Reference record for OID 1.3.6.1.4.1.9.9.693
- Parent
- 1.3.6.1.4.1.9.9 (ciscoMgmt)
- Node code
- 693
- Node name
- ciscoServiceControlAttackMIB
- Numeric OID
- 1.3.6.1.4.1.9.9.693
- Type
- OBJECT IDENTIFIER
- ASN.1 notation
-
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- IRI notation
- /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- IRI from OID Repository
- /ISO/Identified-Organization/6/1/4/1/9/9/693
Descriptions may differ between sources. The primary description is shown first.
Primary description: Circitor
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.mib
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.mib
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
Alternative description: Cisco
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Alternative description: MIBdepot
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.my.txt
Company: None
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.my.txt
Company: None
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
Information from Circitor
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "200905050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
Information from Cisco SMIv1
ciscoServiceControlAttackMIB OBJECT IDENTIFIER ::= { ciscoMgmt 693 }
Information from OID Repository
Information from MIBdepot
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "200905050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
Information from Cisco
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "201308160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "201308160000Z"
DESCRIPTION
"Updates to support traps for global attacks. For this
1. A new trap is introduced: cscaGlobalAttackFilterChange.
2. A new object is introduced: cscaGlobalAtackType to describe
the type of global attack.
3. A 3 groups are introduced:
a. cscaMIBNotificationGroupRev1, deprecating
cscaMIBNotificationGroup.
b. cscaFilterObjectGroupRev1, deprecating
cscaFilterObjectGroup.
c. cscaMIBNotifControlGroupRev1, deprecating
cscaMIBNotifControlGroup
4. A new compliance is introduced:
cscaMIBComplianceRev1, deprecating cscaMIBCompliance."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
First Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)
Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)
Direct children (3)
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.693.0 | ciscoServiceControlAttackMIBNotifs | 2 | 2 | |
| 1.3.6.1.4.1.9.9.693.1 | ciscoServiceControlAttackMIBObjects | 3 | 38 | |
| 1.3.6.1.4.1.9.9.693.2 | ciscoServiceControlAttackMIBConform | 2 | 12 |
Siblings (645)
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.615 | ciscoLwappRrmMIB | 3 | 28 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.616 | ciscoLwappMeshMIB | 3 | 121 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.617 | ciscoLwappMeshStatsMIB | 4 | 98 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.618 | ciscoLwappSysMIB | 3 | 163 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.619 | ciscoLwappLocalAuthMIB | 3 | 53 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.620 | ciscoLwappMeshBatteryMIB | 3 | 34 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.621 | ciscoH324DialControlMIB | 2 | 34 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing H.324 call information over a telephony network. ITU-T R… |
| 1.3.6.1.4.1.9.9.622 | ciscoLwappDot11ClientTsMIB | 3 | 34 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.623 | ciscoLwappCdpMIB | 3 | 51 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.624 | ciscoIpSlaTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO IPSLA MIBs. Acronyms: FEC: Forward Equivalence Class LPD: Label Path Discovery L… |
| 1.3.6.1.4.1.9.9.626 | ciscoDot11HtMacMIB | 3 | 40 | This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high… |
| 1.3.6.1.4.1.9.9.627 | ciscoDot11RadarMIB | 3 | 25 | This MIB module is for IEEE 802.11a/h Root device, i.e. Access Point (AP) or Root Bridge. This MIB allows dynamic frequency selec… |
| 1.3.6.1.4.1.9.9.628 | ciscoServiceControlSubscribersMIB | 3 | 37 | This MIB provides global and specific information on subscribers managed by a service control entity, which is a network element … |
| 1.3.6.1.4.1.9.9.630 | ciscoTelnetServerMIB | 3 | 34 | MIB module for displaying and configuring Telnet related features in a device. Telnet is a program to log into another computer o… |
| 1.3.6.1.4.1.9.9.631 | ciscoServiceControlLinkMIB | 3 | 21 | This MIB module provides information about the status and configuration of links used by service control entities. The link on a … |
| 1.3.6.1.4.1.9.9.632 | ciscoSmeMIB | 3 | 54 | MIB module to manage Storage Media Encryption (SME) service. SME is an encryption service provided by an encryption node residing… |
| 1.3.6.1.4.1.9.9.633 | ciscoIpSlaAutoMIB | 3 | 57 | This module defines the MIB for IP SLA Automation. IP SLA Automation consists of the following: 1. Use of grouping - Group is an … |
| 1.3.6.1.4.1.9.9.634 | ciscoServiceControlTpStatsMIB | 3 | 39 | This MIB provides information and statistics on the traffic processor(s) of a service control entity, which is a network element … |
| 1.3.6.1.4.1.9.9.635 | ciscoIpSlaJitterMIB | 3 | 57 | This MIB module defines templates for IP SLA operations of UDP Jitter and ICMP Jitter. The UDP Jitter operation is designed to me… |
| 1.3.6.1.4.1.9.9.636 | ciscoIpSlaEchoMIB | 3 | 71 | This MIB module defines the templates for IP SLA operations of ICMP echo, UDP echo and TCP connect. The ICMP echo operation measu… |
| 1.3.6.1.4.1.9.9.637 | ciscoServiceControlRdrMIB | 3 | 56 | This MIB module defines objects describing statistics and configuration relating to the Raw Data Record Formatter running on a se… |
| 1.3.6.1.4.1.9.9.638 | ciscoAgwMIB | 3 | 324 | This module manages Cisco's WiMAX ASN Gateway (ASN-GW). A WiMAX network supports wireless data communication through WiMAX radio … |
| 1.3.6.1.4.1.9.9.639 | ciscoOtnIfMIB | 3 | 137 | This MIB module defines the managed objects for physical layer characteristics of DWDM optical channel interfaces and performanc… |
| 1.3.6.1.4.1.9.9.640 | ciscoImageLicenseMgmtMIB | 3 | 31 | The MIB module for managing the running image level of a Cisco device. Cisco's licensing mechanism provides flexibility to run a … |
| 1.3.6.1.4.1.9.9.642 | ciscoBridgeDomainMIB | 3 | 24 | A bridge domain is one of the means by which it is possible to define a broadcast domain on a bridging device. It is an alternati… |
| 1.3.6.1.4.1.9.9.643 | ciscoTelepresenceMIB | 3 | 119 | The MIB module defines the managed objects for a Telepresence system. Telepresence refers to a set of technologies which allow a p… |
| 1.3.6.1.4.1.9.9.644 | ciscoTelepresenceCallMIB | 3 | 178 | The MIB module defines the managed objects for Telepresence calls. Telepresence refers to a set of technologies which allow a pers… |
| 1.3.6.1.4.1.9.9.645 | ciscoEtherExtMIB | 3 | 18 | The MIB module to describe generic objects for ethernet-like network interfaces. This MIB provides ethernet-like network interfac… |
| 1.3.6.1.4.1.9.9.646 | ciscoAonStatusMIB | 3 | 80 | This MIB module defines managed objects that facilitate the management of AON node. The information available through this MIB in… |
| 1.3.6.1.4.1.9.9.647 | ciscoGgsnExtMIB | 3 | 212 | This MIB module extends the CISCO-GGSN-MIB. This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device pr… |
| 1.3.6.1.4.1.9.9.648 | ciscoVirtualInterfaceMIB | 2 | 32 | The MIB module for creation and deletion of Virtual Interfaces and Virtual Interface Groups. In addition to this MIB, interface … |
| 1.3.6.1.4.1.9.9.650 | ciscoL4L7moduleRedundancyMIB | 3 | 71 | The L4-7 SLB devices are used for scaling websites, building web enabled applications, and migrating to web services. The followin… |
| 1.3.6.1.4.1.9.9.651 | ciscoCommonRolesExtMIB | 3 | 37 | A MIB Module for managing the roles that are common between access methods like Command Line Interface (CLI), SNMP and XML interf… |
| 1.3.6.1.4.1.9.9.652 | ciscoSwitchStatsMIB | 3 | 106 | The MIB module provides management information for configuration and monitoring of traffic statistics on Cisco's switching device… |
| 1.3.6.1.4.1.9.9.653 | ciscoAdmissionPolicyMIB | 3 | 36 | This MIB module defines managed objects that facilitate the management of policies upon host(s) admission to a network. The inform… |
| 1.3.6.1.4.1.9.9.654 | ciscoMabMIB | 3 | 20 | MIB module for monitoring and configuring MAC Authentication Bypass (MAB) feature in the system. MAC Auth Bypass feature provides… |
| 1.3.6.1.4.1.9.9.655 | ciscoDigitalMediaSystemsMIB | 3 | 195 | Acronyms and Definitions The following acronyms and terms are used in this document: DMS: Digital Media Systems DAM: Digital As… |
| 1.3.6.1.4.1.9.9.656 | ciscoAuthFrameworkMIB | 3 | 117 | MIB module for Authentication Framework in the system. Authentication Framework provides generic configurations for authenticatio… |
| 1.3.6.1.4.1.9.9.657 | ciscoSbcCallStatsMIB | 3 | 201 | The main purpose of this MIB is to define the statistics information for Session Border Controller application. The statistics ar… |
| 1.3.6.1.4.1.9.9.658 | ciscoSessBorderCtrlrEventMIB | 3 | 208 | The main purpose of this MIB is to define the SNMP notifications and alarms generated by Session Border Controller application an… |
| 1.3.6.1.4.1.9.9.660 | ciscoNportVirtualizationMIB | 3 | 19 | The MIB module for the management of N_port Virtualization or NPV within the framework of Cisco's N_port virtualization (NPV) Arc… |
| 1.3.6.1.4.1.9.9.661 | ciscoWan3gMIB | 3 | 378 | This MIB module provides network management support for Cisco cellular 3G WAN products. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS … |
| 1.3.6.1.4.1.9.9.662 | ciscoCbpTcMIB | 0 | 0 | This MIB module defines textual conventions used by the CISCO-CBP-BASE-CFG-MIB, CISCO-CBP-BASE-MON-MIB, and any MIB modules exten… |
| 1.3.6.1.4.1.9.9.663 | ciscoSwitchHardwareCapacityMIB | 3 | 141 | This MIB module defines the managed objects for hardware capacity of Cisco switching devices. The hardware capacity information c… |
| 1.3.6.1.4.1.9.9.664 | ciscoMmodalContactAppsMIB | 3 | 359 | The Cisco Unified Multi-Modal Contact Applications (MMCA) platform is a highly scalable, modular, extensible, open and secure pl… |
| 1.3.6.1.4.1.9.9.667 | ciscoServiceControllerMIB | 2 | 31 | This MIB module defines objects describing traffic controllers used by a service control entity. A service control entity is a ne… |
| 1.3.6.1.4.1.9.9.668 | ciscoP2PIfMIB | 3 | 16 | The Point to Point Interface MIB module. This MIB manages the generic objects for Serial link or SONET/SDH like point to point ne… |
| 1.3.6.1.4.1.9.9.669 | ciscoCdmaPdsnExtMIB | 3 | 178 | This MIB is an extension to the CISCO-CDMA-PDSN-MIB. A CDMA network supports wireless data communication through 3G CDMA radio acc… |
| 1.3.6.1.4.1.9.9.670 | ciscoReportIntervalTcMIB | 0 | 0 | CISCO-REPORT-INTERVAL-TC-MIB |
| 1.3.6.1.4.1.9.9.672 | ciscoMobilityTapMIB | 3 | 24 | This module manages Cisco's intercept feature for Mobility Gateway Products. This MIB is used along with CISCO-TAP2-MIB MIB to int… |