Reference record for OID 1.3.6.1.2.1.10.133.1.8.2.1.7



parent
1.3.6.1.2.1.10.133.1.8.2.1 (optIfODUkTtpConfigEntry)
node code
7
node name
optIfODUkTtpDEGThr
dot oid
1.3.6.1.2.1.10.133.1.8.2.1.7
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) optIfMibModule(133) optIfObjects(1) optIfODUk(8) optIfODUkTtpConfigTable(2) optIfODUkTtpConfigEntry(1) optIfODUkTtpDEGThr(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) optIfMibModule(133) optIfObjects(1) optIfODUk(8) optIfODUkTtpConfigTable(2) optIfODUkTtpConfigEntry(1) optIfODUkTtpDEGThr(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) optIfMibModule(133) optIfObjects(1) optIfODUk(8) optIfODUkTtpConfigTable(2) optIfODUkTtpConfigEntry(1) optIfODUkTtpDEGThr(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) optIfMibModule(133) optIfObjects(1) optIfODUk(8) optIfODUkTtpConfigTable(2) optIfODUkTtpConfigEntry(1) optIfODUkTtpDEGThr(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) optIfMibModule(133) optIfObjects(1) optIfODUk(8) optIfODUkTtpConfigTable(2) optIfODUkTtpConfigEntry(1) optIfODUkTtpDEGThr(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) optIfMibModule(133) optIfObjects(1) optIfODUk(8) optIfODUkTtpConfigTable(2) optIfODUkTtpConfigEntry(1) optIfODUkTtpDEGThr(7)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/optIfMibModule/optIfObjects/optIfODUk/optIfODUkTtpConfigTable/optIfODUkTtpConfigEntry/optIfODUkTtpDEGThr
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/optIfMibModule/optIfObjects/optIfODUk/optIfODUkTtpConfigTable/optIfODUkTtpConfigEntry/optIfODUkTtpDEGThr
  • /iso/org/dod/internet/mgmt/mib-2/transmission/optIfMibModule/optIfObjects/optIfODUk/optIfODUkTtpConfigTable/optIfODUkTtpConfigEntry/optIfODUkTtpDEGThr
  • /iso/org/dod/internet/mgmt/mib/transmission/optIfMibModule/optIfObjects/optIfODUk/optIfODUkTtpConfigTable/optIfODUkTtpConfigEntry/optIfODUkTtpDEGThr
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/optIfMibModule/optIfObjects/optIfODUk/optIfODUkTtpConfigTable/optIfODUkTtpConfigEntry/optIfODUkTtpDEGThr
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/optIfMibModule/optIfObjects/optIfODUk/optIfODUkTtpConfigTable/optIfODUkTtpConfigEntry/optIfODUkTtpDEGThr
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/133/1/8/2/1/7

    Description by oid_info

    optIfODUkTtpDEGThr OBJECT-TYPE
    SYNTAX OptIfDEGThr
    UNITS "percentage"
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Indicates the threshold level for declaring a performance
    monitoring (PM) Second to be bad. A PM Second is declared bad if
    the percentage of detected errored blocks in that second is
    greater than or equal to optIfODUkDEGThr.
    This object is only applicable to the sink function, i.e.,
    only when optIfODUkDirectionality has the value sink(1)
    or bidirectional(3). It must not be instantiated in rows
    where optIfODUkDirectionality has the value source(2).
    The default value of this object is Severely Errored Second
    (SES) Estimator (See ITU-T G.7710)."
    View at oid-info.com

    Description by mibdepot

    Indicates the threshold level for declaring a performance
    monitoring (PM) Second to be bad. A PM Second is declared bad if
    the percentage of detected errored blocks in that second is
    greater than or equal to optIfODUkDEGThr.
    This object is only applicable to the sink function, i.e.,
    only when optIfODUkDirectionality has the value sink(1)
    or bidirectional(3). It must not be instantiated in rows
    where optIfODUkDirectionality has the value source(2).
    The default value of this object is Severely Errored Second
    (SES) Estimator (See ITU-T G.7710).

    Parsed from file rfc3591-Optical-Interface-Type.mib.txt
    Company: None
    Module: OPT-IF-MIB

    Description by circitor

    Indicates the threshold level for declaring a performance
    monitoring (PM) Second to be bad. A PM Second is declared bad if
    the percentage of detected errored blocks in that second is
    greater than or equal to optIfODUkDEGThr.
    This object is only applicable to the sink function, i.e.,
    only when optIfODUkDirectionality has the value sink(1)
    or bidirectional(3). It must not be instantiated in rows
    where optIfODUkDirectionality has the value source(2).
    The default value of this object is Severely Errored Second
    (SES) Estimator (See ITU-T G.7710).

    Parsed from file OPT-IF-MIB.mib
    Module: OPT-IF-MIB

    Information by oid_info

    Automatically extracted from RFC3591

    Information by mibdepot

    optIfODUkTtpDEGThr OBJECT-TYPE
  SYNTAX  OptIfDEGThr
  UNITS   "percentage"
  MAX-ACCESS  read-write
  STATUS  current
  DESCRIPTION
    "Indicates the threshold level for declaring a performance
     monitoring (PM) Second to be bad.  A PM Second is declared bad if
     the percentage of detected errored blocks in that second is
     greater than or equal to optIfODUkDEGThr.
     This object is only applicable to the sink function, i.e.,
     only when optIfODUkDirectionality has the value sink(1)
     or bidirectional(3).  It must not be instantiated in rows
     where optIfODUkDirectionality has the value source(2).
     The default value of this object is Severely Errored Second
     (SES) Estimator (See ITU-T G.7710)."
  ::= { optIfODUkTtpConfigEntry 7 }

    Information by circitor

    optIfODUkTtpDEGThr OBJECT-TYPE
  SYNTAX  OptIfDEGThr
  UNITS   "percentage"
  MAX-ACCESS  read-write
  STATUS  current
  DESCRIPTION
    "Indicates the threshold level for declaring a performance
     monitoring (PM) Second to be bad.  A PM Second is declared bad if
     the percentage of detected errored blocks in that second is
     greater than or equal to optIfODUkDEGThr.
     This object is only applicable to the sink function, i.e.,
     only when optIfODUkDirectionality has the value sink(1)
     or bidirectional(3).  It must not be instantiated in rows
     where optIfODUkDirectionality has the value source(2).
     The default value of this object is Severely Errored Second
     (SES) Estimator (See ITU-T G.7710)."
  ::= { optIfODUkTtpConfigEntry 7 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (8)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.133.1.8.2.1.1 optIfODUkTtpTraceIdentifierTransmitted 0 0 The trace identifier transmitted.
    This object is applicable when optIfODUkDirectionality
    has the value source(2) or bidirectional…
    1.3.6.1.2.1.10.133.1.8.2.1.2 optIfODUkTtpDAPIExpected 0 0 The DAPI expected by the receiver.
    This object is only applicable to the sink function, i.e.,
    only when optIfODUkDirectionality h…
    1.3.6.1.2.1.10.133.1.8.2.1.3 optIfODUkTtpSAPIExpected 0 0 The SAPI expected by the receiver.
    This object is only applicable to the sink function, i.e.,
    only when optIfODUkDirectionality h…
    1.3.6.1.2.1.10.133.1.8.2.1.4 optIfODUkTtpTraceIdentifierAccepted 0 0 The actual trace identifier accepted.
    This object is only applicable to the sink function, i.e.,
    only when optIfODUkDirectionalit…
    1.3.6.1.2.1.10.133.1.8.2.1.5 optIfODUkTtpTIMDetMode 0 0 Indicates the mode of the Trace Identifier Mismatch (TIM)
    Detection function.
    This object is only applicable to the sink function…
    1.3.6.1.2.1.10.133.1.8.2.1.6 optIfODUkTtpTIMActEnabled 0 0 Indicates whether the Trace Identifier Mismatch (TIM)
    Consequent Action function is enabled.
    This object is only applicable to th…
    1.3.6.1.2.1.10.133.1.8.2.1.8 optIfODUkTtpDEGM 0 0 Indicates the threshold level for declaring a Degraded Signal
    defect (dDEG). A dDEG shall be declared if optIfODUkDEGM
    consecuti…
    1.3.6.1.2.1.10.133.1.8.2.1.9 optIfODUkTtpCurrentStatus 0 0 Indicates the defect condition of the entity, if any.
    This object is only applicable to the sink function, i.e.,
    only when optIfO…