.42.1.2.1.1.2 rttMonCtrlAdminOwner00 Identifies the entity that created this table row.
1.3.6.1.4.1.9.9.42.1.2.1.1.3 rttMonCtrlAdminTag00 A string which is used by a managing application to
identify the RTT target. This string is inserted into trap
notifications, bu…
1.3.6.1.4.1.9.9.42.1.2.1.1.4 rttMonCtrlAdminRttType00 The type of RTT operation to be performed. This value
must be set in the same PDU or before setting any type
specific configurat…
1.3.6.1.4.1.9.9.42.1.2.1.1.5 rttMonCtrlAdminThreshold00 This object defines an administrative threshold limit.
If the RTT operation time exceeds this limit and if the
conditions specifi…
1.3.6.1.4.1.9.9.42.1.2.1.1.6 rttMonCtrlAdminFrequency00 Specifies the duration between initiating each RTT
operation.

This object cannot be set to a value which would be a
shorter durati…
1.3.6.1.4.1.9.9.42.1.2.1.1.7 rttMonCtrlAdminTimeout00 Specifies the duration to wait for a RTT operation
completion. The value of this object cannot be set to
a value which would spe…
1.3.6.1.4.1.9.9.42.1.2.1.1.8 rttMonCtrlAdminVerifyData00 When set to true, the resulting data in each RTT
operation is compared with the expected data. This
includes checking header inf…
1.3.6.1.4.1.9.9.42.1.2.1.1.10 rttMonCtrlAdminNvgen00 When set to true, this entry will be shown in
'show running' command and can be saved into
Non-volatile memory.
1.3.6.1.4.1.9.9.42.1.2.1.1.11 rttMonCtrlAdminGroupName00 If the operation is created through auto measure group
creation, then this string will specify the group name
to which this opera…
1.3.6.1.4.1.9.9.42.1.2.1.1.12 rttMonCtrlAdminLongTag00 This object provides additional information about the Probe
and is inserted into trap notifications, but has no other
significanc…