Current NTP stratum level. This is an integer
indicating the stratum of the local clock with
values defined as follows:
================================================
0 unspecified
1 primary reference (e.g., calibrated atomic
clock, radio clock)
2-255 secondary reference (via NTP)
================================================
Parsed from file SYMM-SMI.mib
Module: SYMM-SMI
Vendor: Symmetricom
Module: SYMM-SMI
[Automatically extracted from oidview.com]
ntpSysStratum OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Current NTP stratum level. This is an integer indicating the stratum of the local clock with values defined as follows: ================================================ 0 unspecified 1 primary reference (e.g., calibrated atomic clock, radio clock) 2-255 secondary reference (via NTP) ================================================" ::= {ntpSystem 2}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.1 | ntpSysLeap | 0 | 0 | NTP Leap Indicator. This is a two-bit code warning of an impending leap second to be inserted into the NTP timescale. The bits … |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.3 | ntpSysPrecision | 0 | 0 | Current NTP precision value. This is a signed integer indicating the precision of the various clocks, in seconds to the nearest … |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.4 | ntpSysRootDelay | 0 | 0 | Total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.5 | ntpSysRootDispersion | 0 | 0 | Maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds. Only positive valu… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.6 | ntpSysRefID | 0 | 0 | NTP Reference Clock Identifier. This is a 32 bit code identifying the particular reference clock. In the case of stratum 0 (uns… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.7 | ntpSysRefTime | 0 | 0 | ntpSysReftime |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.8 | ntpSysPoll | 0 | 0 | Minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of six indicates a minimum in… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.9 | ntpSysPeer | 0 | 0 | Current synchronization source. In stratum > 1 this variable returns the decimal representation of the IPv4 address of its curre… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.10 | ntpSysPhase | 0 | 0 | System clock offset from the selected source. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.11 | ntpSysFreq | 0 | 0 | System clock frequency correction from ntpd. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.12 | ntpSysError | 0 | 0 | Current system error from ntpd. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.13 | ntpSysClock | 0 | 0 | Current system time from ntpd. This is usually derived from the hardware clock but could be from any other ntp source. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.14 | ntpSysSystem | 0 | 0 | Description of the current system. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.15 | ntpSysProcessor | 0 | 0 | Type of local processor. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.16 | ntpSysNotrust | 0 | 0 | Force authentication. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.17 | ntpSysPktsReceived | 0 | 0 | This variable is a rollover counter which reflects the number of ntp packets received by the SyncServer. It is valid for all vers… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.18 | ntpSysMode | 0 | 0 | An integer indicating the NTP association mode and are coded as follows: ============================================ 0 unsp… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.19 | ntpSysVersion | 0 | 0 | The version of the NTP daemon on the system. |