Reference record for OID 1.3.6.1.2.1.10.18.6.1.7


parent
1.3.6.1.2.1.10.18.6.1 (dsx1ConfigEntry)
node code
7
node name
dsx1SendCode
dot oid
1.3.6.1.2.1.10.18.6.1.7
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) ds1(18) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) ds1(18) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) ds1(18) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) ds1(18) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) ds1(18) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) ds1(18) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/org/dod/internet/mgmt/mib-2/transmission/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/org/dod/internet/mgmt/mib/transmission/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/18/6/1/7

    Description by circitor

    This variable indicates what type of code is
    being sent across the DS1 interface by the dev-
    ice. The values mean:

    dsx1SendNoCode
    sending looped or normal data

    dsx1SendLineCode
    sending a request for a line loopback

    dsx1SendPayloadCode
    sending a request for a payload loopback

    dsx1SendResetCode
    sending a loopback termination request

    dsx1SendQRS
    sending a Quasi-Random Signal (QRS) test
    pattern

    dsx1Send511Pattern
    sending a 511 bit fixed test pattern

    dsx1Send3in24Pattern
    sending a fixed test pattern of 3 bits set
    in 24

    dsx1SendOtherTestPattern
    sending a test pattern other than those
    described by this object

    Parsed from file RFC1406-MIB.mib
    Module: RFC1406-MIB

    Description by cisco_v1

    This variable indicates what type of code is
    being sent across the DS1 interface by the device.
    Setting this variable causes the interface to send
    the code requested. The values mean:
    dsx1SendNoCode
    sending looped or normal data

    dsx1SendLineCode
    sending a request for a line loopback

    dsx1SendPayloadCode
    sending a request for a payload loopback

    dsx1SendResetCode
    sending a loopback termination request

    dsx1SendQRS
    sending a Quasi-Random Signal (QRS) test
    pattern

    dsx1Send511Pattern
    sending a 511 bit fixed test pattern

    dsx1Send3in24Pattern
    sending a fixed test pattern of 3 bits set
    in 24

    dsx1SendOtherTestPattern
    sending a test pattern other than those
    described by this object

    Description by oid_info

    dsx1SendCode OBJECT-TYPE
    SYNTAX INTEGER {
    dsx1SendNoCode(1),
    dsx1SendLineCode(2),
    dsx1SendPayloadCode(3),
    dsx1SendResetCode(4),
    dsx1SendQRS(5),
    dsx1Send511Pattern(6),
    dsx1Send3in24Pattern(7),
    dsx1SendOtherTestPattern(8)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "This variable indicates what type of code is
    being sent across the DS1 interface by the device.
    Setting this variable causes the interface to send
    the code requested. The values mean:
    dsx1SendNoCode
    sending looped or normal data
    dsx1SendLineCode
    sending a request for a line loopback
    dsx1SendPayloadCode
    sending a request for a payload loopback
    dsx1SendResetCode
    sending a loopback termination request
    dsx1SendQRS
    sending a Quasi-Random Signal (QRS) test
    pattern
    dsx1Send511Pattern
    sending a 511 bit fixed test pattern
    dsx1Send3in24Pattern
    sending a fixed test pattern of 3 bits set
    in 24
    dsx1SendOtherTestPattern
    sending a test pattern other than those
    described by this object"
    View at oid-info.com

    Description by mibdepot

    This variable indicates what type of code is
    being sent across the DS1 interface by the dev-
    ice. The values mean:

    dsx1SendNoCode
    sending looped or normal data

    dsx1SendLineCode
    sending a request for a line loopback

    dsx1SendPayloadCode
    sending a request for a payload loopback





    dsx1SendResetCode
    sending a loopback termination request

    dsx1SendQRS
    sending a Quasi-Random Signal (QRS) test
    pattern

    dsx1Send511Pattern
    sending a 511 bit fixed test pattern

    dsx1Send3in24Pattern
    sending a fixed test pattern of 3 bits set
    in 24

    dsx1SendOtherTestPattern
    sending a test pattern other than those
    described by this object

    Parsed from file mib_txt_12_3_1_5.txt
    Company: None
    Module: ACC-MIB

    Description by cisco

    This variable indicates what type of code is
    being sent across the DS1 interface by the device.
    Setting this variable causes the interface to send
    the code requested. The values mean:
    dsx1SendNoCode
    sending looped or normal data

    dsx1SendLineCode
    sending a request for a line loopback

    dsx1SendPayloadCode
    sending a request for a payload loopback

    dsx1SendResetCode
    sending a loopback termination request

    dsx1SendQRS
    sending a Quasi-Random Signal (QRS) test
    pattern

    dsx1Send511Pattern
    sending a 511 bit fixed test pattern

    dsx1Send3in24Pattern
    sending a fixed test pattern of 3 bits set
    in 24

    dsx1SendOtherTestPattern
    sending a test pattern other than those
    described by this object

    Information by circitor

    dsx1SendCode OBJECT-TYPE
             SYNTAX  INTEGER {
                         dsx1SendNoCode(1),
                         dsx1SendLineCode(2),
                         dsx1SendPayloadCode(3),
                         dsx1SendResetCode(4),
                         dsx1SendQRS(5),
                         dsx1Send511Pattern(6),
                         dsx1Send3in24Pattern(7),
                         dsx1SendOtherTestPattern(8)
                     }
             ACCESS  read-write
             STATUS  mandatory
             DESCRIPTION
                "This variable indicates what type of  code  is
                being sent across the DS1 interface by the dev-
                ice.  The values mean:

                dsx1SendNoCode
                     sending looped or normal data

                dsx1SendLineCode
                     sending a request for a line loopback

                dsx1SendPayloadCode
                     sending a request for a payload loopback

                dsx1SendResetCode
                     sending a loopback termination request

                dsx1SendQRS
                     sending a Quasi-Random Signal  (QRS)  test
                     pattern

                dsx1Send511Pattern
                     sending a 511 bit fixed test pattern

                dsx1Send3in24Pattern
                     sending a fixed test pattern of 3 bits set
                     in 24

                dsx1SendOtherTestPattern
                     sending a test pattern  other  than  those
                     described by this object"
            ::= { dsx1ConfigEntry 7 }

    Information by cisco_v1

    dsx1SendCode OBJECT-TYPE
    SYNTAX INTEGER {
        dsx1SendNoCode(1),
        dsx1SendLineCode(2),
        dsx1SendPayloadCode(3),
        dsx1SendResetCode(4),
        dsx1SendQRS(5),
        dsx1Send511Pattern(6),
        dsx1Send3in24Pattern(7),
        dsx1SendOtherTestPattern(8)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This variable indicates what type of code is
        being sent across the DS1 interface by the device.
        Setting this variable causes the interface to send
        the code requested.  The values mean:
        dsx1SendNoCode
        sending looped or normal data
        
        dsx1SendLineCode
        sending a request for a line loopback
        
        dsx1SendPayloadCode
        sending a request for a payload loopback
        
        dsx1SendResetCode
        sending a loopback termination request
        
        dsx1SendQRS
        sending a Quasi-Random Signal  (QRS)  test
        pattern
        
        dsx1Send511Pattern
        sending a 511 bit fixed test pattern
        
        dsx1Send3in24Pattern
        sending a fixed test pattern of 3 bits set
        in 24
        
        dsx1SendOtherTestPattern
        sending a test pattern  other  than  those
        described by this object"
    ::= { dsx1ConfigEntry 7 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    dsx1SendCode OBJECT-TYPE
             SYNTAX  INTEGER {
                         dsx1SendNoCode(1),
                         dsx1SendLineCode(2),
                         dsx1SendPayloadCode(3),
                         dsx1SendResetCode(4),
                         dsx1SendQRS(5),
                         dsx1Send511Pattern(6),
                         dsx1Send3in24Pattern(7),
                         dsx1SendOtherTestPattern(8)
                     }
             ACCESS  read-write
             STATUS  mandatory
            ::= { dsx1ConfigEntry 7 }

    Information by cisco

    dsx1SendCode OBJECT-TYPE
          SYNTAX  INTEGER {
                    dsx1SendNoCode(1),
                    dsx1SendLineCode(2),
                    dsx1SendPayloadCode(3),
                    dsx1SendResetCode(4),
                    dsx1SendQRS(5),
                    dsx1Send511Pattern(6),
                    dsx1Send3in24Pattern(7),
                    dsx1SendOtherTestPattern(8)
                    }
          MAX-ACCESS  read-write
          STATUS  current
          DESCRIPTION
                 "This variable indicates what type of code is
                 being sent across the DS1 interface by the device.
                 Setting this variable causes the interface to send
                 the code requested.  The values mean:
           dsx1SendNoCode
                sending looped or normal data

           dsx1SendLineCode
                sending a request for a line loopback

           dsx1SendPayloadCode
                sending a request for a payload loopback

           dsx1SendResetCode
                sending a loopback termination request

           dsx1SendQRS
                sending a Quasi-Random Signal  (QRS)  test
                pattern

           dsx1Send511Pattern
                sending a 511 bit fixed test pattern

           dsx1Send3in24Pattern
                sending a fixed test pattern of 3 bits set
                in 24

           dsx1SendOtherTestPattern
                sending a test pattern  other  than  those
                described by this object"
::= { dsx1ConfigEntry 7 }

    First Registration Authority (recovered by parent 1.3.6.1.2.1.10.18)

    Fowler David

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (24)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.18.6.1.1 dsx1LineIndex 0 0 This object is the identifier of a DS1 Inter-
    face on a managed device. If there is an ifEn-
    try that is directly associated wi…
    1.3.6.1.2.1.10.18.6.1.2 dsx1IfIndex 0 0 This value for this object is equal to the value
    of ifIndex from the Interfaces table of MIB II
    (RFC 1213).
    1.3.6.1.2.1.10.18.6.1.3 dsx1TimeElapsed 0 0 The number of seconds that have elapsed since
    the beginning of the current error-measurement
    period.
    1.3.6.1.2.1.10.18.6.1.4 dsx1ValidIntervals 0 0 The number of previous intervals for which
    valid data was collected. The value will be 96
    unless the interface was brought o…
    1.3.6.1.2.1.10.18.6.1.5 dsx1LineType 0 0 This variable indicates the variety of DS1
    Line implementing this circuit. The type of
    circuit affects the number of bits…
    1.3.6.1.2.1.10.18.6.1.6 dsx1LineCoding 0 0 This variable describes the variety of Zero
    Code Suppression used on the link, which in
    turn affects a number of its chara…
    1.3.6.1.2.1.10.18.6.1.8 dsx1CircuitIdentifier 0 0 This variable contains the transmission vendor's
    circuit identifier, for the purpose of
    facilitating troubleshooting.
    1.3.6.1.2.1.10.18.6.1.9 dsx1LoopbackConfig 0 0 This variable represents the loopback confi-
    guration of the DS1 interface. Agents support-
    ing read/write access should retur…
    1.3.6.1.2.1.10.18.6.1.10 dsx1LineStatus 0 0 This variable indicates the Line Status of the
    interface. It contains loopback, failure, re-
    ceived 'alarm' and transmitted 'a…
    1.3.6.1.2.1.10.18.6.1.11 dsx1SignalMode 0 0 'none' indicates that no bits are reserved for
    signaling on this channel.

    'robbedBit' indicates that T1 Robbed Bit Sig-
    naling is…
    1.3.6.1.2.1.10.18.6.1.12 dsx1TransmitClockSource 0 0 The source of Tranmit Clock.
    'loopTiming' indicates that the recovered re-
    ceive clock is used as the transmit clock.

    'localTimin…
    1.3.6.1.2.1.10.18.6.1.13 dsx1Fdl 0 0 This bitmap describes the use of the facili-
    ties data link, and is the sum of the capabili-
    ties:

    'other' indicates that a prot…
    1.3.6.1.2.1.10.18.6.1.14 dsx1InvalidIntervals 0 0 The number of intervals for which no valid data
    is available.
    1.3.6.1.2.1.10.18.6.1.15 dsx1LineLength 0 0 The length of the ds1 line in meters. This
    objects provides information for line build out
    circuitry if it exists and can use thi…
    1.3.6.1.2.1.10.18.6.1.16 dsx1LineStatusLastChange 0 0 The value of MIB II's sysUpTime object at the
    time this DS1 entered its current line status
    state. If the current state was ente…
    1.3.6.1.2.1.10.18.6.1.17 dsx1LineStatusChangeTrapEnable 0 0 Indicates whether dsx1LineStatusChange traps
    should be generated for this interface.
    1.3.6.1.2.1.10.18.6.1.18 dsx1LoopbackStatus 0 0 This variable represents the current state of the
    loopback on the DS1 interface. It contains
    information about loopbacks establi…
    1.3.6.1.2.1.10.18.6.1.19 dsx1Ds1ChannelNumber 0 0 This variable represents the channel number of
    the DS1/E1 on its parent Ds2/E2 or DS3/E3. A
    value of 0 indicated this DS1/E1 doe…
    1.3.6.1.2.1.10.18.6.1.20 dsx1Channelization 0 0 Indicates whether this ds1/e1 is channelized or
    unchannelized. The value of enabledDs0 indicates
    that this is a DS1 channelized …
    1.3.6.1.2.1.10.18.6.1.21 dsx1LineMode 0 0 This setting puts the T1 framer into either long
    haul (CSU) mode or short haul (DSU) mode.
    1.3.6.1.2.1.10.18.6.1.22 dsx1LineBuildOut 0 0 Attenuation setting for T1 framer in long haul
    (CSU) mode. The optional values are: -7.5dB,
    -15dB, -22.5dB and 0dB.
    1.3.6.1.2.1.10.18.6.1.23 dsx1LineImpedance 0 0 dsx1LineImpedance OBJECT-TYPE
    SYNTAX INTEGER {
    notApplicable(1),
    unbalanced75ohms(2),
    balanced100ohms(3),
    balanced120ohms(4)
    }
    …
    1.3.6.1.2.1.10.18.6.1.100 dsx1LineBuildOut 0 0 None
    1.3.6.1.2.1.10.18.6.1.101 dsx1PerformanceReport 0 0 None