Reference record for OID 1.3.6.1.4.1.9.9.693
- Parent
- 1.3.6.1.4.1.9.9 (ciscoMgmt)
- Node code
- 693
- Node name
- ciscoServiceControlAttackMIB
- Numeric OID
- 1.3.6.1.4.1.9.9.693
- Type
- OBJECT IDENTIFIER
- ASN.1 notation
-
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- IRI notation
- /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- IRI from OID Repository
- /ISO/Identified-Organization/6/1/4/1/9/9/693
Descriptions may differ between sources. The primary description is shown first.
Primary description: Circitor
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.mib
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.mib
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
Alternative description: Cisco
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Alternative description: MIBdepot
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.my.txt
Company: None
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.my.txt
Company: None
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
Information from Circitor
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "200905050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
Information from Cisco SMIv1
ciscoServiceControlAttackMIB OBJECT IDENTIFIER ::= { ciscoMgmt 693 }
Information from OID Repository
Information from MIBdepot
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "200905050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
Information from Cisco
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "201308160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "201308160000Z"
DESCRIPTION
"Updates to support traps for global attacks. For this
1. A new trap is introduced: cscaGlobalAttackFilterChange.
2. A new object is introduced: cscaGlobalAtackType to describe
the type of global attack.
3. A 3 groups are introduced:
a. cscaMIBNotificationGroupRev1, deprecating
cscaMIBNotificationGroup.
b. cscaFilterObjectGroupRev1, deprecating
cscaFilterObjectGroup.
c. cscaMIBNotifControlGroupRev1, deprecating
cscaMIBNotifControlGroup
4. A new compliance is introduced:
cscaMIBComplianceRev1, deprecating cscaMIBCompliance."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
First Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)
Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)
Direct children (3)
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.693.0 | ciscoServiceControlAttackMIBNotifs | 2 | 2 | |
| 1.3.6.1.4.1.9.9.693.1 | ciscoServiceControlAttackMIBObjects | 3 | 38 | |
| 1.3.6.1.4.1.9.9.693.2 | ciscoServiceControlAttackMIBConform | 2 | 12 |
Siblings (645)
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.181 | ciscoWirelessLinkMetricsMIB | 4 | 141 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface link metrics specification. Glossary The followin… |
| 1.3.6.1.4.1.9.9.183 | ciscoGprsAccPtMIB | 3 | 338 | This MIB module supports access point configuration for GGSN in a GPRS system. GPRS [1] is a GSM network providing mobile wireles… |
| 1.3.6.1.4.1.9.9.184 | ciscoPimMIB | 3 | 36 | This MIB module defines the cisco specific variables for Protocol Independent Multicast (PIM) management. These definitions are a… |
| 1.3.6.1.4.1.9.9.185 | ciscoBertMIB | 2 | 46 | The MIB module to configure and perform Bit Error Rate Testing (BERT) on DS3, DS1/E1 and DS0/DS0Bundle interfaces. Bit error rate… |
| 1.3.6.1.4.1.9.9.187 | ciscoBgp4MIB | 4 | 137 | An extension to the IETF BGP4 MIB module defined in RFC 1657. Following is the terminology associated with Border Gateway Protocol… |
| 1.3.6.1.4.1.9.9.188 | cGtpMIB | 3 | 248 | This MIB module manages the GPRS Tunnelling Protocol (GTP) on GGSN and SGSN. GPRS provides wireless access to packet data network… |
| 1.3.6.1.4.1.9.9.189 | ciscoPortQosMIB | 3 | 114 | Cisco PORT QOS MIB - Overview This MIB module is for the management of Cisco's per port rate-limiting and traffic shaping on L3 sw… |
| 1.3.6.1.4.1.9.9.190 | ciscoVoiceAppsMIB | 3 | 40 | The MIB Module for the management of Cisco Voice Applications. This MIB is designed to work in conjunction with the SYSAPPL-MIB … |
| 1.3.6.1.4.1.9.9.191 | ciscoIpUplinkRedirectMIB | 3 | 11 | This MIB module is for the configuration of Cisco IP Uplink Redirect feature. |
| 1.3.6.1.4.1.9.9.192 | ciscoGprsChargingMIB | 3 | 315 | This MIB module manages the charging related function on the GGSN node of a GPRS system. The following diagram illustrates a simp… |
| 1.3.6.1.4.1.9.9.194 | ciscoPppoeMIB | 3 | 89 | Cisco PPPoE sessions management MIB Module. |
| 1.3.6.1.4.1.9.9.195 | ciscoEntityExtMIB | 3 | 64 | This MIB is an extension of the ENTITY-MIB specified in RFC2737. This MIB module contains Cisco-defined extensions to the entit… |
| 1.3.6.1.4.1.9.9.197 | ciscoDistDirMIB | 3 | 123 | Cisco Distributed Director MIB. The Cisco Distributed Director provides global Internet scalability and increased performance as … |
| 1.3.6.1.4.1.9.9.198 | ciscoRfSupMIB | 3 | 58 | This MIB was designed to complement the CISCO-RF-MIB by providing additional optional status and configuration control for redund… |
| 1.3.6.1.4.1.9.9.199 | ciscoSmFileDownloadMIB | 3 | 23 | The MIB module for downloading files to the Service Modules specifically designed for an architecture containing a controller car… |
| 1.3.6.1.4.1.9.9.201 | ciscoSwitchUsageMIB | 3 | 15 | This MIB defines objects related to statistics for the usage of switch fabric. The switch fabric is used by the incoming packets … |
| 1.3.6.1.4.1.9.9.202 | ciscoOscpMIB | 3 | 52 | The MIB module for managing the Cisco Optical Supervisory Channel Protocol (OSCP). The OSCP is used to determine and maintain wav… |
| 1.3.6.1.4.1.9.9.204 | ciscoXdslLineMIB | 2 | 32 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to different t… |
| 1.3.6.1.4.1.9.9.215 | ciscoMacNotificationMIB | 3 | 72 | This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring device… |
| 1.3.6.1.4.1.9.9.216 | ciscoContentNetworkMIB | 3 | 34 | This MIB module defines objects for Content Network devices. A Content Network is a collection of devices that optimizes the deli… |
| 1.3.6.1.4.1.9.9.217 | ciscoCat6kCrossbarMIB | 3 | 210 | The Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, … |
| 1.3.6.1.4.1.9.9.218 | ciscoIfThresholdMIB | 3 | 65 | ciscoIfthresholdMIB |
| 1.3.6.1.4.1.9.9.219 | ciscoVoiceDnisMIB | 3 | 24 | The MIB module provides management support for Dialer Number Information Service (DNIS) mapping. A DNIS entry is associated with… |
| 1.3.6.1.4.1.9.9.220 | ciscoPaeMIB | 3 | 231 | Cisco Port Access Entity (PAE) module for managing IEEE Std 802.1x. This MIB provides Port Access Entity information that are eith… |
| 1.3.6.1.4.1.9.9.221 | ciscoEnhancedMemPoolMIB | 3 | 87 | New MIB module for monitoring the memory pools of all physical entities on a managed system. |
| 1.3.6.1.4.1.9.9.222 | ciscoEnhancedWredMIB | 3 | 70 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop (WRED) is a method which avoids traffic congestion on an outp… |
| 1.3.6.1.4.1.9.9.223 | ciscoWanNcdpMIB | 3 | 58 | This MIB module is intended for the management of network clock distribution and the Network Clock Distribution Protocol (NCDP) i… |
| 1.3.6.1.4.1.9.9.224 | ciscoDevExcepReportMIB | 3 | 29 | This mib defines the SNMP objects to report exceptions to north-bound NMS. The devices implementing this MIB monitor the status of… |
| 1.3.6.1.4.1.9.9.225 | ciscoLagMIB | 3 | 56 | Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either exclud… |
| 1.3.6.1.4.1.9.9.226 | ciscoNDEMIB | 4 | 17 | The Netflow Data Export (NDE) MIB provides instrumentation for configuration and operation of the Netflow Data Export feature. A … |
| 1.3.6.1.4.1.9.9.227 | ciscoItpAclMIB | 3 | 45 | The MIB for managing access lists that control messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Trans… |
| 1.3.6.1.4.1.9.9.228 | ciscoItpRtMIB | 3 | 47 | This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco … |
| 1.3.6.1.4.1.9.9.229 | ciscoDs1ExtMIB | 2 | 129 | The MIB module to describe DS1/E1 interface objects. This is an extension to the standard DS1/E1 MIB (RFC 2495). Unless mentioned… |
| 1.3.6.1.4.1.9.9.230 | ciscoItpActMIB | 3 | 29 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This… |
| 1.3.6.1.4.1.9.9.231 | ciscoItpTextualConventions | 0 | 0 | The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this… |
| 1.3.6.1.4.1.9.9.232 | ciscoItpSpMIB | 3 | 384 | The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Ci… |
| 1.3.6.1.4.1.9.9.233 | ciscoItpSccpMIB | 3 | 194 | The MIB for Signaling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP … |
| 1.3.6.1.4.1.9.9.234 | ciscoWanTopologyMIB | 3 | 83 | A management station can use this MIB module for the maintenance of persistent topology information of the PNNI network. Previous… |
| 1.3.6.1.4.1.9.9.235 | ciscoImaMIB | 2 | 60 | The MIB module describes Cisco IMA objects. This is an extension to the standard of ATM Forum IMA version 1.1, AF-PHY-0086.001 Spe… |
| 1.3.6.1.4.1.9.9.236 | ciscoWanSctMgmtMIB | 2 | 18 | MIB module to manage SCT files in a node. SCTs (Service Class Templates) are nodal configuration files, which define the traffic … |
| 1.3.6.1.4.1.9.9.237 | ciscoNmsApplHealthMIB | 3 | 21 | This MIB defines Cisco NMS Application (cna) Health Status Notifications and the related objects. These notifications will be sen… |
| 1.3.6.1.4.1.9.9.238 | ciscoIGMPFilterMIB | 2 | 45 | IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Mul… |
| 1.3.6.1.4.1.9.9.240 | cGgsnMIB | 3 | 389 | This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device provides interworking with external packet-dat… |
| 1.3.6.1.4.1.9.9.241 | cggsnQosMIB | 2 | 89 | This MIB module manages the Quality of Service parameters of GGSN in a GPRS system. GGSN is the Gateway GPRS Support Node in the … |
| 1.3.6.1.4.1.9.9.242 | ciscoCableAvailabilityMIB | 3 | 60 | This is the MIB module for management of Hot Standby Connection to Connection Protocol (HCCP) features. HCCP is a Cisco proprieta… |
| 1.3.6.1.4.1.9.9.243 | ciscoHealthMonitorMIB | 3 | 22 | Health Monitor MIB module. The Health Monitor uses a model based on events of varying severity and frequency, and predefined rule… |
| 1.3.6.1.4.1.9.9.244 | ciscoNbarProtocolDiscoveryMIB | 3 | 84 | Cisco NBAR Protocol Discovery MIB NBAR - Network Based Application Recognition is an intelligent classification engine that reco… |
| 1.3.6.1.4.1.9.9.245 | ciscoGtpDirectorMIB | 3 | 35 | This MIB module defines objects that are used to manage GTP Director Module. In the GPRS network, the APN is the identifier that s… |
| 1.3.6.1.4.1.9.9.246 | ciscoL2TunnelConfigMIB | 3 | 65 | This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be consi… |
| 1.3.6.1.4.1.9.9.248 | ciscoItpSp2MIB | 3 | 30 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signaling System No. 7(SS7) Network. This … |