Reference record for OID 1.3.6.1.4.1.9.9.693
- Parent
- 1.3.6.1.4.1.9.9 (ciscoMgmt)
- Node code
- 693
- Node name
- ciscoServiceControlAttackMIB
- Numeric OID
- 1.3.6.1.4.1.9.9.693
- Type
- OBJECT IDENTIFIER
- ASN.1 notation
-
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- IRI notation
- /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- IRI from OID Repository
- /ISO/Identified-Organization/6/1/4/1/9/9/693
Descriptions may differ between sources. The primary description is shown first.
Primary description: Circitor
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.mib
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.mib
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
Alternative description: Cisco
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Alternative description: MIBdepot
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.my.txt
Company: None
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.my.txt
Company: None
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
Information from Circitor
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "200905050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
Information from Cisco SMIv1
ciscoServiceControlAttackMIB OBJECT IDENTIFIER ::= { ciscoMgmt 693 }
Information from OID Repository
Information from MIBdepot
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "200905050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
Information from Cisco
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "201308160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "201308160000Z"
DESCRIPTION
"Updates to support traps for global attacks. For this
1. A new trap is introduced: cscaGlobalAttackFilterChange.
2. A new object is introduced: cscaGlobalAtackType to describe
the type of global attack.
3. A 3 groups are introduced:
a. cscaMIBNotificationGroupRev1, deprecating
cscaMIBNotificationGroup.
b. cscaFilterObjectGroupRev1, deprecating
cscaFilterObjectGroup.
c. cscaMIBNotifControlGroupRev1, deprecating
cscaMIBNotifControlGroup
4. A new compliance is introduced:
cscaMIBComplianceRev1, deprecating cscaMIBCompliance."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
First Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)
Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)
Direct children (3)
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.693.0 | ciscoServiceControlAttackMIBNotifs | 2 | 2 | |
| 1.3.6.1.4.1.9.9.693.1 | ciscoServiceControlAttackMIBObjects | 3 | 38 | |
| 1.3.6.1.4.1.9.9.693.2 | ciscoServiceControlAttackMIBConform | 2 | 12 |
Siblings (645)
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | 4 | 386 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.514 | ciscoLwappTextualConventions | 0 | 0 | This module defines textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Controlle… |
| 1.3.6.1.4.1.9.9.515 | ciscoLwappWebAuthMIB | 4 | 43 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.516 | ciscoLwappLinkTestMIB | 3 | 57 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.517 | ciscoLwappReapMIB | 3 | 63 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.518 | ciscoLwappMfpMIB | 4 | 64 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.519 | ciscoLwappIdsMIB | 3 | 28 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.520 | ciscoLwappCcxRmMIB | 3 | 45 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.521 | ciscoLwappWlanSecurityMIB | 3 | 51 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.522 | ciscoLwappDot11ClientCalibMIB | 3 | 50 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.523 | ciscoLwappClRoamMIB | 3 | 61 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.524 | ciscoLwappQosMIB | 3 | 119 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.525 | ciscoLwappTsmMIB | 3 | 57 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.529 | ciscoItpMsuRatesMIB | 3 | 61 | This MIB provides information used to manage the number of MTP3 MSUs transmitted and received per processor. Many of the higher … |
| 1.3.6.1.4.1.9.9.530 | ciscoNacTcMIB | 0 | 0 | This module defines the textual conventions for Cisco Network Admission Control(NAC) system. The Cisco Network Admission Control … |
| 1.3.6.1.4.1.9.9.532 | ciscoNATExtMIB | 3 | 13 | This MIB is an extension to the NAT-MIB. This MIB module includes objects for providing the NAT related statistics. Acronyms: NAT… |
| 1.3.6.1.4.1.9.9.533 | ciscoCbpTargetMIB | 3 | 25 | This MIB module defines the managed objects for representing targets which have class-based policy mappings. A target can be any… |
| 1.3.6.1.4.1.9.9.543 | ciscoLicenseMgmtMIB | 3 | 131 | The MIB module for managing licenses on the system. The licensing mechanism provides flexibility to enforce licensing for various… |
| 1.3.6.1.4.1.9.9.548 | ciscoErrDisableMIB | 3 | 43 | This MIB module provides the ability for a Network Management Station (NMS) to configure and monitor the error-disable feature vi… |
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | 2 | 38 | This MIB contains extensions to tables in CISCO-RTTMON-MIB to support IP-layer extensions, specifically IPv6 addresses and other … |
| 1.3.6.1.4.1.9.9.573 | ciscoQosTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Qos MIBs. |
| 1.3.6.1.4.1.9.9.576 | ciscoLwappMobilityMIB | 3 | 60 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.577 | ciscoLwappAclMIB | 3 | 26 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.578 | ciscoRoutePoliciesMIB | 3 | 5 | This module provides a subtree to define OIDs so that various routing 'policies' used by Cisco routers can be expressed. This mod… |
| 1.3.6.1.4.1.9.9.580 | ciscoSwitchQosMIB | 3 | 295 | This MIB module extends the CISCO-CLASS-BASED-QOS-MIB by defining configuration and statistics information specific to the qualit… |
| 1.3.6.1.4.1.9.9.583 | ciscoGslbTcMIB | 0 | 0 | This MIB module defines Textual Conventions and OBJECT-IDENTITIES for use in documents defining management information base (MIBs… |
| 1.3.6.1.4.1.9.9.584 | ciscoEntityDiagTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Entity Diag MIB. |
| 1.3.6.1.4.1.9.9.585 | ciscoIpSlaEthernetMIB | 3 | 194 | This MIB module consists of two parts. 1) Auto-Ethernet-CFM Control: | | 2) ethernetJitter Stats: | | The first part defines a mechani… |
| 1.3.6.1.4.1.9.9.586 | ciscoNotificationControlMIB | 2 | 28 | This MIB provides network management support to regulate the transmission of notifications generated by a system providing networ… |
| 1.3.6.1.4.1.9.9.589 | ciscoGslbSystemMIB | 3 | 103 | This MIB module defines objects for network and system information of Global Server Load Balancer(GSLB) as a network device. A G… |
| 1.3.6.1.4.1.9.9.590 | ciscoCvpMIB | 3 | 255 | The Cisco Unified Customer Voice Portal (CVP) application integrates with both traditional time-division multiplexing (TDM) and I… |
| 1.3.6.1.4.1.9.9.592 | ciscoPrefPathMIB | 3 | 56 | The MIB module for the management of preferred path. This MIB enables managers to configure and monitor Preferred Path parameters. … |
| 1.3.6.1.4.1.9.9.593 | ciscoFcSdvMIB | 3 | 28 | This MIB instrumentation is for managing Fibre Channel (FC) SAN Device Virtualization (SDV) solution on Cisco Fibre Channel devic… |
| 1.3.6.1.4.1.9.9.594 | ciscoApplicationAccelerationMIB | 3 | 37 | This is a MIB for managing Application Acceleration System(s). This MIB includes instrumentation for providing the performance st… |
| 1.3.6.1.4.1.9.9.595 | ciscoGslbDnsMIB | 3 | 165 | The MIB defines objects for status and statistics information of DNS related operations of Global Server Load Balancer(GSLB). Th… |
| 1.3.6.1.4.1.9.9.597 | ciscoContentServicesMIB | 3 | 349 | Content Service is a capability to examine IP/TCP/UDP headers, payload and enable billing based on the content being provided. Ab… |
| 1.3.6.1.4.1.9.9.598 | ciscoLwappAAAMIB | 3 | 73 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC), that terminate the Light Weigh… |
| 1.3.6.1.4.1.9.9.599 | ciscoLwappDot11ClientMIB | 4 | 49 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.600 | ciscoGslbHealthMonMIB | 3 | 90 | The MIB defines objects related to global keepalive properties in GSLB devices. It contains the tables for keep alive configurat… |
| 1.3.6.1.4.1.9.9.601 | ciscoResilientEthernetProtocolMIB | 3 | 77 | This MIB module defines objects required for managing Resilient Ethernet Protocol (REP). Resilient Ethernet Protocol (REP) is a C… |
| 1.3.6.1.4.1.9.9.602 | ciscoPacketCaptureMIB | 3 | 103 | The MIB module for the management of packet capture feature. |
| 1.3.6.1.4.1.9.9.603 | ciscoThreatMitigationServiceMIB | 3 | 68 | This MIB provides management information about the Threat Mitigation Service(TMS) entity named 'Consumer'. TMS is part of Cisco's… |
| 1.3.6.1.4.1.9.9.604 | cdot1CfmMIB | 3 | 166 | Connectivity Fault Management module for managing IEEE 802.1ag |
| 1.3.6.1.4.1.9.9.606 | ciscoLwappMeshLinkTestMIB | 3 | 46 | ciscoLwappMeshLinkTestMIB MODULE-IDENTITY LAST-UPDATED "200702050000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Sy… |
| 1.3.6.1.4.1.9.9.607 | ciscoDot11HtPhyMIB | 3 | 71 | This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high… |
| 1.3.6.1.4.1.9.9.610 | ciscoLwappRogueMIB | 3 | 78 | This MIB is intended to be implemented on all those devices operating as Central Controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.611 | ciscoLwappDot11ClientCCXTextualConventions | 0 | 0 | This module defines the textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Cont… |
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | 3 | 17 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.613 | ciscoEvcMIB | 3 | 156 | Metro Ethernet services can support a wide range of applications and subscriber needs easily, efficiently and cost-effectively. … |
| 1.3.6.1.4.1.9.9.614 | ciscoLwappDot11LdapMIB | 3 | 33 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |