Reference record for OID 1.0.8802.17.1.1.1.1.1.1.12


parent
1.0.8802.17.1.1.1.1.1.1 (rprIfEntry)
node code
12
node name
rprIfSTQFullThreshold
dot oid
1.0.8802.17.1.1.1.1.1.1.12
type
OBJECT-TYPE
asn1 oid
  • {iso(1) standard(0) iso8802(8802) ieee802dot17(17) ieee802dot17mibs(1) ieee802dot17rprMIB(1) rprObjects(1) rprGeneral(1) rprIfTable(1) rprIfEntry(1) rprIfSTQFullThreshold(12)}
  • {iso(1) std(0) iso8802(8802) ieee802dot17(17) ieee802dot17mibs(1) ieee802dot17rprMIB(1) rprObjects(1) rprGeneral(1) rprIfTable(1) rprIfEntry(1) rprIfSTQFullThreshold(12)}
    • iri oid
  • /iso/standard/iso8802/ieee802dot17/ieee802dot17mibs/ieee802dot17rprMIB/rprObjects/rprGeneral/rprIfTable/rprIfEntry/rprIfSTQFullThreshold
  • /iso/std/iso8802/ieee802dot17/ieee802dot17mibs/ieee802dot17rprMIB/rprObjects/rprGeneral/rprIfTable/rprIfEntry/rprIfSTQFullThreshold
    • iri by oid_info
    /ISO/Standard/8802/17/1/1/1/1/1/1/12

    Description by circitor

    A level of STQ occupancy at or above which the STQ
    is almost full.

    This attribute specifies the full threshold location
    in MTU units below the STQ size.
    The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
    The default value for stqFullThreshold is sizeSTQ - 2*mtuSize.

    Parsed from file IEEE-802DOT17-RPR-MIB.mib
    Module: IEEE-802DOT17-RPR-MIB

    Description by cisco_v1

    A level of STQ occupancy at or above which the STQ
    is almost full.

    This attribute specifies the full threshold location
    in MTU units below the STQ size.
    The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
    The default value for stqFullThreshold is sizeSTQ - 2*mtuSize.

    Description by mibdepot

    A level of STQ occupancy at or above which the STQ
    is almost full.
    This attribute specifies the full threshold location
    in MTU units below the STQ size.
    The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
    The default value for stqFullThreshold is sizeSTQ - 2*mtuSize.

    Parsed from file IEEE-802DOT17-RPR-MIB.mib.txt
    Company: None
    Module: IEEE-802DOT17-RPR-MIB

    Description by cisco

    A level of STQ occupancy at or above which the STQ
    is almost full.

    This attribute specifies the full threshold location
    in MTU units below the STQ size.
    The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
    The default value for stqFullThreshold is sizeSTQ - 2*mtuSize.

    Information by circitor

    rprIfSTQFullThreshold OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "MTUs"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "A level of STQ occupancy at or above which the STQ 
         is almost full.

         This attribute specifies the full threshold location
         in MTU units below the STQ size.
         The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
         The default value for stqFullThreshold is sizeSTQ - 2*mtuSize."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.2, stqFullThreshold"
    DEFVAL { 2 }
    ::= { rprIfEntry 12 }

    Information by cisco_v1

    rprIfSTQFullThreshold OBJECT-TYPE
    SYNTAX Gauge


    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A level of STQ occupancy at or above which the STQ 
         is almost full.
        
         This attribute specifies the full threshold location
         in MTU units below the STQ size.
         The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
         The default value for stqFullThreshold is sizeSTQ - 2*mtuSize."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.2, stqFullThreshold"
    DEFVAL { 2 }
    ::= { rprIfEntry 12 }

    Information by oid_info

    Vendor: Cisco Systems
    Module: IEEE-802DOT17-RPR-MIB (IEEE-802DOT17-RPR-MIB-V1SMI.my)
    Type: TABULAR
    Access: read-write
    Syntax: Gauge

    Automatically extracted from www.mibdepot.com

    Information by mibdepot

    rprIfSTQFullThreshold OBJECT-TYPE
        SYNTAX Unsigned32
        UNITS "MTUs"
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "A level of STQ occupancy at or above which the STQ
            is almost full.
            This attribute specifies the full threshold location
            in MTU units below the STQ size.
            The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
            The default value for stqFullThreshold is sizeSTQ - 2*mtuSize."
        REFERENCE
            "IEEE 802.17 Subclause 7.2.2, stqFullThreshold"
        DEFVAL { 2 }
        ::= { rprIfEntry 12 }

    Information by cisco

    rprIfSTQFullThreshold OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "MTUs"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "A level of STQ occupancy at or above which the STQ 
         is almost full.

         This attribute specifies the full threshold location
         in MTU units below the STQ size.
         The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
         The default value for stqFullThreshold is sizeSTQ - 2*mtuSize."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.2, stqFullThreshold"
    DEFVAL { 2 }
    ::= { rprIfEntry 12 }

    Current Registration Authority (recovered by parent 1.0)

    ISO and IEC

    Brothers (20)

    OIDNameSub childrenSub Nodes TotalDescription
    1.0.8802.17.1.1.1.1.1.1.1 rprIfIndex 0 0 The ifIndex of this RPR interface.
    1.0.8802.17.1.1.1.1.1.1.2 rprIfStationsOnRing 0 0 The number of stations on the RPR ring.
    When the operStatus of the interface is down the value is 1.
    1.0.8802.17.1.1.1.1.1.1.3 rprIfReversionMode 0 0 The reversion mode of the MAC,
    False for non-revertive
    True for revertive.
    Revertive station will return to idle state after
    WTR in…
    1.0.8802.17.1.1.1.1.1.1.4 rprIfProtectionWTR 0 0 Indicates the length of time in seconds, to remain in the
    protection state, after the cause of an automatic
    protection is removed…
    1.0.8802.17.1.1.1.1.1.1.5 rprIfProtectionFastTimer 0 0 Indicates the protection messages fast timer value in 1 ms units.
    The fast timer is used for protection protocols.
    Default value …
    1.0.8802.17.1.1.1.1.1.1.6 rprIfProtectionSlowTimer 0 0 Indicates the protection slow timer value in 50 ms units.
    The slow timer is used for topology and protection protocols.
    Default v…
    1.0.8802.17.1.1.1.1.1.1.7 rprIfAtdTimer 0 0 Indicates the timer period for ATD message transmissions.
    Default value is 20 units of 50 ms, i.e. 1sec.
    1.0.8802.17.1.1.1.1.1.1.8 rprIfKeepaliveTimeout 0 0 Indicates the timer to declare keepalive timeout, multiples
    of 1 millisecond.
    Default value for keepalive timeout is 3 ms.
    1.0.8802.17.1.1.1.1.1.1.9 rprIfFairnessAggressive 0 0 Indicates whether the selected RPR fairness algorithm is
    aggressive or conservative.
    If true, the selected fairness mode is aggre…
    1.0.8802.17.1.1.1.1.1.1.10 rprIfPtqSize 0 0 The size in bytes of the Primary Transit Queue per ringlet
    supported by this RPR MAC.
    1.0.8802.17.1.1.1.1.1.1.11 rprIfStqSize 0 0 The size in bytes of the Secondary Transit Queue per ringlet
    supported by this RPR MAC.
    1.0.8802.17.1.1.1.1.1.1.13 rprIfIdleThreshold 0 0 Indicates that a MAC is experiencing an adverse rate
    mismatch. When the PTQ depth exceeds this value,
    the incoming link is consid…
    1.0.8802.17.1.1.1.1.1.1.14 rprIfSesThreshold 0 0 Indicates the number of E-RPR errors to declare
    a second as SES-RPR
    The default value is the rounded integer of
    0.000001 * (lineRa…
    1.0.8802.17.1.1.1.1.1.1.15 rprIfWrapConfig 0 0 Indicates the configured protection mode,
    steering or wrapping, in a MAC that supports both modes.
    If wrap configured bit is set,…
    1.0.8802.17.1.1.1.1.1.1.16 rprIfJumboFramePreferred 0 0 Indicates the preference of the manager to support jumbo frame
    in a MAC that supports jumbo frame.
    The station advertises the 'lo…
    1.0.8802.17.1.1.1.1.1.1.17 rprIfMacOperModes 0 0 The summary of the Mac operational modes.
    if strictOrder is set, the MAC operates in strict order mode.
    if dropBadFcs is set, fra…
    1.0.8802.17.1.1.1.1.1.1.18 rprIfRingOperModes 0 0 The summary of the ring operational modes
    collected through the topology discovery protocol.
    If at least one station doesn't supp…
    1.0.8802.17.1.1.1.1.1.1.19 rprIfCurrentStatus 0 0 Indicates the current status of the RPR interface.
    this attribute is used to generate alarm to the management system.
    1.0.8802.17.1.1.1.1.1.1.20 rprIfLastChange 0 0 The value of sysUpTime at the time when any of the following
    attributes changes:
    rprIfStationsOnRing, rprIfReversionMode, rprIfPr…
    1.0.8802.17.1.1.1.1.1.1.21 rprIfChanges 0 0 Indicates number of times rprIfLastChange changed.
    The discontinued counter value is indicated
    by the ifCounterDiscontinuityTime …