Indicates the preference of the manager to support jumbo frame
in a MAC that supports jumbo frame.
The station advertises the 'logical and' of rprIfJumboFramePreferred
and jumbo capable bit in the rprIfMacCapability.
Default value for jumbo frame preferred is true. i.e. station
supports jumbo frame.
Parsed from file IEEE-802DOT17-RPR-MIB.mib
Module: IEEE-802DOT17-RPR-MIB
Indicates the preference of the manager to support jumbo frame
in a MAC that supports jumbo frame.
The station advertises the 'logical and' of rprIfJumboFramePreferred
and jumbo capable bit in the rprIfMacCapability.
Default value for jumbo frame preferred is true. i.e. station
supports jumbo frame.
Indicates the preference of the manager to support jumbo frame
in a MAC that supports jumbo frame.
The station advertises the 'logical and' of rprIfJumboFramePreferred
and jumbo capable bit in the rprIfMacCapability.
Default value for jumbo frame preferred is true. i.e. station
supports jumbo frame.
Parsed from file IEEE-802DOT17-RPR-MIB.mib.txt
Company: None
Module: IEEE-802DOT17-RPR-MIB
Indicates the preference of the manager to support jumbo frame
in a MAC that supports jumbo frame.
The station advertises the 'logical and' of rprIfJumboFramePreferred
and jumbo capable bit in the rprIfMacCapability.
Default value for jumbo frame preferred is true. i.e. station
supports jumbo frame.
rprIfJumboFramePreferred OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the preference of the manager to support jumbo frame in a MAC that supports jumbo frame. The station advertises the 'logical and' of rprIfJumboFramePreferred and jumbo capable bit in the rprIfMacCapability. Default value for jumbo frame preferred is true. i.e. station supports jumbo frame." REFERENCE "IEEE 802.17 Subclause 11.2.5, jumboPrefer" DEFVAL { true } ::= { rprIfEntry 16 }
rprIfJumboFramePreferred OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the preference of the manager to support jumbo frame in a MAC that supports jumbo frame. The station advertises the 'logical and' of rprIfJumboFramePreferred and jumbo capable bit in the rprIfMacCapability. Default value for jumbo frame preferred is true. i.e. station supports jumbo frame." REFERENCE "IEEE 802.17 Subclause 11.2.5, jumboPrefer" DEFVAL { true } ::= { rprIfEntry 16 }
Vendor: Cisco Systems
Module: IEEE-802DOT17-RPR-MIB (IEEE-802DOT17-RPR-MIB-V1SMI.my)
Type: TABULAR
Access: read-write
Syntax: TruthValue
Automatically extracted from www.mibdepot.com
rprIfJumboFramePreferred OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the preference of the manager to support jumbo frame in a MAC that supports jumbo frame. The station advertises the 'logical and' of rprIfJumboFramePreferred and jumbo capable bit in the rprIfMacCapability. Default value for jumbo frame preferred is true. i.e. station supports jumbo frame." REFERENCE "IEEE 802.17 Subclause 11.2.5, jumboPrefer" DEFVAL { true } ::= { rprIfEntry 16 }
rprIfJumboFramePreferred OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the preference of the manager to support jumbo frame in a MAC that supports jumbo frame. The station advertises the 'logical and' of rprIfJumboFramePreferred and jumbo capable bit in the rprIfMacCapability. Default value for jumbo frame preferred is true. i.e. station supports jumbo frame." REFERENCE "IEEE 802.17 Subclause 11.2.5, jumboPrefer" DEFVAL { true } ::= { rprIfEntry 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.0.8802.17.1.1.1.1.1.1.1 | rprIfIndex | 0 | 0 | The ifIndex of this RPR interface. |
1.0.8802.17.1.1.1.1.1.1.2 | rprIfStationsOnRing | 0 | 0 | The number of stations on the RPR ring. When the operStatus of the interface is down the value is 1. |
1.0.8802.17.1.1.1.1.1.1.3 | rprIfReversionMode | 0 | 0 | The reversion mode of the MAC, False for non-revertive True for revertive. Revertive station will return to idle state after WTR in… |
1.0.8802.17.1.1.1.1.1.1.4 | rprIfProtectionWTR | 0 | 0 | Indicates the length of time in seconds, to remain in the protection state, after the cause of an automatic protection is removed… |
1.0.8802.17.1.1.1.1.1.1.5 | rprIfProtectionFastTimer | 0 | 0 | Indicates the protection messages fast timer value in 1 ms units. The fast timer is used for protection protocols. Default value … |
1.0.8802.17.1.1.1.1.1.1.6 | rprIfProtectionSlowTimer | 0 | 0 | Indicates the protection slow timer value in 50 ms units. The slow timer is used for topology and protection protocols. Default v… |
1.0.8802.17.1.1.1.1.1.1.7 | rprIfAtdTimer | 0 | 0 | Indicates the timer period for ATD message transmissions. Default value is 20 units of 50 ms, i.e. 1sec. |
1.0.8802.17.1.1.1.1.1.1.8 | rprIfKeepaliveTimeout | 0 | 0 | Indicates the timer to declare keepalive timeout, multiples of 1 millisecond. Default value for keepalive timeout is 3 ms. |
1.0.8802.17.1.1.1.1.1.1.9 | rprIfFairnessAggressive | 0 | 0 | Indicates whether the selected RPR fairness algorithm is aggressive or conservative. If true, the selected fairness mode is aggre… |
1.0.8802.17.1.1.1.1.1.1.10 | rprIfPtqSize | 0 | 0 | The size in bytes of the Primary Transit Queue per ringlet supported by this RPR MAC. |
1.0.8802.17.1.1.1.1.1.1.11 | rprIfStqSize | 0 | 0 | The size in bytes of the Secondary Transit Queue per ringlet supported by this RPR MAC. |
1.0.8802.17.1.1.1.1.1.1.12 | rprIfSTQFullThreshold | 0 | 0 | A level of STQ occupancy at or above which the STQ is almost full. This attribute specifies the full threshold location in MTU uni… |
1.0.8802.17.1.1.1.1.1.1.13 | rprIfIdleThreshold | 0 | 0 | Indicates that a MAC is experiencing an adverse rate mismatch. When the PTQ depth exceeds this value, the incoming link is consid… |
1.0.8802.17.1.1.1.1.1.1.14 | rprIfSesThreshold | 0 | 0 | Indicates the number of E-RPR errors to declare a second as SES-RPR The default value is the rounded integer of 0.000001 * (lineRa… |
1.0.8802.17.1.1.1.1.1.1.15 | rprIfWrapConfig | 0 | 0 | Indicates the configured protection mode, steering or wrapping, in a MAC that supports both modes. If wrap configured bit is set,… |
1.0.8802.17.1.1.1.1.1.1.17 | rprIfMacOperModes | 0 | 0 | The summary of the Mac operational modes. if strictOrder is set, the MAC operates in strict order mode. if dropBadFcs is set, fra… |
1.0.8802.17.1.1.1.1.1.1.18 | rprIfRingOperModes | 0 | 0 | The summary of the ring operational modes collected through the topology discovery protocol. If at least one station doesn't supp… |
1.0.8802.17.1.1.1.1.1.1.19 | rprIfCurrentStatus | 0 | 0 | Indicates the current status of the RPR interface. this attribute is used to generate alarm to the management system. |
1.0.8802.17.1.1.1.1.1.1.20 | rprIfLastChange | 0 | 0 | The value of sysUpTime at the time when any of the following attributes changes: rprIfStationsOnRing, rprIfReversionMode, rprIfPr… |
1.0.8802.17.1.1.1.1.1.1.21 | rprIfChanges | 0 | 0 | Indicates number of times rprIfLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime … |