Indicates the protection messages fast timer value in 1 ms units.
The fast timer is used for protection protocols.
Default value for fast timer protection messages is 10 ms.
Parsed from file IEEE-802DOT17-RPR-MIB.mib
Module: IEEE-802DOT17-RPR-MIB
Indicates the protection messages fast timer value in 1 ms units.
The fast timer is used for protection protocols.
Default value for fast timer protection messages is 10 ms.
Indicates the protection messages fast timer value in 1 ms units.
The fast timer is used for protection protocols.
Default value for fast timer protection messages is 10 ms.
Parsed from file IEEE-802DOT17-RPR-MIB.mib.txt
Company: None
Module: IEEE-802DOT17-RPR-MIB
Indicates the protection messages fast timer value in 1 ms units.
The fast timer is used for protection protocols.
Default value for fast timer protection messages is 10 ms.
rprIfProtectionFastTimer OBJECT-TYPE SYNTAX Unsigned32 (1..20) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the protection messages fast timer value in 1 ms units. The fast timer is used for protection protocols. Default value for fast timer protection messages is 10 ms." REFERENCE "IEEE 802.17 Subclause 11.2.3, txFastTimeout" DEFVAL { 10 } ::= { rprIfEntry 5 }
rprIfProtectionFastTimer OBJECT-TYPE SYNTAX Gauge(1..20) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the protection messages fast timer value in 1 ms units. The fast timer is used for protection protocols. Default value for fast timer protection messages is 10 ms." REFERENCE "IEEE 802.17 Subclause 11.2.3, txFastTimeout" DEFVAL { 10 } ::= { rprIfEntry 5 }
Vendor: Cisco Systems
Module: IEEE-802DOT17-RPR-MIB (IEEE-802DOT17-RPR-MIB-V1SMI.my)
Type: TABULAR
Access: read-write
Syntax: Gauge
(
1..20 )
Automatically extracted from www.mibdepot.com
rprIfProtectionFastTimer OBJECT-TYPE SYNTAX Unsigned32 (1..20) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the protection messages fast timer value in 1 ms units. The fast timer is used for protection protocols. Default value for fast timer protection messages is 10 ms." REFERENCE "IEEE 802.17 Subclause 11.2.3, txFastTimeout" DEFVAL { 10 } ::= { rprIfEntry 5 }
rprIfProtectionFastTimer OBJECT-TYPE SYNTAX Unsigned32 (1..20) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the protection messages fast timer value in 1 ms units. The fast timer is used for protection protocols. Default value for fast timer protection messages is 10 ms." REFERENCE "IEEE 802.17 Subclause 11.2.3, txFastTimeout" DEFVAL { 10 } ::= { rprIfEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.0.8802.17.1.1.1.1.1.1.1 | rprIfIndex | 0 | 0 | The ifIndex of this RPR interface. |
1.0.8802.17.1.1.1.1.1.1.2 | rprIfStationsOnRing | 0 | 0 | The number of stations on the RPR ring. When the operStatus of the interface is down the value is 1. |
1.0.8802.17.1.1.1.1.1.1.3 | rprIfReversionMode | 0 | 0 | The reversion mode of the MAC, False for non-revertive True for revertive. Revertive station will return to idle state after WTR in… |
1.0.8802.17.1.1.1.1.1.1.4 | rprIfProtectionWTR | 0 | 0 | Indicates the length of time in seconds, to remain in the protection state, after the cause of an automatic protection is removed… |
1.0.8802.17.1.1.1.1.1.1.6 | rprIfProtectionSlowTimer | 0 | 0 | Indicates the protection slow timer value in 50 ms units. The slow timer is used for topology and protection protocols. Default v… |
1.0.8802.17.1.1.1.1.1.1.7 | rprIfAtdTimer | 0 | 0 | Indicates the timer period for ATD message transmissions. Default value is 20 units of 50 ms, i.e. 1sec. |
1.0.8802.17.1.1.1.1.1.1.8 | rprIfKeepaliveTimeout | 0 | 0 | Indicates the timer to declare keepalive timeout, multiples of 1 millisecond. Default value for keepalive timeout is 3 ms. |
1.0.8802.17.1.1.1.1.1.1.9 | rprIfFairnessAggressive | 0 | 0 | Indicates whether the selected RPR fairness algorithm is aggressive or conservative. If true, the selected fairness mode is aggre… |
1.0.8802.17.1.1.1.1.1.1.10 | rprIfPtqSize | 0 | 0 | The size in bytes of the Primary Transit Queue per ringlet supported by this RPR MAC. |
1.0.8802.17.1.1.1.1.1.1.11 | rprIfStqSize | 0 | 0 | The size in bytes of the Secondary Transit Queue per ringlet supported by this RPR MAC. |
1.0.8802.17.1.1.1.1.1.1.12 | rprIfSTQFullThreshold | 0 | 0 | A level of STQ occupancy at or above which the STQ is almost full. This attribute specifies the full threshold location in MTU uni… |
1.0.8802.17.1.1.1.1.1.1.13 | rprIfIdleThreshold | 0 | 0 | Indicates that a MAC is experiencing an adverse rate mismatch. When the PTQ depth exceeds this value, the incoming link is consid… |
1.0.8802.17.1.1.1.1.1.1.14 | rprIfSesThreshold | 0 | 0 | Indicates the number of E-RPR errors to declare a second as SES-RPR The default value is the rounded integer of 0.000001 * (lineRa… |
1.0.8802.17.1.1.1.1.1.1.15 | rprIfWrapConfig | 0 | 0 | Indicates the configured protection mode, steering or wrapping, in a MAC that supports both modes. If wrap configured bit is set,… |
1.0.8802.17.1.1.1.1.1.1.16 | rprIfJumboFramePreferred | 0 | 0 | Indicates the preference of the manager to support jumbo frame in a MAC that supports jumbo frame. The station advertises the 'lo… |
1.0.8802.17.1.1.1.1.1.1.17 | rprIfMacOperModes | 0 | 0 | The summary of the Mac operational modes. if strictOrder is set, the MAC operates in strict order mode. if dropBadFcs is set, fra… |
1.0.8802.17.1.1.1.1.1.1.18 | rprIfRingOperModes | 0 | 0 | The summary of the ring operational modes collected through the topology discovery protocol. If at least one station doesn't supp… |
1.0.8802.17.1.1.1.1.1.1.19 | rprIfCurrentStatus | 0 | 0 | Indicates the current status of the RPR interface. this attribute is used to generate alarm to the management system. |
1.0.8802.17.1.1.1.1.1.1.20 | rprIfLastChange | 0 | 0 | The value of sysUpTime at the time when any of the following attributes changes: rprIfStationsOnRing, rprIfReversionMode, rprIfPr… |
1.0.8802.17.1.1.1.1.1.1.21 | rprIfChanges | 0 | 0 | Indicates number of times rprIfLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime … |