This MIB module contain a collection of managed objects
that apply to network devices supporting the Cisco
StackWise(TM) technology.
The StackWise technology provides a method for collectively
utilizing a stack of switches to create a single switching
unit.
The data stack is used for switching data packets and, in
power stack, switches are connected by special stack power
cables to share power. Moreover, stackwise is the concept
for combining multiple systems to give an impression of a
single system so that is why both power stack and data stack
are supported by single MIB.
Terminology:
Stack - A collection of switches connected by the
Cisco StackWise technology.
Master - The switch that is managing the stack.
Member - A switch in the stack that is
NOT the stack master.
Ring - Components that makes up the connections
between the switches in order to create a
stack.
Stackport - A special physical connector used by the ring.
It is possible for a switch have more than
one stackport.
SDM - Switch Database Management.
Stack Power - A collection of switches connected by special
stack power cables to share the power of
inter-connected power supplies across all switches
requiring power. Stack Power is managed by a
single data stack.
Jack-Jack - It is a device that provides the Power Shelf
capabilities required for Stack Power on
the high-end.
POE - Power Over Ethernet
FEP - Front End Power Supply
SOC - Sustained Overload Condition
GLS - Graceful Load Shedding
ILS - Immediate Load Shedding
SRLS - System Ring Load Shedding
SSLS - System Star Load Shedding
Parsed from file CISCO-STACKWISE-MIB.mib
Module: CISCO-STACKWISE-MIB
This MIB module contain a collection of managed objects
that apply to network devices supporting the Cisco
StackWise(TM) technology.
The StackWise technology provides a method for collectively
utilizing a stack of switches to create a single switching
unit.
The data stack is used for switching data packets and, in
power stack, switches are connected by special stack power
cables to share power. Moreover, stackwise is the concept
for combining multiple systems to give an impression of a
single system so that is why both power stack and data stack
are supported by single MIB.
Terminology:
Stack - A collection of switches connected by the
Cisco StackWise technology.
Master - The switch that is managing the stack.
Member - A switch in the stack that is
NOT the stack master.
Ring - Components that makes up the connections
between the switches in order to create a
stack.
Stackport - A special physical connector used by the ring.
It is possible for a switch have more than
one stackport.
SDM - Switch Database Management.
Stack Power - A collection of switches connected by special
stack power cables to share the power of
inter-connected power supplies across all switches
requiring power. Stack Power is managed by a
single data stack.
Jack-Jack - It is a device that provides the Power Shelf
capabilities required for Stack Power on
the high-end.
POE - Power Over Ethernet
FEP - Front End Power Supply
SOC - Sustained Overload Condition
GLS - Graceful Load Shedding
ILS - Immediate Load Shedding
SRLS - System Ring Load Shedding
SSLS - System Star Load Shedding
Parsed from file CISCO-STACKWISE-MIB.my.txt
Company: None
Module: CISCO-STACKWISE-MIB
This MIB module contain a collection of managed objects
that apply to network devices supporting the Cisco
StackWise(TM) technology.
The StackWise technology provides a method for collectively
utilizing a stack of switches to create a single switching
unit.
The data stack is used for switching data packets and, in
power stack, switches are connected by special stack power
cables to share power. Moreover, stackwise is the concept
for combining multiple systems to give an impression of a
single system so that is why both power stack and data stack
are supported by single MIB.
Terminology:
Stack - A collection of switches connected by the
Cisco StackWise technology.
Master - The switch that is managing the stack.
Member - A switch in the stack that is
NOT the stack master.
Ring - Components that makes up the connections
between the switches in order to create a
stack.
Stackport - A special physical connector used by the ring.
It is possible for a switch have more than
one stackport.
SDM - Switch Database Management.
Stack Power - A collection of switches connected by special
stack power cables to share the power of
inter-connected power supplies across all switches
requiring power. Stack Power is managed by a
single data stack.
Jack-Jack - It is a device that provides the Power Shelf
capabilities required for Stack Power on
the high-end.
POE - Power Over Ethernet
FEP - Front End Power Supply
SOC - Sustained Overload Condition
GLS - Graceful Load Shedding
ILS - Immediate Load Shedding
SRLS - System Ring Load Shedding
SSLS - System Star Load Shedding
ciscoStackWiseMIB MODULE-IDENTITY LAST-UPDATED "201002010000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module contain a collection of managed objects that apply to network devices supporting the Cisco StackWise(TM) technology. The StackWise technology provides a method for collectively utilizing a stack of switches to create a single switching unit. The data stack is used for switching data packets and, in power stack, switches are connected by special stack power cables to share power. Moreover, stackwise is the concept for combining multiple systems to give an impression of a single system so that is why both power stack and data stack are supported by single MIB. Terminology: Stack - A collection of switches connected by the Cisco StackWise technology. Master - The switch that is managing the stack. Member - A switch in the stack that is NOT the stack master. Ring - Components that makes up the connections between the switches in order to create a stack. Stackport - A special physical connector used by the ring. It is possible for a switch have more than one stackport. SDM - Switch Database Management. Stack Power - A collection of switches connected by special stack power cables to share the power of inter-connected power supplies across all switches requiring power. Stack Power is managed by a single data stack. Jack-Jack - It is a device that provides the Power Shelf capabilities required for Stack Power on the high-end. POE - Power Over Ethernet FEP - Front End Power Supply SOC - Sustained Overload Condition GLS - Graceful Load Shedding ILS - Immediate Load Shedding SRLS - System Ring Load Shedding SSLS - System Star Load Shedding" REVISION "201002010000Z" DESCRIPTION "Added cswStackPowerStatusGroup, cswStackPowerSwitchStatusGroup, cswStackPowerPortStatusGroup, cswStatusGroupRev1 and cswStackPowerNotificationGroup. Deprecated cswStackWiseMIBCompliance compliance statement. Added cswStackWiseMIBComplianceRev1 compliance statement. Deprecated cswStatusGroup because we deprecated cswEnableStackNotifications" REVISION "200806100000Z" DESCRIPTION "Modified 'cswSwitchState' object." REVISION "200510120000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 500 }
ciscoStackWiseMIB OBJECT IDENTIFIER ::= { ciscoMgmt 500 }
Vendor: Cisco
Module: CISCO-STACKWISE-MIB
[Automatically extracted from oidview.com]
ciscoStackWiseMIB MODULE-IDENTITY LAST-UPDATED "201002010000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module contain a collection of managed objects that apply to network devices supporting the Cisco StackWise(TM) technology. The StackWise technology provides a method for collectively utilizing a stack of switches to create a single switching unit. The data stack is used for switching data packets and, in power stack, switches are connected by special stack power cables to share power. Moreover, stackwise is the concept for combining multiple systems to give an impression of a single system so that is why both power stack and data stack are supported by single MIB. Terminology: Stack - A collection of switches connected by the Cisco StackWise technology. Master - The switch that is managing the stack. Member - A switch in the stack that is NOT the stack master. Ring - Components that makes up the connections between the switches in order to create a stack. Stackport - A special physical connector used by the ring. It is possible for a switch have more than one stackport. SDM - Switch Database Management. Stack Power - A collection of switches connected by special stack power cables to share the power of inter-connected power supplies across all switches requiring power. Stack Power is managed by a single data stack. Jack-Jack - It is a device that provides the Power Shelf capabilities required for Stack Power on the high-end. POE - Power Over Ethernet FEP - Front End Power Supply SOC - Sustained Overload Condition GLS - Graceful Load Shedding ILS - Immediate Load Shedding SRLS - System Ring Load Shedding SSLS - System Star Load Shedding" REVISION "201002010000Z" DESCRIPTION "Added cswStackPowerStatusGroup, cswStackPowerSwitchStatusGroup, cswStackPowerPortStatusGroup, cswStatusGroupRev1 and cswStackPowerNotificationGroup. Deprecated cswStackWiseMIBCompliance compliance statement. Added cswStackWiseMIBComplianceRev1 compliance statement. Deprecated cswStatusGroup because we deprecated cswEnableStackNotifications" REVISION "200806100000Z" DESCRIPTION "Modified 'cswSwitchState' object." REVISION "200510120000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 500 }
ciscoStackWiseMIB MODULE-IDENTITY LAST-UPDATED "201604160000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module contain a collection of managed objects that apply to network devices supporting the Cisco StackWise(TM) technology. The StackWise technology provides a method for collectively utilizing a stack of switches to create a single switching unit. The data stack is used for switching data packets and, in power stack, switches are connected by special stack power cables to share power. Moreover, stackwise is the concept for combining multiple systems to give an impression of a single system so that is why both power stack and data stack are supported by single MIB. Terminology: Stack - A collection of switches connected by the Cisco StackWise technology. Master - The switch that is managing the stack. Member - A switch in the stack that is NOT the stack master. Ring - Components that makes up the connections between the switches in order to create a stack. Stackport - A special physical connector used by the ring. It is possible for a switch have more than one stackport. SDM - Switch Database Management. Stack Power - A collection of switches connected by special stack power cables to share the power of inter-connected power supplies across all switches requiring power. Stack Power is managed by a single data stack. Jack-Jack - It is a device that provides the Power Shelf capabilities required for Stack Power on the high-end. POE - Power Over Ethernet FEP - Front End Power Supply SOC - Sustained Overload Condition GLS - Graceful Load Shedding ILS - Immediate Load Shedding SRLS - System Ring Load Shedding SSLS - System Star Load Shedding" REVISION "201604160000Z" DESCRIPTION "Added following objects in cswGlobals - cswStackDomainNum - cswStackType - cswStackBandWidth Created following tables - cswDistrStackLinkInfoTable -cswDistrStackPhyPortInfoTable Added cswStatusGroupRev2 Deprecated cswStatusGroupRev1 Added cswDistrStackLinkStatusGroup Added cswDistrStackPhyPortStatusGroup Added cswStackWiseMIBComplianceRev4 MIB COMPLIANCE Deprecated cswStackWiseMIBComplianceRev3 MIB COMPLIANCE." REVISION "201511240000Z" DESCRIPTION "Added following Objects in cswSwitchInfoTable - cswSwitchPowerAllocated Added following OBJECT-GROUP - cswStackPowerAllocatedGroup Deprecated cswStackWiseMIBComplianceRev2 MODULE-COMPLIANCE. Added cswStackWiseMIBComplianceRev3 MODULE-COMPLIANCE." REVISION "201112120000Z" DESCRIPTION "Modified 'cswSwitchRole' object." REVISION "201002010000Z" DESCRIPTION "Added cswStackPowerStatusGroup, cswStackPowerSwitchStatusGroup, cswStackPowerPortStatusGroup, cswStatusGroupRev1 and cswStackPowerNotificationGroup. Deprecated cswStackWiseMIBCompliance compliance statement. Added cswStackWiseMIBComplianceRev1 compliance statement. Deprecated cswStatusGroup because we deprecated cswEnableStackNotifications" REVISION "200806100000Z" DESCRIPTION "Modified 'cswSwitchState' object." REVISION "200510120000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 500 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.500.0 | ciscoStackWiseMIBNotifs | 1 | 24 | None |
| 1.3.6.1.4.1.9.9.500.1 | ciscoStackWiseMIBObjects | 3 | 64 | None |
| 1.3.6.1.4.1.9.9.500.2 | ciscoStackWiseMIBConform | 2 | 20 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.450 | ciscoCableAdmCtrlMIB | 3 | 123 | This MIB module defines the managed objects enabling the management of Cable Modem Termination System (CMTS) admission control. CM… |
| 1.3.6.1.4.1.9.9.451 | ciscoIpUrpfMIB | 3 | 47 | Unicast Reverse Path Forwarding (URPF) is a function that checks the validity of the source address of IP packets received on an … |
| 1.3.6.1.4.1.9.9.454 | ciscoDot11LbsMIB | 3 | 23 | This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Serv… |
| 1.3.6.1.4.1.9.9.455 | ciscoImageTc | 0 | 0 | This MIB module defines the textual conventions used in the enhanced image MIB. Glossary: Base Image Essential part of the operatin… |
| 1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | 3 | 50 | This MIB is intended to be implemented on the following IOS based network entities for the purpose of providing network managemen… |
| 1.3.6.1.4.1.9.9.457 | ciscoWdsIdsMIB | 2 | 18 | This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose o… |
| 1.3.6.1.4.1.9.9.458 | ciscoApplianceRedundancyMIB | 3 | 47 | This mib defines the SNMP objects to report the status of High Availability (HA) functionality in Cisco network management applia… |
| 1.3.6.1.4.1.9.9.459 | ciscoBitsClockMIB | 3 | 21 | This MIB provides information on Building Integrated Timing Supply(BITS) clocking sources and modes of operations. It is used to… |
| 1.3.6.1.4.1.9.9.460 | ciscoTpcMIB | 3 | 24 | The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved … |
| 1.3.6.1.4.1.9.9.461 | ciscoEtherCfmMIB | 3 | 39 | This MIB module defines the managed objects and notifications for Ethernet Connectivity Fault Management (CFM). CFM is an end-to-e… |
| 1.3.6.1.4.1.9.9.463 | ciscoSanTapMIB | 3 | 30 | MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that p… |
| 1.3.6.1.4.1.9.9.466 | ciscoEthernetAccessMIB | 2 | 20 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge dev… |
| 1.3.6.1.4.1.9.9.467 | ciscoCryptoAcceleratorMIB | 3 | 107 | The MIB module for monitoring the identity, status, activity and faults of crypto accelerator (CA) modules used in devices implem… |
| 1.3.6.1.4.1.9.9.468 | ciscoContextMappingMIB | 2 | 35 | A single SNMP agent sometimes needs to support multiple instances of the same MIB module, and does so through the use of multiple… |
| 1.3.6.1.4.1.9.9.470 | ciscoEnhancedSlbMIB | 3 | 106 | The MIB for managing Server Load Balancing Manager(s), and products supporting Server Load Balancing(SLB) features. This MIB exten… |
| 1.3.6.1.4.1.9.9.471 | ciscoFlexLinksMIB | 3 | 36 | This MIB module is for configuration and status query of Flex Links feature on the Cisco device. Flex Links are a pair of Layer 2… |
| 1.3.6.1.4.1.9.9.472 | ciscoModuleVirtualizationMIB | 3 | 35 | This MIB provides a way to create virtual contexts, and managing them. A virtual context is logical partition of a physical devi… |
| 1.3.6.1.4.1.9.9.473 | ciscoCcaMIB | 3 | 200 | The Cisco Contact Center Applications (CCCA) Management Information Base (MIB) module defines management instrumentation for appl… |
| 1.3.6.1.4.1.9.9.474 | ciscoFilterGroupMIB | 3 | 55 | The MIB module is for creating and configuring object groups to support packet filtering and access control on IP and other proto… |
| 1.3.6.1.4.1.9.9.479 | ciscoCableWidebandMIB | 3 | 77 | This is the MIB module for the support of Channel Bonding Protocol for the Cable Modem Termination System (CMTS). Wideband DOCSIS… |
| 1.3.6.1.4.1.9.9.480 | ciscoL4L7moduleResourceLimitMIB | 4 | 100 | The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in … |
| 1.3.6.1.4.1.9.9.482 | ciscoInterfaceTopNExtMIB | 3 | 16 | This MIB module is an extension to INTERFACETOPN-MIB. It provides additional management information for sorting device interfaces. |
| 1.3.6.1.4.1.9.9.483 | ciscoIpRanBackHaulMIB | 3 | 248 | This MIB provides information on the IP-RAN traffic from cell site to aggregation site in the following situations. In an GSM en… |
| 1.3.6.1.4.1.9.9.484 | ciscoNacNadMIB | 3 | 157 | This MIB module is for the configuration of a Network Access Device (NAD) on the Cisco Network Admission Control (NAC) system. End… |
| 1.3.6.1.4.1.9.9.485 | ciscoRttMonTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not … |
| 1.3.6.1.4.1.9.9.486 | ciscoRttMonIcmpMIB | 3 | 7 | An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such a… |
| 1.3.6.1.4.1.9.9.487 | ciscoRttMonRtpMIB | 3 | 8 | An extension to the CISCO-RTTMON-MIB for Cisco IP SLA RTP operation, Real-Time Transport Protocol(RFC 1889). This operation provi… |
| 1.3.6.1.4.1.9.9.488 | ciscoFirewallTc | 0 | 0 | This MIB module defines textual conventions that are commonly used in modeling management information pertaining to configuration… |
| 1.3.6.1.4.1.9.9.490 | ciscoNetintMIB | 3 | 11 | This MIB module is for Network Interrupt information on Cisco device. |
| 1.3.6.1.4.1.9.9.491 | ciscoUnifiedFirewallMIB | 3 | 235 | Overview of Cisco Firewall MIB ============================== This MIB Module models status and performance statistics pertaining … |
| 1.3.6.1.4.1.9.9.492 | ciscoCefMIB | 3 | 192 | Cisco Express Forwarding (CEF) describes a high speed switching mechanism that a router uses to forward packets from the inbound … |
| 1.3.6.1.4.1.9.9.493 | ciscoCefTextualConventions | 0 | 0 | ciscoCeftextualConventions |
| 1.3.6.1.4.1.9.9.494 | ciscoEntityRedunTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Entity Redundancy MIBs. |
| 1.3.6.1.4.1.9.9.495 | ciscoPsdClientMIB | 3 | 44 | This MIB module manages the client side functionality of the Persistent Storage Device(PSD). This MIB instrumentation is for conf… |
| 1.3.6.1.4.1.9.9.497 | cGgsnSAMIB | 3 | 247 | This MIB module manages the service-aware feature of Gateway GPRS Support Node (GGSN). This MIB is an enhancement of the CISCO-GG… |
| 1.3.6.1.4.1.9.9.498 | ciscoEntityRedunMIB | 3 | 93 | This management information module supports configuration, control and monitoring of redundancy protection for various kinds of c… |
| 1.3.6.1.4.1.9.9.504 | ciscoSwitchMulticastMIB | 3 | 108 | This MIB module defines management objects for the Multicast Switching features on Cisco Layer 2/3 devices. Definition of some of … |
| 1.3.6.1.4.1.9.9.505 | cpkiMIB | 3 | 44 | A networking device may provide several security services and protocols like SSL, SSH, IPSec/IKE etc. which need identities … |
| 1.3.6.1.4.1.9.9.507 | ciscoPolicyGroupMIB | 3 | 35 | The MIB module is for configuration of policy and policy group. A policy group can be described as a set of entities identified b… |
| 1.3.6.1.4.1.9.9.508 | ciscoSlbHealthMonMIB | 3 | 62 | An extension to the CISCO-SLB-EXT-MIB for SLB health monitoring probes. SLB: Server Load Balancing. Server load balancing provides… |
| 1.3.6.1.4.1.9.9.509 | ciscoWdsInfoMIB | 3 | 141 | This MIB is intended to be implemented on all Cisco network entities that provide Wireless Domain Services (WDS). The WDS provide… |
| 1.3.6.1.4.1.9.9.510 | ciscoErmMIB, ciscoVoiceLmrMIB | 3 | 176 | This MIB module provides management of voice tone signal as static injected tone for Land Mobile Radio The tone signal includes … |
| 1.3.6.1.4.1.9.9.511 | ciscoCbpTargetTCMIB | 0 | 0 | This MIB module defines Textual Conventions for representing targets which have class based policy mappings. A target can be any … |
| 1.3.6.1.4.1.9.9.512 | ciscoLwappWlanMIB | 3 | 249 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weigh… |
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | 4 | 386 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.514 | ciscoLwappTextualConventions | 0 | 0 | This module defines textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Controlle… |
| 1.3.6.1.4.1.9.9.515 | ciscoLwappWebAuthMIB | 4 | 43 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.516 | ciscoLwappLinkTestMIB | 3 | 57 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.517 | ciscoLwappReapMIB | 3 | 63 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.518 | ciscoLwappMfpMIB | 4 | 64 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.519 | ciscoLwappIdsMIB | 3 | 28 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.520 | ciscoLwappCcxRmMIB | 3 | 45 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.521 | ciscoLwappWlanSecurityMIB | 3 | 51 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.522 | ciscoLwappDot11ClientCalibMIB | 3 | 50 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.523 | ciscoLwappClRoamMIB | 3 | 61 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.524 | ciscoLwappQosMIB | 3 | 119 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.525 | ciscoLwappTsmMIB | 3 | 57 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.529 | ciscoItpMsuRatesMIB | 3 | 61 | This MIB provides information used to manage the number of MTP3 MSUs transmitted and received per processor. Many of the higher … |
| 1.3.6.1.4.1.9.9.530 | ciscoNacTcMIB | 0 | 0 | This module defines the textual conventions for Cisco Network Admission Control(NAC) system. The Cisco Network Admission Control … |
| 1.3.6.1.4.1.9.9.532 | ciscoNATExtMIB | 3 | 13 | This MIB is an extension to the NAT-MIB. This MIB module includes objects for providing the NAT related statistics. Acronyms: NAT… |
| 1.3.6.1.4.1.9.9.533 | ciscoCbpTargetMIB | 3 | 25 | This MIB module defines the managed objects for representing targets which have class-based policy mappings. A target can be any… |
| 1.3.6.1.4.1.9.9.543 | ciscoLicenseMgmtMIB | 3 | 131 | The MIB module for managing licenses on the system. The licensing mechanism provides flexibility to enforce licensing for various… |
| 1.3.6.1.4.1.9.9.548 | ciscoErrDisableMIB | 3 | 43 | This MIB module provides the ability for a Network Management Station (NMS) to configure and monitor the error-disable feature vi… |
| ... | ||||