Reference record for OID 1.3.6.1.2.1.10.227.1.10.1


parent
1.3.6.1.2.1.10.227.1.10 (lmpControlChannelTable)
node code
1
node name
lmpControlChannelEntry
dot oid
1.3.6.1.2.1.10.227.1.10.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) lmpMIB(227) lmpObjects(1) lmpControlChannelTable(10) lmpControlChannelEntry(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) lmpMIB(227) lmpObjects(1) lmpControlChannelTable(10) lmpControlChannelEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) lmpMIB(227) lmpObjects(1) lmpControlChannelTable(10) lmpControlChannelEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) lmpMIB(227) lmpObjects(1) lmpControlChannelTable(10) lmpControlChannelEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) lmpMIB(227) lmpObjects(1) lmpControlChannelTable(10) lmpControlChannelEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) lmpMIB(227) lmpObjects(1) lmpControlChannelTable(10) lmpControlChannelEntry(1)}
  • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/lmpMIB/lmpObjects/lmpControlChannelTable/lmpControlChannelEntry
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/lmpMIB/lmpObjects/lmpControlChannelTable/lmpControlChannelEntry
  • /iso/org/dod/internet/mgmt/mib-2/transmission/lmpMIB/lmpObjects/lmpControlChannelTable/lmpControlChannelEntry
  • /iso/org/dod/internet/mgmt/mib/transmission/lmpMIB/lmpObjects/lmpControlChannelTable/lmpControlChannelEntry
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/lmpMIB/lmpObjects/lmpControlChannelTable/lmpControlChannelEntry
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/lmpMIB/lmpObjects/lmpControlChannelTable/lmpControlChannelEntry
  • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/227/1/10/1

    Description by oid_info

    lmpControlChannelEntry OBJECT-TYPE
    SYNTAX LmpControlChannelEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "An entry in this table is created by a LMP-enabled device for
    every control channel. Whenever a new entry is created with
    lmpCcIsIf set to true(2), then a corresponding entry is
    created in iftable as well (see RFC 2863)."
    INDEX { lmpCcId }

    View at oid-info.com

    Description by circitor

    An entry in this table is created by an LMP-enabled device for
    every control channel. Whenever a new entry is created with
    lmpCcIsIf set to true(1), a corresponding entry is
    created in ifTable as well (see RFC 2863).

    Parsed from file LMP-MIB.mib
    Module: LMP-MIB

    Information by oid_info

    Automatically extracted from RFC4327

    Information by circitor

    lmpControlChannelEntry OBJECT-TYPE SYNTAX LmpControlChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by an LMP-enabled device for every control channel. Whenever a new entry is created with lmpCcIsIf set to true(1), a corresponding entry is created in ifTable as well (see RFC 2863)." INDEX { lmpCcId } ::= { lmpControlChannelTable 1 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Children (22)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.227.1.10.1.1 lmpCcId 0 0 This value represents the local control channel identifier.
    The control channel identifier is a non-zero 32-bit number.
    1.3.6.1.2.1.10.227.1.10.1.2 lmpCcUnderlyingIfIndex 0 0 If lmpCcIsIf is set to true(1), this object carries the
    index into the ifTable of the entry that represents the
    LMP interface ove…
    1.3.6.1.2.1.10.227.1.10.1.3 lmpCcIsIf 0 0 In implementations where the control channels are modeled
    as interfaces, the value of this object is true(1), and
    this control ch…
    1.3.6.1.2.1.10.227.1.10.1.4 lmpCcNbrNodeId 0 0 This is the Node ID of the control channel remote node.
    This value either is configured or gets created by the node
    when a Config…
    1.3.6.1.2.1.10.227.1.10.1.5 lmpCcRemoteId 0 0 This value represents the remote control channel identifier
    (32-bit number). It is determined during the negotiation
    phase. A v…
    1.3.6.1.2.1.10.227.1.10.1.6 lmpCcRemoteAddressType 0 0 This value represents the remote control channel IP address
    type. In point-to-point configuration, this value can be set
    to unkn…
    1.3.6.1.2.1.10.227.1.10.1.7 lmpCcRemoteIpAddr 0 0 This value represents the remote control channel Internet
    address for numbered control channel. The type of this
    address is dete…
    1.3.6.1.2.1.10.227.1.10.1.8 lmpCcSetupRole 0 0 The role that this node should take during establishment
    of this control channel. An active node will initiate
    establishment. A…
    1.3.6.1.2.1.10.227.1.10.1.9 lmpCcAuthentication 0 0 This object indicates whether the control channel must use
    authentication.
    1.3.6.1.2.1.10.227.1.10.1.10 lmpCcHelloInterval 0 0 This object specifies the value of the HelloInterval
    parameter. The default value for this object should be
    set to lmpCcHelloInt…
    1.3.6.1.2.1.10.227.1.10.1.11 lmpCcHelloIntervalMin 0 0 This object specifies the minimum value for the
    HelloInterval parameter. The default value for this
    object should be set to lmpC…
    1.3.6.1.2.1.10.227.1.10.1.12 lmpCcHelloIntervalMax 0 0 This object specifies the maximum value for the
    HelloInterval parameter. The default value for this
    object should be set to lmpC…
    1.3.6.1.2.1.10.227.1.10.1.13 lmpCcHelloIntervalNegotiated 0 0 Once the control channel is active, this object represents
    the negotiated HelloInterval value.
    1.3.6.1.2.1.10.227.1.10.1.14 lmpCcHelloDeadInterval 0 0 This object specifies the value of the HelloDeadInterval
    parameter. The default value for this object should be
    set to lmpCcHell…
    1.3.6.1.2.1.10.227.1.10.1.15 lmpCcHelloDeadIntervalMin 0 0 This object specifies the minimum value for the
    HelloDeadInterval parameter. The default value for this
    object should be set to …
    1.3.6.1.2.1.10.227.1.10.1.16 lmpCcHelloDeadIntervalMax 0 0 This object specifies the maximum value for the
    HelloDeadInterval parameter. The default value for this
    object should be set to …
    1.3.6.1.2.1.10.227.1.10.1.17 lmpCcHelloDeadIntervalNegotiated 0 0 Once the control channel is active, this object represents
    the negotiated HelloDeadInterval value.
    1.3.6.1.2.1.10.227.1.10.1.18 lmpCcLastChange 0 0 The value of sysUpTime at the time the control channel entered
    its current operational state. If the current state was
    entered p…
    1.3.6.1.2.1.10.227.1.10.1.19 lmpCcAdminStatus 0 0 The desired operational status of this control channel.
    1.3.6.1.2.1.10.227.1.10.1.20 lmpCcOperStatus 0 0 The actual operational status of this control channel.
    1.3.6.1.2.1.10.227.1.10.1.21 lmpCcRowStatus 0 0 This variable is used to create, modify, and/or
    delete a row in this table. None of the writable objects
    in a row can be changed…
    1.3.6.1.2.1.10.227.1.10.1.22 lmpCcStorageType 0 0 The storage type for this conceptual row in the
    lmpControlChannelTable. Conceptual rows having the value
    'permanent' need not al…