The MIB module for Local Packet Transport Services(LPTS)
related information like the flows and the policer
values related to various flows present in the system.
The number of packets coming into the system is controlled
by the policer values associated with the protocol. Each
protocol is classified into different flows and a rate
limit is associated with the flows. Policer is a numerical
value controlling the number of packets entering the box.
The flows represent individual, specific protocols.
Flow types also represent the degree of trust for a given
packet. Ex: BGP packets coming from established session is
assigned one flow, packets from configured BGP peer are
assigned different flow . Other BGP packets are assigned
a third flow.
Definitions:
LPTS - Local Packet Transport Services.
It is a network infrastructure
subsystem that provides a common
facility for transport of packets
which are destined towards the router
(for-us packets), to the exact
applications. In addtion
to that, it also
provides policing of for-us packets
FlowType - Represents individual, specific protocols.
Flow also represents the degree of trust
for a given packet.
LC - Line Cards.
Policer - Index to FlowType.
CurrentRate - Number of packets allowed
into the box in PPS (Packets Per Second).
Type - Defines the scope of the flow applicable at
a specific node or Line card.
Precedence - Precedence is the selection mechanism for
a specific Type if more than one Type is
configured for the same flow. 'local'
FlowType has higher precedence over 'global'
and 'static' FlowTypes. 'global' FlowType has
higher precedence over 'static' FlowType.
nodeID - The line card for which the flow configuration
is made.
ciscoLptsMIB OBJECT IDENTIFIER ::= { ciscoMgmt 812 }
ciscoLptsMIB MODULE-IDENTITY LAST-UPDATED "201309030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module for Local Packet Transport Services(LPTS) related information like the flows and the policer values related to various flows present in the system. The number of packets coming into the system is controlled by the policer values associated with the protocol. Each protocol is classified into different flows and a rate limit is associated with the flows. Policer is a numerical value controlling the number of packets entering the box. The flows represent individual, specific protocols. Flow types also represent the degree of trust for a given packet. Ex: BGP packets coming from established session is assigned one flow, packets from configured BGP peer are assigned different flow . Other BGP packets are assigned a third flow. Definitions: LPTS - Local Packet Transport Services. It is a network infrastructure subsystem that provides a common facility for transport of packets which are destined towards the router (for-us packets), to the exact applications. In addtion to that, it also provides policing of for-us packets FlowType - Represents individual, specific protocols. Flow also represents the degree of trust for a given packet. LC - Line Cards. Policer - Index to FlowType. CurrentRate - Number of packets allowed into the box in PPS (Packets Per Second). Type - Defines the scope of the flow applicable at a specific node or Line card. Precedence - Precedence is the selection mechanism for a specific Type if more than one Type is configured for the same flow. 'local' FlowType has higher precedence over 'global' and 'static' FlowTypes. 'global' FlowType has higher precedence over 'static' FlowType. nodeID - The line card for which the flow configuration is made." REVISION "201309030000Z" DESCRIPTION "Latest version of this MIB module." ::= { ciscoMgmt 812 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.812.0 | ciscoLptsMIBNotifs | 0 | 0 | None |
1.3.6.1.4.1.9.9.812.1 | ciscoLptsMIBObjects | 2 | 14 | None |
1.3.6.1.4.1.9.9.812.2 | ciscoLptsMIBConform | 2 | 5 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.762 | ciscoWanOptimizationMIB | 3 | 302 | This MIB is for managing Wide Area Network (WAN) Optimization systems. The objective of WAN optimization system is to reduce as m… |
1.3.6.1.4.1.9.9.763 | ciscoVideoTc | 0 | 0 | This MIB module defines a collection of common video-related textual conventions to be used in Cisco MIBS for video-capable produ… |
1.3.6.1.4.1.9.9.764 | ciscoUbeMIB | 2 | 12 | This MIB describes objects used for managing Cisco Unified Border Element (CUBE). The Cisco Unified Border Element (CUBE) is a Ci… |
1.3.6.1.4.1.9.9.765 | ciscoFlowCloneMIB | 3 | 44 | This MIB module defines objects that manages flow cloning feature. A flow cloning can be described as a hardware or software enti… |
1.3.6.1.4.1.9.9.766 | ciscoIpslaVideoProfileMIB | 3 | 29 | IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, net… |
1.3.6.1.4.1.9.9.767 | ciscoLwappDot11ClientRmMIB | 3 | 64 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.768 | ciscoEntitySensorHistoryMIB | 2 | 20 | This MIB module defines objects that describe collections and measurement information for each sensor supporting historical data … |
1.3.6.1.4.1.9.9.769 | ciscoMediaQualityMIB | 3 | 214 | This MIB module enhances the DIAL-CONTROL-MIB (RFC2128) by providing call information and voice and video quality statistics of c… |
1.3.6.1.4.1.9.9.770 | ciscoTcpMetricsMIB | 4 | 22 | This MIB module defines objects that describe the quality metrics of TCP streams. GLOSSARY ============ Flow Monitor - a hardware o… |
1.3.6.1.4.1.9.9.771 | ciscoMediaMetricsMIB | 4 | 38 | This MIB module defines objects that describe the quality metrics of Media streams. GLOSSARY ============ Flow Monitor - a hardware… |
1.3.6.1.4.1.9.9.772 | ciscoPfrMIB | 3 | 303 | This MIB module defines objects that describe Performance Routing (PfR). Standard routing protocols base routing decisions on re… |
1.3.6.1.4.1.9.9.773 | ciscoSwitchRateLimiterMIB | 3 | 28 | This MIB module defines management objects for the Switch Rate Limiter features on Cisco Layer 2 and Layer 3 devices. Rate limits … |
1.3.6.1.4.1.9.9.774 | ciscoVdcMIB | 3 | 90 | CISCO-VDC-MIB |
1.3.6.1.4.1.9.9.775 | ciscoSelectiveVrfDownloadMIB | 3 | 41 | This MIB module defines objects describing selective VRF download. The selective VRF download feature makes a best effort to dow… |
1.3.6.1.4.1.9.9.776 | ciscoNetflowLiteMIB | 3 | 56 | This MIB provides a method to configure Netflow-lite feature and get information in these areas: 1. Exporter config information a… |
1.3.6.1.4.1.9.9.777 | ciscoDsgIfExtMIB | 3 | 15 | A MIB module for extending the DSG-IF-MIB (ITU-T J.128 10/2008) to add objects which provide additional management information ab… |
1.3.6.1.4.1.9.9.779 | ciscoPmonMIB | 3 | 14 | This MIB module is for providing the port monitoring information. |
1.3.6.1.4.1.9.9.782 | ciscoSubscriberIdentityTcMIB | 0 | 0 | This MIB module defines textual conventions describing subscriber session identities. A subscriber session identity consists of … |
1.3.6.1.4.1.9.9.783 | ciscoDynamicTemplateTcMIB | 0 | 0 | This MIB module defines textual conventions used by the CISCO-DYNAMIC-TEMPLATE-MIB and MIB modules that use and expand on dynamic… |
1.3.6.1.4.1.9.9.784 | ciscoDynamicTemplateMIB | 3 | 152 | This MIB defines objects that describe dynamic templates. A dynamic template is a set of configuration attributes that a system … |
1.3.6.1.4.1.9.9.785 | ciscoSubscriberSessionTcMIB | 0 | 0 | This MIB module defines textual conventions describing subscriber sessions. |
1.3.6.1.4.1.9.9.786 | ciscoSubscriberSessionMIB | 3 | 187 | This MIB defines objects describing subscriber sessions, or more specifically, subscriber sessions terminated by a RAS. A subscr… |
1.3.6.1.4.1.9.9.789 | ciscoFlowMetadataMIB | 3 | 30 | The MIB module for managing Cisco medianet flow metadata. Metadata, in the simplest form, is data that qualifies other data. Flow… |
1.3.6.1.4.1.9.9.790 | ciscoSwitchCefMIB | 3 | 33 | This MIB module defines management objects for the CEF features on Cisco Layer 2 and Layer 3 devices. Definition of some of the t… |
1.3.6.1.4.1.9.9.791 | ciscoAppNavMIB | 2 | 51 | This MIB module defines SNMP management objects describing the AppNav technology. A device, which implements the AppNav technolog… |
1.3.6.1.4.1.9.9.793 | ciscoMspMIB | 3 | 54 | Objective of media services proxy is to provide media services to end-points and its flows identified by a set of protocols. Medi… |
1.3.6.1.4.1.9.9.798 | ciscoLocalAuthUserMIB | 3 | 40 | This MIB module defines objects describing users authenticated locally by a Network Access Server (NAS). + | | | … |
1.3.6.1.4.1.9.9.800 | ciscoMediatraceMIB | 3 | 191 | Mediatrace helps to isolate and troubleshoot network degradation problems by enabling a network administrator to discover an Inte… |
1.3.6.1.4.1.9.9.801 | ciscoFabricPathTopologyMIB | 3 | 40 | This MIB module defines managed objects that facilitate the management of Cisco's FabricPath Topology technology. |
1.3.6.1.4.1.9.9.803 | ciscoSwitchFabricMIB | 3 | 30 | This MIB module defined managed objects that facilitates the management of switching fabric information in a Cisco switch. |
1.3.6.1.4.1.9.9.804 | ciscoHardwareIpVerifyMIB | 3 | 13 | This MIB module defines management objects for configuration and monitoring of the Intrusion Detection System (IDS) that checks f… |
1.3.6.1.4.1.9.9.806 | ciscoL2natMIB | 2 | 80 | Network Address Translation (NAT) involves translating the source and or destination IP addresses of packets as they traverse fro… |
1.3.6.1.4.1.9.9.807 | ciscoVpcMIB | 3 | 73 | This MIB module defines MIB objects which provide management information for configuring and monitoring of Virtual Port Channel(V… |
1.3.6.1.4.1.9.9.808 | ciscoACLMIB | 2 | 87 | This MIB module defines objects that describe Cisco Access Control Lists (ACL). This MIB describes different objects that enable … |
1.3.6.1.4.1.9.9.809 | ciscoWebExMeetingMIB | 3 | 58 | Cisco WebEx Collaboration Host is a software-only system, with hardware independence a key goal. To that end, it will be designed… |
1.3.6.1.4.1.9.9.810 | ciscoOtvMIB | 3 | 129 | This MIB module is for configuration & statistic query of Overlay Transport Virtualization (OTV) functionality on Cisco routers a… |
1.3.6.1.4.1.9.9.811 | ciscoVlanIfTableRelationshipMIB | 1 | 12 | None |
1.3.6.1.4.1.9.9.813 | ciscoPfcExtMIB | 3 | 27 | This MIB module defines management objects for monitoring information of Priority-based Flow Control. The following terms are used… |
1.3.6.1.4.1.9.9.814 | ciscoLivedataMIB | 3 | 57 | Cisco LiveData is the next generation reporting product for Cisco Unified Contact Center Enterprise (CCE). Cisco LiveData provid… |
1.3.6.1.4.1.9.9.816 | ciscoVpnLicUsageMonitorMIB | 2 | 60 | Acronyms and Definitions The following acronyms and terms are used in this document: IPSec: Secure IP Protocol VPN: Virtual Priva… |
1.3.6.1.4.1.9.9.817 | ciscoWanCellExtMIB | 3 | 81 | This MIB module is an extension of CISCO-WAN-3G-MIB.my, and it provides network management support for Cisco cellular WAN 4G/LTE p… |
1.3.6.1.4.1.9.9.818 | ciscoNatCgnExtMIB | 3 | 69 | This MIB module extends the IETF draft NAT MIB available at http://tools.ietf.org/html/draft-ietf-behave-nat-mib-11 The extension… |
1.3.6.1.4.1.9.9.819 | ciscoWpanMIB | 3 | 25 | This MIB module defines management objects for configuration and monitoring of Wireless Personal Area Network (WPAN). Personal Are… |
1.3.6.1.4.1.9.9.820 | ciscoNetworkVirtualizationOverlayMIB | 3 | 61 | This MIB module is for managing Network Virtualization Overlay functionality on Cisco devices. The following terms are used throu… |
1.3.6.1.4.1.9.9.821 | ciscoCableIronBusStatMIB | 3 | 22 | This is the MIB module for Cable Iron Bus Statistics for DOCSIS-compliant Cable Modem Termination Systems (CMTS). The Statistics … |
1.3.6.1.4.1.9.9.822 | ciscoDtiExtMIB | 3 | 12 | This MIB module provides the trap objects necessary to monitor the DOCSIS Timing Interface devices. |
1.3.6.1.4.1.9.9.824 | ciscoQpLbgMIB | 3 | 74 | This MIB module represents the Qam-Partition (QP) and Load Balance Group (LBG) parameters in the headend and it is supported by … |
1.3.6.1.4.1.9.9.825 | ciscoLispExtMIB | 3 | 77 | This MIB is an extension to the IETF LISP-MIB module defined in RFC 7052. It contains Cisco defined managed objects and traps to … |
1.3.6.1.4.1.9.9.827 | ciscoUspMIB | 3 | 80 | The MIB Module for the management of the Cisco Unified SIP Proxy (CUSP) service. CUSP is a Session Initiation Protocol (SIP) prox… |
1.3.6.1.4.1.9.9.828 | ciscoOpticalMIB | 3 | 176 | This MIB module defines the managed objects for physical layer characteristics of optical interfaces and performance statistics o… |
1.3.6.1.4.1.9.9.829 | ciscoSslvpnMIB | 3 | 53 | This MIB module defines management objects for configuration and monitoring of the Cisco secure gateway that implements SSLVPN. Gl… |
1.3.6.1.4.1.9.9.831 | ciscoSmartLicMIB | 3 | 78 | The MIB module for managing licenses on the system. The licensing mechanism provides flexibility to enforce licensing for various… |
... |