config OBJECT IDENTIFIER ::= { admin 1 }
Vendor: Sigma Network Systems, Inc.
Module: CTATX-MIB
[Automatically extracted from oidview.com]
config OBJECT IDENTIFIER ::= { admin 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.3.3.1.1 | configFatalErr | 1 | 1 | This is a 32 byte array which contains information about the cause of the previous system reset. This will describe the circumsta… |
| 1.3.6.1.4.1.97.3.3.1.2 | configAnyPass | 1 | 1 | The authentication password (0-24 bytes) which must match the community name in an SNMP PDU, in order for the operation to be per… |
| 1.3.6.1.4.1.97.3.3.1.3 | configGetPass | 1 | 1 | The authentication password (0-24 bytes) which must match the community name in an SNMP Get PDU (except for Debug or password par… |
| 1.3.6.1.4.1.97.3.3.1.4 | configNMSAddress | 1 | 1 | The address of the NMS to which Trap PDUs are to be sent. A value of zero indicates that Trap PDUs should be sent to the NMS last… |
| 1.3.6.1.4.1.97.3.3.1.5 | configFunctions | 1 | 1 | A bit field which describes the software functions supported by this ES/1. The possible values are: 0x0001 NMS, 0x0002 TBRIDG… |
| 1.3.6.1.4.1.97.3.3.1.6 | configPowerAc1 | 1 | 1 | Whether the first power supply has AC input. |
| 1.3.6.1.4.1.97.3.3.1.7 | configPowerAc2 | 1 | 1 | Whether the second power supply has AC input. |
| 1.3.6.1.4.1.97.3.3.1.8 | configPowerDc1 | 1 | 1 | Whether the first power supply provides DC voltage. |
| 1.3.6.1.4.1.97.3.3.1.9 | configPowerDc2 | 1 | 1 | Whether the second power supply provides DC voltage. |
| 1.3.6.1.4.1.97.3.3.1.10 | configPowerPresent1 | 1 | 1 | Whether the first power supply is present. |
| 1.3.6.1.4.1.97.3.3.1.11 | configPowerPresent2 | 1 | 1 | Whether the second power supply is present. |
| 1.3.6.1.4.1.97.3.3.1.12 | configAlarmDynamic | 1 | 1 | Whether changes in dynamic parameters (except for the dynamically learned addresses) should cause enterprise specific trap PDUs t… |
| 1.3.6.1.4.1.97.3.3.1.13 | configAlarmAddresses | 1 | 1 | Whether changes in the dynamically learned addresses should cause enterprise specific trap PDUs to be generated. |
| 1.3.6.1.4.1.97.3.3.1.14 | configStorageFailure | 1 | 1 | Whether the ES/1's storage facility for its configuration parameters has failed (the ES/1 may not be able to reboot after such a … |
| 1.3.6.1.4.1.97.3.3.1.15 | configAuthenticationFailure | 1 | 1 | All nulls, or the IP source address within the last SNMP PDU which caused an SNMP authentication failure. |
| 1.3.6.1.4.1.97.3.3.1.16 | configFddiPriority | 1 | 1 | Priority to use when forwarding packets to any FDDI port from any non-FDDI port. |
| 1.3.6.1.4.1.97.3.3.1.17 | configTprPriority | 1 | 1 | Priority to use when forwarding packets to any Token-Ring port from any non-Token-Ring port. |
| 1.3.6.1.4.1.97.3.3.1.19 | configDumpModule | 1 | 1 | Flag to select the module to dump on a crash. If set to a value of 1 to 7 the relevant module's memory will be sent to the UART p… |
| 1.3.6.1.4.1.97.3.3.1.20 | configDumpStart | 1 | 1 | Starting address of memory to dump upon detecting a fatal error. |
| 1.3.6.1.4.1.97.3.3.1.21 | configDumpEnd | 1 | 1 | Ending address of memory to dump upon detecting a fatal error. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.3.3.2 | lma | 2 | 4 | None |
| 1.3.6.1.4.1.97.3.3.3 | ppe | 49 | 98 | None |
| 1.3.6.1.4.1.97.3.3.4 | st | 16 | 32 | None |
| 1.3.6.1.4.1.97.3.3.5 | mesh | 6 | 12 | None |